head31.S 3.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114
  1. /*
  2. * arch/s390/kernel/head31.S
  3. *
  4. * Copyright (C) IBM Corp. 2005,2010
  5. *
  6. * Author(s): Hartmut Penner <hp@de.ibm.com>
  7. * Martin Schwidefsky <schwidefsky@de.ibm.com>
  8. * Rob van der Heij <rvdhei@iae.nl>
  9. * Heiko Carstens <heiko.carstens@de.ibm.com>
  10. *
  11. */
  12. #include <linux/init.h>
  13. #include <asm/asm-offsets.h>
  14. #include <asm/thread_info.h>
  15. #include <asm/page.h>
  16. __HEAD
  17. .globl startup_continue
  18. startup_continue:
  19. basr %r13,0 # get base
  20. .LPG1:
  21. l %r1,.Lbase_cc-.LPG1(%r13)
  22. mvc 0(8,%r1),__LC_LAST_UPDATE_CLOCK
  23. lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
  24. l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
  25. # move IPL device to lowcore
  26. #
  27. # Setup stack
  28. #
  29. l %r15,.Linittu-.LPG1(%r13)
  30. st %r15,__LC_THREAD_INFO # cache thread info in lowcore
  31. mvc __LC_CURRENT(4),__TI_task(%r15)
  32. ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
  33. st %r15,__LC_KERNEL_STACK # set end of kernel stack
  34. ahi %r15,-96
  35. #
  36. # Save ipl parameters, clear bss memory, initialize storage key for kernel pages,
  37. # and create a kernel NSS if the SAVESYS= parm is defined
  38. #
  39. l %r14,.Lstartup_init-.LPG1(%r13)
  40. basr %r14,%r14
  41. lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space,
  42. # virtual and never return ...
  43. .align 8
  44. .Lentry:.long 0x00080000,0x80000000 + _stext
  45. .Lctl: .long 0x04b50002 # cr0: various things
  46. .long 0 # cr1: primary space segment table
  47. .long .Lduct # cr2: dispatchable unit control table
  48. .long 0 # cr3: instruction authorization
  49. .long 0 # cr4: instruction authorization
  50. .long .Lduct # cr5: primary-aste origin
  51. .long 0 # cr6: I/O interrupts
  52. .long 0 # cr7: secondary space segment table
  53. .long 0 # cr8: access registers translation
  54. .long 0 # cr9: tracing off
  55. .long 0 # cr10: tracing off
  56. .long 0 # cr11: tracing off
  57. .long 0 # cr12: tracing off
  58. .long 0 # cr13: home space segment table
  59. .long 0xc0000000 # cr14: machine check handling off
  60. .long 0 # cr15: linkage stack operations
  61. .Lmchunk:.long memory_chunk
  62. .Lbss_bgn: .long __bss_start
  63. .Lbss_end: .long _end
  64. .Lparmaddr: .long PARMAREA
  65. .Linittu: .long init_thread_union
  66. .Lstartup_init:
  67. .long startup_init
  68. .align 64
  69. .Lduct: .long 0,0,0,0,.Lduald,0,0,0
  70. .long 0,0,0,0,0,0,0,0
  71. .align 128
  72. .Lduald:.rept 8
  73. .long 0x80000000,0,0,0 # invalid access-list entries
  74. .endr
  75. .Lbase_cc:
  76. .long sched_clock_base_cc
  77. .globl _ehead
  78. _ehead:
  79. #ifdef CONFIG_SHARED_KERNEL
  80. .org 0x100000 - 0x11000 # head.o ends at 0x11000
  81. #endif
  82. #
  83. # startup-code, running in absolute addressing mode
  84. #
  85. .globl _stext
  86. _stext: basr %r13,0 # get base
  87. .LPG3:
  88. # check control registers
  89. stctl %c0,%c15,0(%r15)
  90. oi 2(%r15),0x40 # enable sigp emergency signal
  91. oi 0(%r15),0x10 # switch on low address protection
  92. lctl %c0,%c15,0(%r15)
  93. #
  94. lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
  95. l %r14,.Lstart-.LPG3(%r13)
  96. basr %r14,%r14 # call start_kernel
  97. #
  98. # We returned from start_kernel ?!? PANIK
  99. #
  100. basr %r13,0
  101. lpsw .Ldw-.(%r13) # load disabled wait psw
  102. #
  103. .align 8
  104. .Ldw: .long 0x000a0000,0x00000000
  105. .Lstart:.long start_kernel
  106. .Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0