| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141 |
- ;
- ; Configuration for Shared Line Appearances (SLA).
- ;
- ; See doc/asterisk.pdf for more information.
- ;
- ; ---- General Options ----------------
- [general]
- ;attemptcallerid=no ; Attempt CallerID handling. The default value for this
- ; is "no" because CallerID handling with an SLA setup is
- ; known to not work properly in some situations. However,
- ; feel free to enable it if you would like. If you do, and
- ; you find problems, please do not report them.
- ; -------------------------------------
- ; ---- Trunk Declarations -------------
- ;
- ;[line1] ; Provide a name for this trunk.
- ;type=trunk ; This line is what marks this entry as a trunk.
- ;device=DAHDI/3 ; Map this trunk declaration to a specific device.
- ; NOTE: You can not just put any type of channel here.
- ; DAHDI channels can be directly used. IP trunks
- ; require some indirect configuration which is
- ; described in doc/asterisk.pdf.
- ;autocontext=line1 ; This supports automatic generation of the dialplan entries
- ; if the autocontext option is used. Each trunk should have
- ; a unique context name. Then, in chan_dahdi.conf, this device
- ; should be configured to have incoming calls go to this context.
- ;ringtimeout=30 ; Set how long to allow this trunk to ring on an inbound call before hanging
- ; it up as an unanswered call. The value is in seconds.
- ;barge=no ; If this option is set to "no", then no station will be
- ; allowed to join a call that is in progress. The default
- ; value is "yes".
- ;hold=private ; This option configure hold permissions for this trunk.
- ; "open" - This means that any station can put this trunk
- ; on hold, and any station can retrieve it from
- ; hold. This is the default.
- ; "private" - This means that once a station puts the
- ; trunk on hold, no other station will be
- ; allowed to retrieve the call from hold.
- ;[line2]
- ;type=trunk
- ;device=DAHDI/4
- ;autocontext=line2
- ;[line3]
- ;type=trunk
- ;device=DAHDI/3
- ;autocontext=line3
- ;[line4]
- ;type=trunk
- ;device=Local/disa@line4_outbound ; A Local channel in combination with the Disa
- ; application can be used to support IP trunks.
- ; See doc/asterisk.pdf on more information on how
- ; IP trunks work.
- ;autocontext=line4
- ; --------------------------------------
- ; ---- Station Declarations ------------
- ;[station1] ; Define a name for this station.
- ;type=station ; This line indicates that this entry is a station.
- ;device=SIP/station1 ; Each station must be mapped to a device.
- ;autocontext=sla_stations ; This supports automatic generation of the dialplan entries if
- ; the autocontext option is used. All stations can use the same
- ; context without conflict. The device for this station should
- ; have its context configured to the same one listed here.
- ;ringtimeout=10 ; Set a timeout for how long to allow the station to ring for an
- ; incoming call, in seconds.
- ;ringdelay=10 ; Set a time for how long to wait before beginning to ring this station
- ; once there is an incoming call, in seconds.
- ;hold=private ; This option configure hold permissions for this station. Note
- ; that if private hold is set in the trunk entry, that will override
- ; anything here. However, if a trunk has open hold access, but this
- ; station is set to private hold, then the private hold will be in
- ; effect.
- ; "open" - This means that once this station puts a call
- ; on hold, any other station is allowed to retrieve
- ; it. This is the default.
- ; "private" - This means that once this station puts a
- ; call on hold, no other station will be
- ; allowed to retrieve the call from hold.
-
- ;trunk=line1 ; Individually list all of the trunks that will appear on this station. This
- ; order is significant. It should be the same order as they appear on the
- ; phone. The order here defines the order of preference that the trunks will
- ; be used.
- ;trunk=line2
- ;trunk=line3,ringdelay=5 ; A ring delay for the station can also be specified for a specific trunk.
- ; If a ring delay is specified both for the whole station and for a specific
- ; trunk on a station, the setting for the specific trunk will take priority.
- ; This value is in seconds.
- ;trunk=line4,ringtimeout=5 ; A ring timeout for the station can also be specified for a specific trunk.
- ; If a ring timeout is specified both for the whole station and for a specific
- ; trunk on a station, the setting for the specific trunk will take priority.
- ; This value is in seconds.
- ;[station](!) ; When there are a lot of stations that are configured the same way,
- ; it is convenient to use a configuration template like this so that
- ; the common settings stay in one place.
- ;type=station
- ;autocontext=sla_stations
- ;trunk=line1
- ;trunk=line2
- ;trunk=line3
- ;trunk=line4
- ;[station2](station) ; Define a station that uses the configuration from the template "station".
- ;device=SIP/station2
- ;
- ;[station3](station)
- ;device=SIP/station3
- ;
- ;[station4](station)
- ;device=SIP/station4
- ;
- ;[station5](station)
- ;device=SIP/station5
- ; --------------------------------------
|
