themusicgod1/ohmbase-mix-g1-3dprinter: 3d printer used by Ohmbase Openspace/Makerspace/Hackerspace before it was shut down

3d printer used by Ohmbase Openspace/Makerspace/Hackerspace before it was shut down

Jeff Cliff 929b847f6f duplicate		%!s(int64=9) %!d(string=hai) anos
ARDUINO_FILES_kliment-Sprinter(MixG1)	eb8ce7e5b1 added files that were used to setup printer and deleting 4x base	%!s(int64=9) %!d(string=hai) anos
config	2087e0d67c slic3r from AFTER move	%!s(int64=9) %!d(string=hai) anos
Extruder Motor Holder.STL	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
README.md	82baf292f6 deets	%!s(int64=9) %!d(string=hai) anos
Sprinter_3_Calibrated_Files.zip	eb8ce7e5b1 added files that were used to setup printer and deleting 4x base	%!s(int64=9) %!d(string=hai) anos
arduino-0023.zip	eb8ce7e5b1 added files that were used to setup printer and deleting 4x base	%!s(int64=9) %!d(string=hai) anos
bar-clamp.stl	6efc4f46a7 missed one- bar clamp	%!s(int64=9) %!d(string=hai) anos
base-hook.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
base-top-2_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
base.STL	3c32a31f52 real changes, not the last set of changes	%!s(int64=9) %!d(string=hai) anos
base_part_1_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
base_part_2_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
extruder_plastic_3.0_pp.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
extruder_push_pp2.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
plate_base_1_pp-DIFF.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
plate_base_1_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
power-plug.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
power-supply-hook-pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
power-switch.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
pulley.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
recipe	e779741855 Update recipe	%!s(int64=9) %!d(string=hai) anos
small_endstop_holder.STL	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
x-holder-pp-DIFF.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
x-motor-holder-2-pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
x-motor-holder-4_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
y-motor-holder_pp.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos
z-coupler.stl	d1ea53dc51 Stuff that was in the main "zip" file, incl hopefully the whole printer this time. Apparently it might be version 3?	%!s(int64=9) %!d(string=hai) anos
z-holder.stl	562f77d447 adding stl files from http://reprap.org/wiki/Mix_g1	%!s(int64=9) %!d(string=hai) anos

This is the 2nd 3d printer that Ohmbase uses. We've had it since around late 2013?

The design of Mix G1 is based on Wallace. The main advantage is the mechanical structure, which is easy to understand, build, and does not need much calibration . Mix G1 has one of the smallest nozzle size(0.34mm) that results great printing quality once you have it running. The printing speed can go up to 150mm/s for infill, and the layer hight is as thin as 0.17mm(can't even see the layers). You can check the picture of printed objects at http://blog.mixshop.com/tagged/mix-g1-printing. Download a full archive of parts here: http://file.mixshop.com/forum/upload/g1/Mix%20G1_plastic_parts.zip many seem to be missing below

from http://reprap.org/wiki/Mix_g1

Description Mix G1 License GPL Author Jing.guo http://reprap.org/wiki/User:Jing.guo Based-on Wallace http://reprap.org/wiki/Wallace Categories Cartesian-XZ-head External Link http://www.mixshop.com/

README.md