woof-CE-libre/woof-code/packages-templates/xorg_base/usr/share/X11/Options

!!
!! Copyright (c) 2001 by The XFree86 Project, Inc.
!!
!! Permission is hereby granted, free of charge, to any person obtaining a
!! copy of this software and associated documentation files (the "Software"),
!! to deal in the Software without restriction, including without limitation
!! the rights to use, copy, modify, merge, publish, distribute, sublicense,
!! and/or sell copies of the Software, and to permit persons to whom the
!! Software is furnished to do so, subject to the following conditions:
!!
!! The above copyright notice and this permission notice shall be included in
!! all copies or substantial portions of the Software.
!!
!! THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
!! IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
!! FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
!! THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
!! WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
!! OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
!! SOFTWARE.
!!
!! Except as contained in this notice, the name of the XFree86 Project shall
!! not be used in advertising or otherwise to promote the sale, use or other
!! dealings in this Software without prior written authorization from the
!! XFree86 Project.
!!
!! $XFree86: xc/programs/Xserver/hw/xfree86/Options,v 1.10 2003/02/15 06:46:30 paulo Exp $

!! XAA options
xaa.XaaNoCPUToScreenColorExpandFill:\
Disables accelerated rectangular expansion blits from source patterns \
stored in system memory (using a memory-mapped aperture).

xaa.XaaNoColor8x8PatternFillRect:\
Disables accelerated fills of a rectangular region with a full-color pattern.

xaa.XaaNoColor8x8PatternFillTrap:\
Disables accelerated fills of a trapezoidal region with a full-color pattern.

xaa.XaaNoDashedBresenhamLine:\
Disables accelerated dashed Bresenham line draws.

xaa.XaaNoDashedTwoPointLine:\
Disables accelerated dashed line draws between two arbitrary points.

xaa.XaaNoImageWriteRect:\
Disables acclerated transfers of full-color rectangular patterns from  \
system memory to video memory (using a memory-mapped aperture).

xaa.XaaNoMono8x8PatternFillRect:\
Disables accelerated fills of a rectangular region with a monochrome pattern.

xaa.XaaNoMono8x8PatternFillTrap:\
Disables accelerated fills of a trapezoidal region with a monochrome pattern.

xaa.XaaNoOffscreenPixmaps:\
Disables accelerated draws into pixmaps stored in offscreen video memory.

xaa.XaaNoPixmapCache:\
Disables caching of patterns in offscreen video memory.

xaa.XaaNoScanlineCPUToScreenColorExpandFill:\
Disables accelerated rectangular expansion blits from source patterns \
stored in system memory (one scan line at a time).

xaa.XaaNoScanlineImageWriteRect:\
Disables accelerated transfers of full-color rectangular patterns from \
system memory to video memory (one scan line at a time).

xaa.XaaNoScreenToScreenColorExpandFill:\
Disables accelerated rectangular expansion blits from source patterns \
stored in off-screen video memory.

xaa.XaaNoScreenToScreenCopy:\
Disables accelerated copies of rectangular regions from one part of video \
memory to another part of video memory.

xaa.XaaNoSolidBresenhamLine:\
Disables accelerated solid Bresenham line draws.

xaa.XaaNoSolidFillRect:\
Disables accelerated solid-color fills of rectangles.

xaa.XaaNoSolidFillTrap:\
Disables accelerated solid-color fills of Bresenham trapezoids.

xaa.XaaNoSolidHorVertLine:\
Disables accelerated solid horizontal and vertical line draws.

xaa.XaaNoSolidTwoPointLine:\
Disables accelerated solid line draws between two arbitrary points.


!! DDC Options
ddc.NoDDC:\
Disables DDC (Display Data Channel) so that the Xserver doesn't try to talk to\
the Monitor. \
Default: off, implies DDC is used.

ddc.NoDDC1:\
Disables use of DDC version 1 (DDC using vertical refresh). \
Default: off, implies DDC1 is used.

ddc.NoDDC2:\
Disables use of DDC version 2 (DDC using I2C - usually over vga connector). \
Default: off, implies DDC2 is used.


!! FBDev options
fbdev.fbdev:\
The framebuffer device to use. \
Default: /dev/fb0.

fbdev.ShadowFB:\
Enable or disable use of the shadow framebuffer layer. \
Default: on.

fbdev.Rotate:\
Enable rotation of the display. The supported values are "CW" (clockwise, \
90 degrees), "UD" (upside down, 180 degrees) and "CCW" (counter clockwise, \
270 degrees). Implies use of the shadow framebuffer layer. \
Default: off.


!! MGA options
mga.ColorKey:\
Set the colormap index used for the transparency key for the depth 8 plane \
when operating in 8+24 overlay mode. The value must be in the range 2-255. \
Default: 255.

!mga.HWcursor:\
!Enable or disable the HW cursor. Default: on.

mga.MGASDRAM:\
Specify whether G100, G200 or G400 cards have SDRAM. The driver attempts to \
auto-detect this based on the card's PCI subsystem ID. This option may be \
used to override that auto-detection. The mga driver is not able to \
auto-detect the presence of of SDRAM on secondary heads in multihead \
configurations so this option will often need to be specified in multihead \
configurations. Default: auto-detected.

mga.NoAccel:\
Disable or enable 2D hardware acceleration. Default: acceleration is enabled.

mga.OverclockMem:\
Set clocks to values used by some commercial X-Servers (G100, G200 and \
G400 only). Default: off.

mga.Overlay:\
Enable 8+24 overlay mode. Only appropriate for depth 24. (Note: the G100 is \
unaccelerated in the 8+24 overlay mode due to a missing hardware feature). \
Default: off.

mga.PciRetry:\
Enable or disable PCI retries. Default: off.

mga.Rotate:\
Rotate the display clockwise or counterclockwise. This mode is unaccelerated. \
Default: no rotation.

mga.ShadowFB:\
Enable or disable use of the shadow framebuffer layer. Default: off. \

mga.SyncOnGreen:\
Enable or disable combining the sync signals with the green signal. \
Default: off.

mga.UseFBDev:\
Enable or disable use of on OS-specific fb interface (and is not supported \
on all OSs). See fbdevhw(4) for further information. Default: off.

mga.VideoKey:\
This sets the default pixel value for the YUV video overlay key. \
Default: undefined.

mga.TexturedVideo:\
This has XvImage support use the texture engine rather than the video \
overlay. This option is only supported by the G200 and G400, and only in \
16 and 32 bits per pixel. Default: off.

mga.NoHal:\
Matrox provides a "Hardware Abstraction Layer", \
a separate binary which enables extra hardware features from G400 onwards. \
Default: HAL is used.

!mga.DigitalScreen:\
! Option Ignored. Drivers auto-detect Digital output if they support it at all.
!Default: Auto-detected.

! mga.TV:\
! Option Ignored. Drivers auto-detect TV if they support TV out at all.
!Default: Auto-detected.

mga.TVStandard:\
(HAL only) Picture standard for TV out. Use "PAL" for 50Hz PAL. \
Default: 60Hz NTSC.

mga.CableType:\
(HAL only) Set the cable type for TV out. Options are "SCART_RGB", \
"SCART_COMPOSITE", or "SCART_TYPE2". Any other string enables the default. \
Default: YC_COMPOSITE.

mga.SwappedHead:\
(HAL only) For Dual Head cards, reverse relationship between CRTC picture \
generators and video output sockets. \
Especially useful with TV or digital outputs. \
Default: CRTC1 generates output for socket 1 and CRTC2 generates output for socket 2.

mga.Crtc2Half:\
In dual head mode, allow CRTC2 to use half of the video memory. \
Default: CRTC2 uses min{8MB, half video RAM}, but see also Crtc2Ram.

mga.Crtc2Ram:\
In dual head mode, CRTC2 will use this many KB of video memory. \
Overrrides Crtc2Half. \
Default: CRTC2 uses min{8MB, half video RAM}, but see also Crtc2Half.

mga.ShowCache:\
An option for hackers. The pixmap cache lives in off-screen video memory. \
This option extends the virtual desktop to show this part of video memory. \
Default: Off.

mga.AGPMode:\
AGP bus speed multiplier, used by DRI. \
Default: x1 (slowest but most stable).


!! R128 options

!r128.SWcursor: \
!Selects software cursor. \
!Default: off.

r128.NoAccel:\
Enables or disables all hardware acceleration. \
Default: on.

r128.Dac6Bit:\
Enables or disables the use of 6 bits per color component when in 8 bpp \
mode (emulates VGA mode). \
Default: off.

r128.VideoKey:\
This overrides the default pixel value for the YUV video overlay key. \
Default: undefined.

r128.Display:\
Select display mode for devices which support flat panels. Supported\
modes are "FP", "CRT", "Mirror", "BIOS". \
Default: "FP".

r128.ProgramFPRegs:\
Enable or disable programming of the flat panel registers.\
Beware that this may damage your panel, so use at your own risk. \
Default: device dependant.

r128.PanelWidth:\
Override flat panel width in pixels. \
Default: determined using BIOS.

r128.PanelHeight:\
Override flat panel height in pixels. \
Default: determined using BIOS.

r128.UseFBDev:\
Enable or disable use of on OS-specific fb interface (and is not supported \
on all OSs). See fbdevhw(4) for further information. Default: off.

r128.DMAForXv:\
Try or don't try to use DMA for Xv image transfers. This will reduce CPU \
usage when playing big videos like DVDs, but may cause instabilities. \
Default: off.


!! Radeon options

radeon.SWcursor:\
Selects software cursor. Default: off.

radeon.NoAccel:\
Disables all hardware acceleration. Default: off.

radeon.Dac6Bit:\
Enables or disables the use of 6 bits per color component when in 8 bpp \
mode (emulates VGA mode). Default: off.

radeon.VideoKey:\
This overrides the default pixel value for the YUV video overlay key. \
Default: undefined.

radeon.UseFBDev:\
Enable or disable use of an OS-specific framebuffer device interface \
(which is not supported on all OSs). Default: off.

radeon.AGPMode:\
Set AGP data transfer rate. (used only when DRI is enabled) \
Valid choices: 1 (default), 2 and 4

radeon.AGPFastWrite:\
Enable AGP fast write. (used only when DRI is enabled) \
Default: off.

radeon.ForcePCIMode:\
Force to use PCI GART for DRI acceleration. (used only when DRI is enabled) \
Default: off.

radeon.DDCMode:\
Force to use the modes queried from the connected monitor. Default: off.

radeon.CloneDisplay:\
This option is only used for dual-head cards with only single screen section \
specified in the configuration file. Valid choices: \
0 - disable (one CRTC used for both heads) \
1 - auto-detect (default) \
2 - force on \
3 - auto-detect + 2nd head overlay \
4 - force on + 2nd head overlay \

radeon.CloneMode:\
Set the first mode for the secondary head. It can be different from the modes \
used for the primary head. If you don't have this line while clone is on, the \
modes specified for the primary head will be used for the secondary head.

radeon.CloneHSync:\
Set the horizontal sync range for the secondary monitor. It is not required if \
a DDC capable monitor is connected. Default: undefined.

radeon.CloneVRefresh:\
Set the vertical refresh range for the secondary monitor. It is not required \
if a DDC capable monitor is connected. Default: undefined.

radeon.PanelOff:\
Disable panel output. Only used when clone is enabled. Default: off.

radeon.EnablePageFlip:\
Enable page flipping for 3D acceleration. This will increase performance but \
not work correctly in some rare cases. Default: off.


!! NeoMagic options

neo.StrangeLockups:\
Before XFree86 version 4.2.0 many NeoMagic systems experienced \
strange lockups unless they used the options \ 
"XaaNoScanlineImageWriteRect" and "XaaNoScanlineCPUToScreenColorExpandFill". \
Setting this to "No" is faster but will lock some machines. \
Default: Yes.

!! Vesa options
vesa.ShadowFB:\
Enable or disable use of the shadow framebuffer layer. See shadowfb(4)\
for further information. Default: on.


!! SiS Options
sis.NoAccel:\
Disable or enable acceleration. \
Default: acceleration is enabled.

!sis.HWcursor:\
!Enable or disable the HW cursor. \
!Default: on.

!sis.SWcursor:\
!The opposite of HWCursor. \
!Default: on.

sis.NoXVideo:\
Disable XV (XVideo) extension support. \
Default: off.

sis.SetMClk:\
Set the memory clock in MHz. \
Default: autodetect.

sis.PciRetry:\
Enable or disable PCI retries. \
Default: on.

sis.TurboQueue:\
Enable or disable TurboQueue mode. \
Default: off for SIS530, on for the others.

sis.FastVram:\
Enable or disable FastVram mode. \
Default: on.

sis.Rotate:\
Rotate the display clockwise (CW) or counterclockwise (CCW). \
This mode is unaccelerated, and uses the Shadow Frame Buffer layer \
Default: no rotation.

sis.ForceCRT2Type:\
Force display type to one of: TV, LCD or VGA. \
Default: autodetect.

sis.ShadowFB:\
Enable or disable use of the shadow framebuffer layer. See shadowfb(4) for \
further information. Default: off.
 
!! Generic driver options, apply to many drivers

*.SWcursor:\
See also HWcursor.\
Default: Usually Off.

*.HWcursor:\
Use the hardware cursor. See also SWcursor. \
Default: usually HWcursor, but some drivers may default to software.