guile

This is version 1.8.7 of Guile, Project GNU's extension language
library. Guile is an interpreter for Scheme, packaged as a library
that you can link into your applications to give them their own
scripting language. Guile will eventually support other languages as
well, giving users of Guile-based applications a choice of languages.

Please send bug reports to bug-guile@gnu.org.

See the LICENSE file for the specific terms that apply to Guile.


Additional INSTALL instructions ===========================================

Generic instructions for configuring and compiling Guile can be found
in the INSTALL file. Guile specific information and configure options
can be found below, including instructions for installing SLIB.

Guile requires a few external packages and can optionally use a number
of external packages such as `readline' when they are available.
Guile expects to be able to find these packages in the default
compiler setup, it does not try to make any special arrangements
itself. For example, for the `readline' package, Guile expects to be
able to find the include file , without passing
any special `-I' options to the compiler.

If you installed an external package, and you used the --prefix
installation option to install it somewhere else than /usr/local, you
must arrange for your compiler to find it by default. If that
compiler is gcc, one convenient way of making such arrangements is to
use the --with-local-prefix option during installation, naming the
same directory as you used in the --prefix option of the package. In
particular, it is not good enough to use the same --prefix option when
you install gcc and the package; you need to use the
--with-local-prefix option as well. See the gcc documentation for
more details.


Required External Packages ================================================

Guile requires the following external packages:

- GNU MP, at least version 4.1

GNU MP is used for bignum arithmetic. It is available from
http://swox.com/gmp

- libltdl from libtool, at least from libtool version 1.5.6

libltdl is used for loading extensions at run-time. It is
available from http://www.gnu.org/software/libtool/


Guile specific flags Accepted by Configure =================================

If you run the configure script with no arguments, it should examine
your system and set things up appropriately. However, there are a few
switches specific to Guile you may find useful in some circumstances.

--without-threads --- Build without thread support

Build a Guile executable and library that supports multi-threading.

The default is to enable threading support when your operating
system offsers 'POSIX threads'. When you do not want threading, use
`--without-threads'.

--enable-deprecated=LEVEL

Guile may contain features that are `deprecated'. When a feature is
deprecated, it means that it is still there, but that there is a
better way of achieving the same thing, and we'd rather have you use
this better way. This allows us to eventually remove the old
implementation and helps to keep Guile reasonably clean of historic
baggage.

Deprecated features are considered harmful; using them is likely a
bug. See below for the related notion of `discouraged' features,
which are OK but have fallen out of favor.

See the file NEWS for a list of features that are currently
deprecated. Each entry will also tell you what you should replace
your code with.

To give you some help with this process, and to encourage (OK,
nudge) people to switch to the newer methods, Guile can emit
warnings or errors when you use a deprecated feature. There is
quite a range of possibilities, from being completely silent to
giving errors at link time. What exactly happens is determined both
by the value of the `--enable-deprecated' configuration option when
Guile was built, and by the GUILE_WARN_DEPRECATED environment
variable.

It works like this:

When Guile has been configured with `--enable-deprecated=no' (or,
equivalently, with `--disable-deprecated') then all deprecated
features are omitted from Guile. You will get "undefined
reference", "variable unbound" or similar errors when you try to
use them.

When `--enable-deprecated=LEVEL' has been specified (for LEVEL not
"no"), LEVEL will be used as the default value of the environment
variable GUILE_WARN_DEPRECATED. A value of "yes" is changed to
"summary" and "shutup" is changed to "no", however.

When GUILE_WARN_DEPRECATED has the value "no", nothing special
will happen when a deprecated feature is used.

When GUILE_WARN_DEPRECATED has the value "summary", and a
deprecated feature has been used, Guile will print this message at
exit:

Some deprecated features have been used. Set the environment
variable GUILE_WARN_DEPRECATED to "detailed" and rerun the
program to get more information. Set it to "no" to suppress
this message.

When GUILE_WARN_DEPRECATED has the value "detailed", a detailed
warning is emitted immediatly for the first use of a deprecated
feature.

The default is `--enable-deprecated=yes'.

In addition to setting GUILE_WARN_DEPRECATED in the environment, you
can also use (debug-enable 'warn-deprecated) and (debug-disable
'warn-deprecated) to enable and disable the detailed messaged at run
time.

--disable-discouraged

In addition to deprecated features, Guile can also contain things
that are merely `discouraged'. It is OK to continue to use these
features in old code, but new code should avoid them since there are
better alternatives.

There is nothing wrong with a discouraged feature per se, but they
might have strange names, or be non-standard, for example. Avoiding
them will make your code better.

--disable-shared --- Do not build shared libraries.
--disable-static --- Do not build static libraries.

Normally, both static and shared libraries will be built if your
system supports them.

--enable-debug-freelist --- Enable freelist debugging.

This enables a debugging version of scm_cell and scm_double_cell,
and also registers an extra primitive, the setter
`gc-set-debug-check-freelist!'.

Configure with the --enable-debug-freelist option to enable the
gc-set-debug-check-freelist! primitive, and then use:

(gc-set-debug-check-freelist! #t) # turn on checking of the freelist
(gc-set-debug-check-freelist! #f) # turn off checking

Checking of the freelist forces a traversal of the freelist and a
garbage collection before each allocation of a cell. This can slow
down the interpreter dramatically, so the setter should be used to
turn on this extra processing only when necessary.

--enable-debug-malloc --- Enable malloc debugging.

Include code for debugging of calls to scm_malloc, scm_realloc, etc.

It records the number of allocated objects of each kind. This is
useful when searching for memory leaks.

A Guile compiled with this option provides the primitive
`malloc-stats' which returns an alist with pairs of kind and the
number of objects of that kind.

--enable-guile-debug --- Include internal debugging functions
--disable-posix --- omit posix interfaces
--disable-networking --- omit networking interfaces
--disable-regex --- omit regular expression interfaces


Cross building Guile =====================================================

Guile can be cross-compiled for Windows using the i586-mingw32msvc
cross-compiler. To do this, you first need to cross-build Guile's
prerequisites - GNU MP and libtool/libltdl (as described above) - and
then cross-build Guile itself.

For each of these steps, configure using an invocation like this:

CPPFLAGS=-I/usr/local/i586-mingw32msvc/include \
LDFLAGS=-L/usr/local/i586-mingw32msvc/lib \
GUILE_FOR_BUILD=/usr/local/bin/guile \
./configure --prefix=/usr/local/i586-mingw32msvc --host=i586-mingw32msvc

Then run `make' - which should complete without any errors - and `sudo
make install'. (`make check' doesn't work when cross-compiling,
because the built DLLs and program cannot be run on GNU/Linux.)

The `GUILE_FOR_BUILD=...' setting is needed because some later steps
of the build process use Guile itself. In the non-cross-compiling
case this is the version of Guile that has just been built. When
cross-compiling, you have to set GUILE_FOR_BUILD to tell the build
where it can find a native version of Guile, to use for these steps.

Cross-compiling for other hosts may also work, using the following
instructions; but this has not been recently tested.

To configure Guile for cross building, for example for Cygwin:

./configure --host=i686-pc-cygwin --disable-shared

A C compiler for the build system is required. The default is
"PATH=/usr/bin:$PATH cc". If that doesn't suit it can be specified
with the CC_FOR_BUILD variable in the usual way, for instance

./configure --host=m68k-unknown-linux-gnu CC_FOR_BUILD=/my/local/gcc

Guile for the build system can be specified similarly with the
GUILE_FOR_BUILD variable, it defaults to just "guile".


Using Guile Without Installing It =========================================

The top directory of the Guile sources contains a script called
"pre-inst-guile" that can be used to run the Guile that has just been
built.


Installing SLIB ===========================================================

In order to use SLIB from Guile you basically only need to put the
`slib' directory _in_ one of the directories on Guile's load path.

The standard installation is:

1. Obtain slib from http://www-swiss.ai.mit.edu/~jaffer/SLIB.html

2. Put it in Guile's data directory, that is the directory printed when
you type

guile-config info pkgdatadir

at the shell prompt. This is normally `/usr/local/share/guile', so the
directory will normally have full path `/usr/local/share/guile/slib'.

3. Start guile as a user with write access to the data directory and type

(use-modules (ice-9 slib))

at the Guile prompt. This will generate the slibcat catalog next to
the slib directory.

SLIB's `require' is provided by the Guile module (ice-9 slib).

Example:

(use-modules (ice-9 slib))
(require 'primes)
(prime? 7)


Guile Documentation ==================================================

If you've never used Scheme before, then the Guile Tutorial
(guile-tut.info) is a good starting point. The Guile Reference Manual
(guile.info) is the primary documentation for Guile. The Goops object
system is documented separately (goops.info). A copy of the R5RS
Scheme specification is included too (r5rs.info).

Info format versions of this documentation are installed as part of
the normal build process. The texinfo sources are under the doc
directory, and other formats like Postscript, PDF, DVI or HTML can be
generated from them with Tex and Texinfo tools.

The doc directory also includes an example-smob subdirectory which has
the example code from the "Defining New Types (Smobs)" chapter of the
reference manual.

The Guile WWW page is at

http://www.gnu.org/software/guile/guile.html

It contains a link to the Guile FAQ.

About This Distribution ==============================================

Interesting files include:

- LICENSE, which contains the exact terms of the Guile license.
- COPYING, which contains the terms of the GNU General Public License.
- INSTALL, which contains general instructions for building/installing Guile.
- NEWS, which describes user-visible changes since the last release of Guile.

Files are usually installed according to the prefix specified to
configure, /usr/local by default. Building and installing gives you:

Executables, in ${prefix}/bin:

guile --- a stand-alone interpreter for Guile. With no arguments, this
is a simple interactive Scheme interpreter. It can also be used
as an interpreter for script files; see the NEWS file for details.
guile-config --- a Guile script which provides the information necessary
to link your programs against the Guile library.
guile-snarf --- a script to parse declarations in your C code for
Scheme-visible C functions, Scheme objects to be used by C code,
etc.

Libraries, in ${prefix}/lib. Depending on the platform and options
given to configure, you may get shared libraries in addition
to or instead of these static libraries:

libguile.a --- an object library containing the Guile interpreter,
You can use Guile in your own programs by linking against this.
libguilereadline.a --- an object library containing glue code for the
GNU readline library.

libguile-srfi-*.a --- various SRFI support libraries

Header files, in ${prefix}/include:

libguile.h, guile/gh.h, libguile/*.h --- for libguile.
guile-readline/readline.h --- for guile-readline.

Support files, in ${prefix}/share/guile/:

ice-9/* --- run-time support for Guile: the module system,
read-eval-print loop, some R4RS code and other infrastructure.
oop/* --- the Guile Object-Oriented Programming System (GOOPS)
scripts/* --- executable modules, i.e., scheme programs that can be both
called as an executable from the shell, and loaded and used as a
module from scheme code. See scripts/README for more info.
srfi/* --- SRFI support modules. See srfi/README for more info.

Automake macros, in ${prefix}/share/aclocal:

guile.m4

Documentation in Info format, in ${prefix}/info:

guile --- Guile reference manual.

guile-tut --- Guile tutorial.

GOOPS --- GOOPS reference manual.

r5rs --- Revised(5) Report on the Algorithmic Language Scheme.


The Guile source tree is laid out as follows:

libguile:
The Guile Scheme interpreter --- both the object library
for you to link with your programs, and the executable you can run.
ice-9: Guile's module system, initialization code, and other infrastructure.
guile-config:
Source for the guile-config script.
guile-readline:
The glue code for using GNU readline with Guile. This
will be build when configure can find a recent enough readline
library on your system.
doc: Documentation (see above).

Git Repository Access ================================================

Guile's source code is stored in a Git repository at Savannah. Anyone
can access it using `git-clone' from one of the following URLs:

git://git.sv.gnu.org/guile.git
http://git.sv.gnu.org/r/guile.git

Developers with a Savannah SSH account can also access it from:

ssh://git.sv.gnu.org/srv/git/guile.git

The repository can also be browsed on-line at the following address:

http://git.sv.gnu.org/gitweb/?p=guile.git

For more information on Git, please see:

http://git.or.cz/

Please send problem reports to .