| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899 |
- # generated by Slic3r 0.9.7 on Wed Apr 9 21:19:19 2014
- acceleration = 0
- bed_size = 150,175
- bed_temperature = 60
- bottom_solid_layers = 3
- bridge_fan_speed = 100
- bridge_flow_ratio = 1
- bridge_speed = 60
- brim_width = 0
- complete_objects = 0
- cooling = 0
- disable_fan_first_layers = 1
- duplicate = 1
- duplicate_distance = 6
- duplicate_grid = 1,1
- end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors
- external_perimeter_speed = 100%
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extruder_offset = 0x0
- extrusion_axis = E
- extrusion_multiplier = 1
- extrusion_width = 0
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_diameter = 1.75
- fill_angle = 45
- fill_density = 0
- fill_pattern = honeycomb
- first_layer_bed_temperature = 60
- first_layer_extrusion_width = 200%
- first_layer_height = 100%
- first_layer_speed = 30%
- first_layer_temperature = 185
- g0 = 0
- gap_fill_speed = 20
- gcode_arcs = 0
- gcode_comments = 0
- gcode_flavor = reprap
- infill_acceleration = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0
- infill_speed = 60
- layer_gcode =
- layer_height = 0.3
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- min_skirt_length = 0
- notes =
- nozzle_diameter = 0.3
- only_retract_when_crossing_perimeters = 0
- output_filename_format = [input_filename_base].gcode
- perimeter_acceleration = 25
- perimeter_extruder = 1
- perimeter_extrusion_width = 0
- perimeter_speed = 30
- perimeters = 3
- post_process =
- print_center = 75,87.5
- randomize_start = 1
- retract_before_travel = 2
- retract_length = 1
- retract_length_toolchange = 3
- retract_lift = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 30
- rotate = 0
- scale = 1
- skirt_distance = 6
- skirt_height = 1
- skirts = 1
- slowdown_below_layer_time = 15
- small_perimeter_speed = 30
- solid_fill_pattern = rectilinear
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_speed = 60
- start_gcode = G28 ; home all axes
- support_material =
- support_material_angle = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 60
- support_material_threshold = 45
- temperature = 185
- threads = 2
- top_solid_infill_speed = 50
- top_solid_layers = 3
- travel_speed = 130
- use_relative_e_distances = 0
- vibration_limit = 0
- z_offset = 0
|
