123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261 |
- /* $OpenBSD: if_re_cardbus.c,v 1.27 2015/03/14 03:38:47 jsg Exp $ */
- /*
- * Copyright (c) 2005 Peter Valchev <pvalchev@openbsd.org>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
- /*
- * Cardbus front-end for the Realtek 8169
- */
- #include <sys/param.h>
- #include <sys/endian.h>
- #include <sys/systm.h>
- #include <sys/sockio.h>
- #include <sys/mbuf.h>
- #include <sys/malloc.h>
- #include <sys/kernel.h>
- #include <sys/device.h>
- #include <sys/timeout.h>
- #include <sys/socket.h>
- #include <net/if.h>
- #include <net/if_dl.h>
- #include <net/if_media.h>
- #include <netinet/in.h>
- #include <netinet/if_ether.h>
- #include <dev/mii/miivar.h>
- #include <dev/pci/pcidevs.h>
- #include <dev/cardbus/cardbusvar.h>
- #include <dev/ic/rtl81x9reg.h>
- #include <dev/ic/revar.h>
- struct re_cardbus_softc {
- /* General */
- struct rl_softc sc_rl;
- /* Cardbus-specific data */
- void *sc_ih;
- cardbus_devfunc_t ct;
- pcitag_t sc_tag;
- pci_chipset_tag_t sc_pc;
- int sc_csr;
- int sc_cben;
- int sc_bar_reg;
- pcireg_t sc_bar_val;
- int sc_intrline;
- bus_size_t sc_mapsize;
- };
- int re_cardbus_probe(struct device *, void *, void *);
- void re_cardbus_attach(struct device *, struct device *, void *);
- int re_cardbus_detach(struct device *, int);
- void re_cardbus_setup(struct rl_softc *);
- /*
- * Cardbus autoconfig definitions
- */
- struct cfattach re_cardbus_ca = {
- sizeof(struct re_cardbus_softc),
- re_cardbus_probe,
- re_cardbus_attach,
- re_cardbus_detach
- };
- const struct pci_matchid re_cardbus_devices[] = {
- { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8169 },
- };
- /*
- * Probe for a Realtek 8169/8110 chip. Check the PCI vendor and device
- * IDs against our list and return a device name if we find a match.
- */
- int
- re_cardbus_probe(struct device *parent, void *match, void *aux)
- {
- return (cardbus_matchbyid((struct cardbus_attach_args *)aux,
- re_cardbus_devices, nitems(re_cardbus_devices)));
- }
- /*
- * Attach the interface. Allocate softc structures, do ifmedia
- * setup and ethernet/BPF attach.
- */
- void
- re_cardbus_attach(struct device *parent, struct device *self, void *aux)
- {
- struct re_cardbus_softc *csc = (struct re_cardbus_softc *)self;
- struct rl_softc *sc = &csc->sc_rl;
- struct cardbus_attach_args *ca = aux;
- struct cardbus_softc *psc =
- (struct cardbus_softc *)sc->sc_dev.dv_parent;
- cardbus_chipset_tag_t cc = psc->sc_cc;
- cardbus_function_tag_t cf = psc->sc_cf;
- cardbus_devfunc_t ct = ca->ca_ct;
- bus_addr_t adr;
- char intrstr[16];
- sc->sc_dmat = ca->ca_dmat;
- csc->ct = ct;
- csc->sc_tag = ca->ca_tag;
- csc->sc_pc = ca->ca_pc;
- csc->sc_intrline = ca->ca_intrline;
- /*
- * Map control/status registers.
- */
- if (Cardbus_mapreg_map(ct, RL_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
- &sc->rl_btag, &sc->rl_bhandle, &adr, &csc->sc_mapsize) == 0) {
- csc->sc_cben = CARDBUS_MEM_ENABLE;
- csc->sc_csr |= PCI_COMMAND_MEM_ENABLE;
- csc->sc_bar_reg = RL_PCI_LOMEM;
- csc->sc_bar_val = adr | PCI_MAPREG_TYPE_MEM;
- } else {
- printf(": can't map mem space\n");
- return;
- }
- /* Enable power */
- Cardbus_function_enable(ct);
- /* Get chip out of powersave mode (if applicable), initialize
- * config registers */
- re_cardbus_setup(sc);
- /* Allocate interrupt */
- csc->sc_ih = cardbus_intr_establish(cc, cf, csc->sc_intrline,
- IPL_NET, re_intr, sc, sc->sc_dev.dv_xname);
- if (csc->sc_ih == NULL) {
- printf(": couldn't establish interrupt at %d",
- ca->ca_intrline);
- Cardbus_function_disable(csc->ct);
- return;
- }
- snprintf(intrstr, sizeof(intrstr), "irq %d", ca->ca_intrline);
- sc->sc_product = PCI_PRODUCT(ca->ca_id);
- /* Call bus-independent (common) attach routine */
- if (re_attach(sc, intrstr)) {
- cardbus_intr_disestablish(ct->ct_cc, ct->ct_cf, csc->sc_ih);
- Cardbus_mapreg_unmap(ct, csc->sc_bar_reg, sc->rl_btag,
- sc->rl_bhandle, csc->sc_mapsize);
- }
- }
- /*
- * Get chip out of power-saving mode, init registers
- */
- void
- re_cardbus_setup(struct rl_softc *sc)
- {
- struct re_cardbus_softc *csc = (struct re_cardbus_softc *)sc;
- cardbus_devfunc_t ct = csc->ct;
- cardbus_chipset_tag_t cc = ct->ct_cc;
- pci_chipset_tag_t pc = csc->sc_pc;
- pcireg_t reg, command;
- int pmreg;
- /* Handle power management nonsense */
- if (pci_get_capability(pc, csc->sc_tag,
- PCI_CAP_PWRMGMT, &pmreg, 0)) {
- command = pci_conf_read(pc, csc->sc_tag,
- pmreg + PCI_PMCSR);
- if (command & RL_PSTATE_MASK) {
- pcireg_t iobase, membase, irq;
- /* Save important PCI config data */
- iobase = pci_conf_read(pc, csc->sc_tag, RL_PCI_LOIO);
- membase = pci_conf_read(pc, csc->sc_tag, RL_PCI_LOMEM);
- irq = pci_conf_read(pc, csc->sc_tag, RL_PCI_INTLINE);
- /* Reset the power state */
- printf("%s: chip is in D%d power mode "
- "-- setting to D0\n", sc->sc_dev.dv_xname,
- command & RL_PSTATE_MASK);
- command &= RL_PSTATE_MASK;
- pci_conf_write(pc, csc->sc_tag, pmreg + PCI_PMCSR,
- command);
- /* Restore PCI config data */
- pci_conf_write(pc, csc->sc_tag, RL_PCI_LOIO, iobase);
- pci_conf_write(pc, csc->sc_tag, RL_PCI_LOMEM, membase);
- pci_conf_write(pc, csc->sc_tag, RL_PCI_INTLINE, irq);
- }
- }
- /* Make sure the right access type is on the Cardbus bridge */
- (*ct->ct_cf->cardbus_ctrl)(cc, csc->sc_cben);
- (*ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
- /* Program the BAR */
- pci_conf_write(pc, csc->sc_tag, csc->sc_bar_reg, csc->sc_bar_val);
- /* Enable proper bits in CARDBUS CSR */
- reg = pci_conf_read(pc, csc->sc_tag, PCI_COMMAND_STATUS_REG);
- reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE);
- reg |= csc->sc_csr;
- pci_conf_write(pc, csc->sc_tag, PCI_COMMAND_STATUS_REG, reg);
- /* Make sure the latency timer is set to some reasonable value */
- reg = pci_conf_read(pc, csc->sc_tag, PCI_BHLC_REG);
- if (PCI_LATTIMER(reg) < 0x20) {
- reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT);
- reg |= (0x20 << PCI_LATTIMER_SHIFT);
- pci_conf_write(pc, csc->sc_tag, PCI_BHLC_REG, reg);
- }
- }
- /*
- * Cardbus detach function: deallocate all resources
- */
- int
- re_cardbus_detach(struct device *self, int flags)
- {
- struct re_cardbus_softc *csc = (void *)self;
- struct rl_softc *sc = &csc->sc_rl;
- struct cardbus_devfunc *ct = csc->ct;
- struct ifnet *ifp = &sc->sc_arpcom.ac_if;
- /* Remove timeout handler */
- timeout_del(&sc->timer_handle);
- /* Detach PHY */
- if (LIST_FIRST(&sc->sc_mii.mii_phys) != NULL)
- mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY);
- /* Delete media stuff */
- ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY);
- ether_ifdetach(ifp);
- if_detach(ifp);
- /* Disable interrupts */
- if (csc->sc_ih != NULL)
- cardbus_intr_disestablish(ct->ct_cc, ct->ct_cf, csc->sc_ih);
- /* Free cardbus resources */
- Cardbus_mapreg_unmap(ct, csc->sc_bar_reg, sc->rl_btag, sc->rl_bhandle,
- csc->sc_mapsize);
- return (0);
- }
|