rsa_pk1.c 8.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276
  1. /* crypto/rsa/rsa_pk1.c */
  2. /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  3. * All rights reserved.
  4. *
  5. * This package is an SSL implementation written
  6. * by Eric Young (eay@cryptsoft.com).
  7. * The implementation was written so as to conform with Netscapes SSL.
  8. *
  9. * This library is free for commercial and non-commercial use as long as
  10. * the following conditions are aheared to. The following conditions
  11. * apply to all code found in this distribution, be it the RC4, RSA,
  12. * lhash, DES, etc., code; not just the SSL code. The SSL documentation
  13. * included with this distribution is covered by the same copyright terms
  14. * except that the holder is Tim Hudson (tjh@cryptsoft.com).
  15. *
  16. * Copyright remains Eric Young's, and as such any Copyright notices in
  17. * the code are not to be removed.
  18. * If this package is used in a product, Eric Young should be given attribution
  19. * as the author of the parts of the library used.
  20. * This can be in the form of a textual message at program startup or
  21. * in documentation (online or textual) provided with the package.
  22. *
  23. * Redistribution and use in source and binary forms, with or without
  24. * modification, are permitted provided that the following conditions
  25. * are met:
  26. * 1. Redistributions of source code must retain the copyright
  27. * notice, this list of conditions and the following disclaimer.
  28. * 2. Redistributions in binary form must reproduce the above copyright
  29. * notice, this list of conditions and the following disclaimer in the
  30. * documentation and/or other materials provided with the distribution.
  31. * 3. All advertising materials mentioning features or use of this software
  32. * must display the following acknowledgement:
  33. * "This product includes cryptographic software written by
  34. * Eric Young (eay@cryptsoft.com)"
  35. * The word 'cryptographic' can be left out if the rouines from the library
  36. * being used are not cryptographic related :-).
  37. * 4. If you include any Windows specific code (or a derivative thereof) from
  38. * the apps directory (application code) you must include an acknowledgement:
  39. * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
  40. *
  41. * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
  42. * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  43. * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  44. * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  45. * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  46. * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  47. * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  48. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  49. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  50. * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  51. * SUCH DAMAGE.
  52. *
  53. * The licence and distribution terms for any publically available version or
  54. * derivative of this code cannot be changed. i.e. this code cannot simply be
  55. * copied and put under another distribution licence
  56. * [including the GNU Public Licence.]
  57. */
  58. #include "constant_time_locl.h"
  59. #include <stdio.h>
  60. #include "cryptlib.h"
  61. #include <openssl/bn.h>
  62. #include <openssl/rsa.h>
  63. #include <openssl/rand.h>
  64. int RSA_padding_add_PKCS1_type_1(unsigned char *to, int tlen,
  65. const unsigned char *from, int flen)
  66. {
  67. int j;
  68. unsigned char *p;
  69. if (flen > (tlen - RSA_PKCS1_PADDING_SIZE)) {
  70. RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_1,
  71. RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
  72. return (0);
  73. }
  74. p = (unsigned char *)to;
  75. *(p++) = 0;
  76. *(p++) = 1; /* Private Key BT (Block Type) */
  77. /* pad out with 0xff data */
  78. j = tlen - 3 - flen;
  79. memset(p, 0xff, j);
  80. p += j;
  81. *(p++) = '\0';
  82. memcpy(p, from, (unsigned int)flen);
  83. return (1);
  84. }
  85. int RSA_padding_check_PKCS1_type_1(unsigned char *to, int tlen,
  86. const unsigned char *from, int flen,
  87. int num)
  88. {
  89. int i, j;
  90. const unsigned char *p;
  91. p = from;
  92. if ((num != (flen + 1)) || (*(p++) != 01)) {
  93. RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
  94. RSA_R_BLOCK_TYPE_IS_NOT_01);
  95. return (-1);
  96. }
  97. /* scan over padding data */
  98. j = flen - 1; /* one for type. */
  99. for (i = 0; i < j; i++) {
  100. if (*p != 0xff) { /* should decrypt to 0xff */
  101. if (*p == 0) {
  102. p++;
  103. break;
  104. } else {
  105. RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
  106. RSA_R_BAD_FIXED_HEADER_DECRYPT);
  107. return (-1);
  108. }
  109. }
  110. p++;
  111. }
  112. if (i == j) {
  113. RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
  114. RSA_R_NULL_BEFORE_BLOCK_MISSING);
  115. return (-1);
  116. }
  117. if (i < 8) {
  118. RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
  119. RSA_R_BAD_PAD_BYTE_COUNT);
  120. return (-1);
  121. }
  122. i++; /* Skip over the '\0' */
  123. j -= i;
  124. if (j > tlen) {
  125. RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1, RSA_R_DATA_TOO_LARGE);
  126. return (-1);
  127. }
  128. memcpy(to, p, (unsigned int)j);
  129. return (j);
  130. }
  131. int RSA_padding_add_PKCS1_type_2(unsigned char *to, int tlen,
  132. const unsigned char *from, int flen)
  133. {
  134. int i, j;
  135. unsigned char *p;
  136. if (flen > (tlen - 11)) {
  137. RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_2,
  138. RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
  139. return (0);
  140. }
  141. p = (unsigned char *)to;
  142. *(p++) = 0;
  143. *(p++) = 2; /* Public Key BT (Block Type) */
  144. /* pad out with non-zero random data */
  145. j = tlen - 3 - flen;
  146. if (RAND_bytes(p, j) <= 0)
  147. return (0);
  148. for (i = 0; i < j; i++) {
  149. if (*p == '\0')
  150. do {
  151. if (RAND_bytes(p, 1) <= 0)
  152. return (0);
  153. } while (*p == '\0');
  154. p++;
  155. }
  156. *(p++) = '\0';
  157. memcpy(p, from, (unsigned int)flen);
  158. return (1);
  159. }
  160. int RSA_padding_check_PKCS1_type_2(unsigned char *to, int tlen,
  161. const unsigned char *from, int flen,
  162. int num)
  163. {
  164. int i;
  165. /* |em| is the encoded message, zero-padded to exactly |num| bytes */
  166. unsigned char *em = NULL;
  167. unsigned int good, found_zero_byte;
  168. int zero_index = 0, msg_index, mlen = -1;
  169. if (tlen < 0 || flen < 0)
  170. return -1;
  171. /*
  172. * PKCS#1 v1.5 decryption. See "PKCS #1 v2.2: RSA Cryptography Standard",
  173. * section 7.2.2.
  174. */
  175. if (flen > num)
  176. goto err;
  177. if (num < 11)
  178. goto err;
  179. em = OPENSSL_malloc(num);
  180. if (em == NULL) {
  181. RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2, ERR_R_MALLOC_FAILURE);
  182. return -1;
  183. }
  184. memset(em, 0, num);
  185. /*
  186. * Always do this zero-padding copy (even when num == flen) to avoid
  187. * leaking that information. The copy still leaks some side-channel
  188. * information, but it's impossible to have a fixed memory access
  189. * pattern since we can't read out of the bounds of |from|.
  190. *
  191. * TODO(emilia): Consider porting BN_bn2bin_padded from BoringSSL.
  192. */
  193. memcpy(em + num - flen, from, flen);
  194. good = constant_time_is_zero(em[0]);
  195. good &= constant_time_eq(em[1], 2);
  196. found_zero_byte = 0;
  197. for (i = 2; i < num; i++) {
  198. unsigned int equals0 = constant_time_is_zero(em[i]);
  199. zero_index =
  200. constant_time_select_int(~found_zero_byte & equals0, i,
  201. zero_index);
  202. found_zero_byte |= equals0;
  203. }
  204. /*
  205. * PS must be at least 8 bytes long, and it starts two bytes into |em|.
  206. * If we never found a 0-byte, then |zero_index| is 0 and the check
  207. * also fails.
  208. */
  209. good &= constant_time_ge((unsigned int)(zero_index), 2 + 8);
  210. /*
  211. * Skip the zero byte. This is incorrect if we never found a zero-byte
  212. * but in this case we also do not copy the message out.
  213. */
  214. msg_index = zero_index + 1;
  215. mlen = num - msg_index;
  216. /*
  217. * For good measure, do this check in constant time as well; it could
  218. * leak something if |tlen| was assuming valid padding.
  219. */
  220. good &= constant_time_ge((unsigned int)(tlen), (unsigned int)(mlen));
  221. /*
  222. * We can't continue in constant-time because we need to copy the result
  223. * and we cannot fake its length. This unavoidably leaks timing
  224. * information at the API boundary.
  225. * TODO(emilia): this could be addressed at the call site,
  226. * see BoringSSL commit 0aa0767340baf925bda4804882aab0cb974b2d26.
  227. */
  228. if (!good) {
  229. mlen = -1;
  230. goto err;
  231. }
  232. memcpy(to, em + msg_index, mlen);
  233. err:
  234. if (em != NULL)
  235. OPENSSL_free(em);
  236. if (mlen == -1)
  237. RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2,
  238. RSA_R_PKCS_DECODING_ERROR);
  239. return mlen;
  240. }