themusicgod1/ohmbase-mix-g1-3dprinter: 3d printer used by Ohmbase Openspace/Makerspace/Hackerspace before it was shut down

3d printer used by Ohmbase Openspace/Makerspace/Hackerspace before it was shut down

Jeff Cliff 929b847f6f duplicate		пре 9 година
ARDUINO_FILES_kliment-Sprinter(MixG1)	eb8ce7e5b1 added files that were used to setup printer and deleting 4x base	пре 9 година
config	2087e0d67c slic3r from AFTER move	пре 9 година
Extruder Motor Holder.STL	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
README.md	82baf292f6 deets	пре 9 година
Sprinter_3_Calibrated_Files.zip	eb8ce7e5b1 added files that were used to setup printer and deleting 4x base	пре 9 година
arduino-0023.zip	eb8ce7e5b1 added files that were used to setup printer and deleting 4x base	пре 9 година
bar-clamp.stl	6efc4f46a7 missed one- bar clamp	пре 9 година
base-hook.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
base-top-2_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
base.STL	3c32a31f52 real changes, not the last set of changes	пре 9 година
base_part_1_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
base_part_2_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
extruder_plastic_3.0_pp.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
extruder_push_pp2.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
plate_base_1_pp-DIFF.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
plate_base_1_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
power-plug.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
power-supply-hook-pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
power-switch.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
pulley.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
recipe	e779741855 Update recipe	пре 9 година
small_endstop_holder.STL	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
x-holder-pp-DIFF.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
x-motor-holder-2-pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
x-motor-holder-4_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
y-motor-holder_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година
z-coupler.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	пре 9 година
z-holder.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	пре 9 година

This is the 2nd 3d printer that Ohmbase uses. We've had it since around late 2013?

The design of Mix G1 is based on Wallace. The main advantage is the mechanical structure, which is easy to understand, build, and does not need much calibration . Mix G1 has one of the smallest nozzle size(0.34mm) that results great printing quality once you have it running. The printing speed can go up to 150mm/s for infill, and the layer hight is as thin as 0.17mm(can't even see the layers). You can check the picture of printed objects at http://blog.mixshop.com/tagged/mix-g1-printing. Download a full archive of parts here: http://file.mixshop.com/forum/upload/g1/Mix%20G1_plastic_parts.zip many seem to be missing below

from http://reprap.org/wiki/Mix_g1

Description Mix G1 License GPL Author Jing.guo http://reprap.org/wiki/User:Jing.guo Based-on Wallace http://reprap.org/wiki/Wallace Categories Cartesian-XZ-head External Link http://www.mixshop.com/

README.md