| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384 |
- # arch/arm/plat-s3c64xx/Makefile
- #
- # Copyright 2009 Simtec Electronics
- #
- # Licensed under GPLv2
- obj-y :=
- obj-m :=
- obj-n := dummy.o
- obj- :=
- # Objects we always build independent of SoC choice
- obj-y += init.o
- obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
- obj-y += clock.o
- obj-y += pwm-clock.o
- obj-y += gpio.o
- obj-y += gpio-config.o
- obj-y += dev-asocdma.o
- obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
- obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
- obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
- # ADC
- obj-$(CONFIG_S3C_ADC) += adc.o
- # devices
- obj-y += platformdata.o
- obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
- obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
- obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
- obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o
- obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
- obj-y += dev-i2c0.o
- obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
- obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
- obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o
- obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o
- obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o
- obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o
- obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o
- obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
- obj-y += dev-uart.o
- obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
- obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
- obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o
- obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
- obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o
- obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
- obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
- obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o
- obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
- obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o
- obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o
- # DMA support
- obj-$(CONFIG_S3C_DMA) += dma.o
- obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o
- # PM support
- obj-$(CONFIG_PM) += pm.o
- obj-$(CONFIG_PM) += pm-gpio.o
- obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
- obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
- # PD support
- obj-$(CONFIG_SAMSUNG_PD) += pd.o
- # PWM support
- obj-$(CONFIG_HAVE_PWM) += pwm.o
|
