3d printer used by Ohmbase Openspace/Makerspace/Hackerspace before it was shut down
Jeff Cliff
929b847f6f
duplicate
|
9 年之前 | |
|---|---|---|
| ARDUINO_FILES_kliment-Sprinter(MixG1) | 9 年之前 | |
| config | 9 年之前 | |
| Extruder Motor Holder.STL | 9 年之前 | |
| README.md | 9 年之前 | |
| Sprinter_3_Calibrated_Files.zip | 9 年之前 | |
| arduino-0023.zip | 9 年之前 | |
| bar-clamp.stl | 9 年之前 | |
| base-hook.stl | 9 年之前 | |
| base-top-2_pp.stl | 9 年之前 | |
| base.STL | 9 年之前 | |
| base_part_1_pp.stl | 9 年之前 | |
| base_part_2_pp.stl | 9 年之前 | |
| extruder_plastic_3.0_pp.stl | 9 年之前 | |
| extruder_push_pp2.stl | 9 年之前 | |
| plate_base_1_pp-DIFF.stl | 9 年之前 | |
| plate_base_1_pp.stl | 9 年之前 | |
| power-plug.stl | 9 年之前 | |
| power-supply-hook-pp.stl | 9 年之前 | |
| power-switch.stl | 9 年之前 | |
| pulley.stl | 9 年之前 | |
| recipe | 9 年之前 | |
| small_endstop_holder.STL | 9 年之前 | |
| x-holder-pp-DIFF.stl | 9 年之前 | |
| x-motor-holder-2-pp.stl | 9 年之前 | |
| x-motor-holder-4_pp.stl | 9 年之前 | |
| y-motor-holder_pp.stl | 9 年之前 | |
| z-coupler.stl | 9 年之前 | |
| z-holder.stl | 9 年之前 |
README.md
This is the 2nd 3d printer that Ohmbase uses. We've had it since around late 2013?
The design of Mix G1 is based on Wallace. The main advantage is the mechanical structure, which is easy to understand, build, and does not need much calibration . Mix G1 has one of the smallest nozzle size(0.34mm) that results great printing quality once you have it running. The printing speed can go up to 150mm/s for infill, and the layer hight is as thin as 0.17mm(can't even see the layers). You can check the picture of printed objects at http://blog.mixshop.com/tagged/mix-g1-printing. Download a full archive of parts here: http://file.mixshop.com/forum/upload/g1/Mix%20G1_plastic_parts.zip many seem to be missing below
from http://reprap.org/wiki/Mix_g1
Description Mix G1 License GPL Author Jing.guo http://reprap.org/wiki/User:Jing.guo Based-on Wallace http://reprap.org/wiki/Wallace Categories Cartesian-XZ-head External Link http://www.mixshop.com/