ddca-ss2021/ca/miriv/quartus/pll_altera.vhd

-- megafunction wizard: %ALTPLL%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: altpll 

-- ============================================================
-- File Name: pll_altera.vhd
-- Megafunction Name(s):
--          altpll
--
-- Simulation Library Files(s):
--          altera_mf
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
--
-- 10.1 Build 197 01/19/2011 SP 1 SJ Full Version
-- ************************************************************


--Copyright (C) 1991-2011 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions 
--and other software and tools, and its AMPP partner logic 
--functions, and any output files from any of the foregoing 
--(including device programming or simulation files), and any 
--associated documentation or information are expressly subject 
--to the terms and conditions of the Altera Program License 
--Subscription Agreement, Altera MegaCore Function License 
--Agreement, or other applicable license agreement, including, 
--without limitation, that your use is for the sole purpose of 
--programming logic devices manufactured by Altera and sold by 
--Altera or its authorized distributors.  Please refer to the 
--applicable agreement for further details.


LIBRARY ieee;
USE ieee.std_logic_1164.all;

LIBRARY altera_mf;
USE altera_mf.all;

ENTITY pll IS
    PORT
    (
        inclk0      : IN STD_LOGIC  := '0';
        c0      : OUT STD_LOGIC ;
        locked      : OUT STD_LOGIC 
    );
END pll;


ARCHITECTURE SYN OF pll IS

    SIGNAL sub_wire0    : STD_LOGIC_VECTOR (5 DOWNTO 0);
    SIGNAL sub_wire1    : STD_LOGIC ;
    SIGNAL sub_wire2    : STD_LOGIC ;
    SIGNAL sub_wire3    : STD_LOGIC ;
    SIGNAL sub_wire4    : STD_LOGIC_VECTOR (1 DOWNTO 0);
    SIGNAL sub_wire5_bv : BIT_VECTOR (0 DOWNTO 0);
    SIGNAL sub_wire5    : STD_LOGIC_VECTOR (0 DOWNTO 0);



    COMPONENT altpll
    GENERIC (
        clk0_divide_by      : natural;
        clk0_duty_cycle     : natural;
        clk0_multiply_by        : natural;
        clk0_phase_shift        : string;
        compensate_clock        : string;
        gate_lock_signal        : string;
        inclk0_input_frequency      : natural;
        intended_device_family      : string;
        invalid_lock_multiplier     : natural;
        lpm_hint        : string;
        lpm_type        : string;
        operation_mode      : string;
        port_activeclock        : string;
        port_areset     : string;
        port_clkbad0        : string;
        port_clkbad1        : string;
        port_clkloss        : string;
        port_clkswitch      : string;
        port_configupdate       : string;
        port_fbin       : string;
        port_inclk0     : string;
        port_inclk1     : string;
        port_locked     : string;
        port_pfdena     : string;
        port_phasecounterselect     : string;
        port_phasedone      : string;
        port_phasestep      : string;
        port_phaseupdown        : string;
        port_pllena     : string;
        port_scanaclr       : string;
        port_scanclk        : string;
        port_scanclkena     : string;
        port_scandata       : string;
        port_scandataout        : string;
        port_scandone       : string;
        port_scanread       : string;
        port_scanwrite      : string;
        port_clk0       : string;
        port_clk1       : string;
        port_clk2       : string;
        port_clk3       : string;
        port_clk4       : string;
        port_clk5       : string;
        port_clkena0        : string;
        port_clkena1        : string;
        port_clkena2        : string;
        port_clkena3        : string;
        port_clkena4        : string;
        port_clkena5        : string;
        port_extclk0        : string;
        port_extclk1        : string;
        port_extclk2        : string;
        port_extclk3        : string;
        valid_lock_multiplier       : natural
    );
    PORT (
            clk : OUT STD_LOGIC_VECTOR (5 DOWNTO 0);
            inclk   : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
            locked  : OUT STD_LOGIC 
    );
    END COMPONENT;

BEGIN
    sub_wire5_bv(0 DOWNTO 0) <= "0";
    sub_wire5    <= To_stdlogicvector(sub_wire5_bv);
    sub_wire1    <= sub_wire0(0);
    c0    <= sub_wire1;
    locked    <= sub_wire2;
    sub_wire3    <= inclk0;
    sub_wire4    <= sub_wire5(0 DOWNTO 0) & sub_wire3;

    altpll_component : altpll
    GENERIC MAP (
        clk0_divide_by => 2,
        clk0_duty_cycle => 50,
        clk0_multiply_by => 3,
        clk0_phase_shift => "0",
        compensate_clock => "CLK0",
        gate_lock_signal => "NO",
        inclk0_input_frequency => 20000,
        intended_device_family => "Cyclone II",
        invalid_lock_multiplier => 5,
        lpm_hint => "CBX_MODULE_PREFIX=pll_altera",
        lpm_type => "altpll",
        operation_mode => "NORMAL",
        port_activeclock => "PORT_UNUSED",
        port_areset => "PORT_UNUSED",
        port_clkbad0 => "PORT_UNUSED",
        port_clkbad1 => "PORT_UNUSED",
        port_clkloss => "PORT_UNUSED",
        port_clkswitch => "PORT_UNUSED",
        port_configupdate => "PORT_UNUSED",
        port_fbin => "PORT_UNUSED",
        port_inclk0 => "PORT_USED",
        port_inclk1 => "PORT_UNUSED",
        port_locked => "PORT_USED",
        port_pfdena => "PORT_UNUSED",
        port_phasecounterselect => "PORT_UNUSED",
        port_phasedone => "PORT_UNUSED",
        port_phasestep => "PORT_UNUSED",
        port_phaseupdown => "PORT_UNUSED",
        port_pllena => "PORT_UNUSED",
        port_scanaclr => "PORT_UNUSED",
        port_scanclk => "PORT_UNUSED",
        port_scanclkena => "PORT_UNUSED",
        port_scandata => "PORT_UNUSED",
        port_scandataout => "PORT_UNUSED",
        port_scandone => "PORT_UNUSED",
        port_scanread => "PORT_UNUSED",
        port_scanwrite => "PORT_UNUSED",
        port_clk0 => "PORT_USED",
        port_clk1 => "PORT_UNUSED",
        port_clk2 => "PORT_UNUSED",
        port_clk3 => "PORT_UNUSED",
        port_clk4 => "PORT_UNUSED",
        port_clk5 => "PORT_UNUSED",
        port_clkena0 => "PORT_UNUSED",
        port_clkena1 => "PORT_UNUSED",
        port_clkena2 => "PORT_UNUSED",
        port_clkena3 => "PORT_UNUSED",
        port_clkena4 => "PORT_UNUSED",
        port_clkena5 => "PORT_UNUSED",
        port_extclk0 => "PORT_UNUSED",
        port_extclk1 => "PORT_UNUSED",
        port_extclk2 => "PORT_UNUSED",
        port_extclk3 => "PORT_UNUSED",
        valid_lock_multiplier => 1
    )
    PORT MAP (
        inclk => sub_wire4,
        clk => sub_wire0,
        locked => sub_wire2
    );



END SYN;

-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_CUSTOM STRING "0"
-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "1"
-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "6"
-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "75.000000"
-- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "50.000"
-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone II"
-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"
-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "1"
-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "75.00000000"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "1"
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
-- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
-- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
-- Retrieval info: PRIVATE: PLL_ENA_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
-- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
-- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_altera.mif"
-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"
-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"
-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
-- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"
-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "2"
-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "3"
-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
-- Retrieval info: CONSTANT: GATE_LOCK_SIGNAL STRING "NO"
-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "20000"
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone II"
-- Retrieval info: CONSTANT: INVALID_LOCK_MULTIPLIER NUMERIC "5"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
-- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
-- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
-- Retrieval info: CONSTANT: VALID_LOCK_MULTIPLIER NUMERIC "1"
-- Retrieval info: USED_PORT: @clk 0 0 6 0 OUTPUT_CLK_EXT VCC "@clk[5..0]"
-- Retrieval info: USED_PORT: @extclk 0 0 4 0 OUTPUT_CLK_EXT VCC "@extclk[3..0]"
-- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]"
-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
-- Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
-- Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_altera.vhd TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_altera.ppf TRUE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_altera.inc FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_altera.cmp FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_altera.bsf FALSE
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_altera_inst.vhd FALSE
-- Retrieval info: LIB_FILE: altera_mf
-- Retrieval info: CBX_MODULE_PREFIX: ON