sas_internal.h 5.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165
  1. /*
  2. * Serial Attached SCSI (SAS) class internal header file
  3. *
  4. * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
  5. * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
  6. *
  7. * This file is licensed under GPLv2.
  8. *
  9. * This program is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License as
  11. * published by the Free Software Foundation; either version 2 of the
  12. * License, or (at your option) any later version.
  13. *
  14. * This program is distributed in the hope that it will be useful, but
  15. * WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  17. * General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  22. * USA
  23. *
  24. */
  25. #ifndef _SAS_INTERNAL_H_
  26. #define _SAS_INTERNAL_H_
  27. #include <scsi/scsi.h>
  28. #include <scsi/scsi_host.h>
  29. #include <scsi/scsi_transport_sas.h>
  30. #include <scsi/libsas.h>
  31. #define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
  32. #define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG "sas: " fmt, ## __VA_ARGS__)
  33. #define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
  34. #define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
  35. void sas_scsi_recover_host(struct Scsi_Host *shost);
  36. int sas_show_class(enum sas_class class, char *buf);
  37. int sas_show_proto(enum sas_protocol proto, char *buf);
  38. int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
  39. int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
  40. int sas_register_phys(struct sas_ha_struct *sas_ha);
  41. void sas_unregister_phys(struct sas_ha_struct *sas_ha);
  42. int sas_register_ports(struct sas_ha_struct *sas_ha);
  43. void sas_unregister_ports(struct sas_ha_struct *sas_ha);
  44. enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
  45. int sas_init_queue(struct sas_ha_struct *sas_ha);
  46. int sas_init_events(struct sas_ha_struct *sas_ha);
  47. void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
  48. void sas_deform_port(struct asd_sas_phy *phy, int gone);
  49. void sas_porte_bytes_dmaed(struct work_struct *work);
  50. void sas_porte_broadcast_rcvd(struct work_struct *work);
  51. void sas_porte_link_reset_err(struct work_struct *work);
  52. void sas_porte_timer_event(struct work_struct *work);
  53. void sas_porte_hard_reset(struct work_struct *work);
  54. int sas_notify_lldd_dev_found(struct domain_device *);
  55. void sas_notify_lldd_dev_gone(struct domain_device *);
  56. int sas_smp_phy_control(struct domain_device *dev, int phy_id,
  57. enum phy_func phy_func, struct sas_phy_linkrates *);
  58. int sas_smp_get_phy_events(struct sas_phy *phy);
  59. struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
  60. void sas_hae_reset(struct work_struct *work);
  61. #ifdef CONFIG_SCSI_SAS_HOST_SMP
  62. extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
  63. struct request *rsp);
  64. #else
  65. static inline int sas_smp_host_handler(struct Scsi_Host *shost,
  66. struct request *req,
  67. struct request *rsp)
  68. {
  69. shost_printk(KERN_ERR, shost,
  70. "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
  71. return -EINVAL;
  72. }
  73. #endif
  74. static inline void sas_queue_event(int event, spinlock_t *lock,
  75. unsigned long *pending,
  76. struct work_struct *work,
  77. struct sas_ha_struct *sas_ha)
  78. {
  79. unsigned long flags;
  80. spin_lock_irqsave(lock, flags);
  81. if (test_bit(event, pending)) {
  82. spin_unlock_irqrestore(lock, flags);
  83. return;
  84. }
  85. __set_bit(event, pending);
  86. spin_unlock_irqrestore(lock, flags);
  87. spin_lock_irqsave(&sas_ha->state_lock, flags);
  88. if (sas_ha->state != SAS_HA_UNREGISTERED) {
  89. scsi_queue_work(sas_ha->core.shost, work);
  90. }
  91. spin_unlock_irqrestore(&sas_ha->state_lock, flags);
  92. }
  93. static inline void sas_begin_event(int event, spinlock_t *lock,
  94. unsigned long *pending)
  95. {
  96. unsigned long flags;
  97. spin_lock_irqsave(lock, flags);
  98. __clear_bit(event, pending);
  99. spin_unlock_irqrestore(lock, flags);
  100. }
  101. static inline void sas_fill_in_rphy(struct domain_device *dev,
  102. struct sas_rphy *rphy)
  103. {
  104. rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
  105. rphy->identify.initiator_port_protocols = dev->iproto;
  106. rphy->identify.target_port_protocols = dev->tproto;
  107. switch (dev->dev_type) {
  108. case SATA_DEV:
  109. /* FIXME: need sata device type */
  110. case SAS_END_DEV:
  111. rphy->identify.device_type = SAS_END_DEVICE;
  112. break;
  113. case EDGE_DEV:
  114. rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
  115. break;
  116. case FANOUT_DEV:
  117. rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
  118. break;
  119. default:
  120. rphy->identify.device_type = SAS_PHY_UNUSED;
  121. break;
  122. }
  123. }
  124. static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
  125. {
  126. struct expander_device *ex = &dev->ex_dev;
  127. struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
  128. if (!ex->parent_port) {
  129. ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
  130. /* FIXME: error handling */
  131. BUG_ON(!ex->parent_port);
  132. BUG_ON(sas_port_add(ex->parent_port));
  133. sas_port_mark_backlink(ex->parent_port);
  134. }
  135. sas_port_add_phy(ex->parent_port, ex_phy->phy);
  136. }
  137. #endif /* _SAS_INTERNAL_H_ */