gcode2photon

gcode2photon

Use Cura generated gcode in photon ;) examples:

• x=2.9cm y=4.5cm z=7.3cm full fill = 43g

• x=4.93cm y=7.6cm z=12.41cm = 51g with 5% infill, 70% more than the original and only 8g heavier.

• If the wall thickness is small, an internal mesh can be seen.

dependency

• python 2/3
• python-pil

install dependency

GNU/Linux:

sudo apt install python-pil

Step 1, setup new custom printer with X=68 Y=120 Z=150:

Step 2, setup layer Z=0.05, wall width=0.047:

Step 2.1 Slice, you will see something like this, example 1:

Step 3, run gcode2photon, with python

python ./gcode2images.py my_gcode_file.gcode

Step 3.1 if ok, you will see something like this:

Step 3.2 after done, all layers will be files saved to ./layers/layer_xxxxxx.png

Step 4, You will needed to use Photon File editor, create New File

Step 5, In menu select "Import bitmaps"

Step 6, Select the bitmaps directory

Step 7, Enjoy