Halaman utama Jelajahi Bantuan
Masuk
themusicgod1
/
ohmbase-mix-g1-3dprinter
Liatin 0
Bintangi 0
Fork 0
Berkas Masalah 0 Tarik Permintaan 0 Wiki

3d printer used by Ohmbase Openspace/Makerspace/Hackerspace before it was shut down

Cabang: master
Ranting Tag
ohmbase-mix-...
ZIP TAR.GZ
Jeff Cliff 929b847f6f duplicate 9 tahun lalu
ARDUINO_FILES_kliment-Sprinter(MixG1) eb8ce7e5b1 added files that were used to setup printer and deleting 4x base 9 tahun lalu
config 2087e0d67c slic3r from AFTER move 9 tahun lalu
Extruder Motor Holder.STL d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
README.md 82baf292f6 deets 9 tahun lalu
Sprinter_3_Calibrated_Files.zip eb8ce7e5b1 added files that were used to setup printer and deleting 4x base 9 tahun lalu
arduino-0023.zip eb8ce7e5b1 added files that were used to setup printer and deleting 4x base 9 tahun lalu
bar-clamp.stl 6efc4f46a7 missed one- bar clamp 9 tahun lalu
base-hook.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
base-top-2_pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
base.STL 3c32a31f52 real changes, not the last set of changes 9 tahun lalu
base_part_1_pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
base_part_2_pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
extruder_plastic_3.0_pp.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
extruder_push_pp2.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
plate_base_1_pp-DIFF.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
plate_base_1_pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
power-plug.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
power-supply-hook-pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
power-switch.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
pulley.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
recipe e779741855 Update recipe 9 tahun lalu
small_endstop_holder.STL d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
x-holder-pp-DIFF.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
x-motor-holder-2-pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
x-motor-holder-4_pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
y-motor-holder_pp.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu
z-coupler.stl d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3? 9 tahun lalu
z-holder.stl 562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1 9 tahun lalu

README.md

This is the 2nd 3d printer that Ohmbase uses. We've had it since around late 2013?

The design of Mix G1 is based on Wallace. The main advantage is the mechanical structure, which is easy to understand, build, and does not need much calibration . Mix G1 has one of the smallest nozzle size(0.34mm) that results great printing quality once you have it running. The printing speed can go up to 150mm/s for infill, and the layer hight is as thin as 0.17mm(can't even see the layers). You can check the picture of printed objects at http://blog.mixshop.com/tagged/mix-g1-printing. Download a full archive of parts here: http://file.mixshop.com/forum/upload/g1/Mix%20G1_plastic_parts.zip many seem to be missing below

from http://reprap.org/wiki/Mix_g1

Description Mix G1 License GPL Author Jing.guo http://reprap.org/wiki/User:Jing.guo Based-on Wallace http://reprap.org/wiki/Wallace Categories Cartesian-XZ-head External Link http://www.mixshop.com/