123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369 |
- /*
- * Asterisk -- A telephony toolkit for Linux.
- *
- * Translate between signed linear and LPC10 (Linear Predictor Code)
- *
- * The lpc10 code is from a library used by nautilus, modified to be a bit
- * nicer to the compiler.
- *
- * See http://www.arl.wustl.edu/~jaf/
- *
- * Copyright (C) 1999, Mark Spencer
- *
- * Mark Spencer <markster@linux-support.net>
- *
- * This program is free software, distributed under the terms of
- * the GNU General Public License
- */
- #include <asterisk/lock.h>
- #include <asterisk/translate.h>
- #include <asterisk/module.h>
- #include <asterisk/logger.h>
- #include <asterisk/channel.h>
- #include <fcntl.h>
- #include <stdlib.h>
- #include <unistd.h>
- #include <netinet/in.h>
- #include <string.h>
- #include <stdio.h>
- #include "lpc10/lpc10.h"
- /* Sample frame data */
- #include "slin_lpc10_ex.h"
- #include "lpc10_slin_ex.h"
- /* We use a very strange format here... I have no idea why... The frames are 180
- samples long, which isn't even an even number of milliseconds... Not only that
- but we hvae to waste two bits of each frame to keep them ending on a byte boundary
- because the frames are 54 bits long */
- #define LPC10_BYTES_IN_COMPRESSED_FRAME (LPC10_BITS_IN_COMPRESSED_FRAME + 7)/8
- AST_MUTEX_DEFINE_STATIC(localuser_lock);
- static int localusecnt=0;
- static char *tdesc = "LPC10 2.4kbps (signed linear) Voice Coder";
- struct ast_translator_pvt {
- union {
- struct lpc10_encoder_state *enc;
- struct lpc10_decoder_state *dec;
- } lpc10;
- struct ast_frame f;
- /* Space to build offset */
- char offset[AST_FRIENDLY_OFFSET];
- /* Buffer for our outgoing frame */
- short outbuf[8000];
- /* Enough to store a full second */
- short buf[8000];
- int tail;
- int longer;
- };
- #define lpc10_coder_pvt ast_translator_pvt
- static struct ast_translator_pvt *lpc10_enc_new(void)
- {
- struct lpc10_coder_pvt *tmp;
- tmp = malloc(sizeof(struct lpc10_coder_pvt));
- if (tmp) {
- if (!(tmp->lpc10.enc = create_lpc10_encoder_state())) {
- free(tmp);
- tmp = NULL;
- }
- tmp->tail = 0;
- tmp->longer = 0;
- localusecnt++;
- }
- return tmp;
- }
- static struct ast_translator_pvt *lpc10_dec_new(void)
- {
- struct lpc10_coder_pvt *tmp;
- tmp = malloc(sizeof(struct lpc10_coder_pvt));
- if (tmp) {
- if (!(tmp->lpc10.dec = create_lpc10_decoder_state())) {
- free(tmp);
- tmp = NULL;
- }
- tmp->tail = 0;
- tmp->longer = 0;
- localusecnt++;
- }
- return tmp;
- }
- static struct ast_frame *lintolpc10_sample(void)
- {
- static struct ast_frame f;
- f.frametype = AST_FRAME_VOICE;
- f.subclass = AST_FORMAT_SLINEAR;
- f.datalen = sizeof(slin_lpc10_ex);
- /* Assume 8000 Hz */
- f.samples = LPC10_SAMPLES_PER_FRAME;
- f.mallocd = 0;
- f.offset = 0;
- f.src = __PRETTY_FUNCTION__;
- f.data = slin_lpc10_ex;
- return &f;
- }
- static struct ast_frame *lpc10tolin_sample(void)
- {
- static struct ast_frame f;
- f.frametype = AST_FRAME_VOICE;
- f.subclass = AST_FORMAT_LPC10;
- f.datalen = sizeof(lpc10_slin_ex);
- /* All frames are 22 ms long (maybe a little more -- why did he choose
- LPC10_SAMPLES_PER_FRAME sample frames anyway?? */
- f.samples = LPC10_SAMPLES_PER_FRAME;
- f.mallocd = 0;
- f.offset = 0;
- f.src = __PRETTY_FUNCTION__;
- f.data = lpc10_slin_ex;
- return &f;
- }
- static struct ast_frame *lpc10tolin_frameout(struct ast_translator_pvt *tmp)
- {
- if (!tmp->tail)
- return NULL;
- /* Signed linear is no particular frame size, so just send whatever
- we have in the buffer in one lump sum */
- tmp->f.frametype = AST_FRAME_VOICE;
- tmp->f.subclass = AST_FORMAT_SLINEAR;
- tmp->f.datalen = tmp->tail * 2;
- /* Assume 8000 Hz */
- tmp->f.samples = tmp->tail;
- tmp->f.mallocd = 0;
- tmp->f.offset = AST_FRIENDLY_OFFSET;
- tmp->f.src = __PRETTY_FUNCTION__;
- tmp->f.data = tmp->buf;
- /* Reset tail pointer */
- tmp->tail = 0;
- #if 0
- /* Save a sample frame */
- { static int samplefr = 0;
- if (samplefr == 80) {
- int fd;
- fd = open("lpc10.example", O_WRONLY | O_CREAT, 0644);
- write(fd, tmp->f.data, tmp->f.datalen);
- close(fd);
- }
- samplefr++;
- }
- #endif
- return &tmp->f;
- }
- static void extract_bits(INT32 *bits, unsigned char *c)
- {
- int x;
- for (x=0;x<LPC10_BITS_IN_COMPRESSED_FRAME;x++) {
- if (*c & (0x80 >> (x & 7)))
- bits[x] = 1;
- else
- bits[x] = 0;
- if ((x & 7) == 7)
- c++;
- }
- }
- static void build_bits(unsigned char *c, INT32 *bits)
- {
- unsigned char mask=0x80;
- int x;
- *c = 0;
- for (x=0;x<LPC10_BITS_IN_COMPRESSED_FRAME;x++) {
- if (bits[x])
- *c |= mask;
- mask = mask >> 1;
- if ((x % 8)==7) {
- c++;
- *c = 0;
- mask = 0x80;
- }
- }
- }
- static int lpc10tolin_framein(struct ast_translator_pvt *tmp, struct ast_frame *f)
- {
- /* Assuming there's space left, decode into the current buffer at
- the tail location */
- int x;
- int len=0;
- float tmpbuf[LPC10_SAMPLES_PER_FRAME];
- short *sd;
- INT32 bits[LPC10_BITS_IN_COMPRESSED_FRAME];
- while(len + LPC10_BYTES_IN_COMPRESSED_FRAME <= f->datalen) {
- if (tmp->tail + LPC10_SAMPLES_PER_FRAME < sizeof(tmp->buf)/2) {
- sd = tmp->buf + tmp->tail;
- extract_bits(bits, f->data + len);
- if (lpc10_decode(bits, tmpbuf, tmp->lpc10.dec)) {
- ast_log(LOG_WARNING, "Invalid lpc10 data\n");
- return -1;
- }
- for (x=0;x<LPC10_SAMPLES_PER_FRAME;x++) {
- /* Convert to a real between -1.0 and 1.0 */
- sd[x] = 32768.0 * tmpbuf[x];
- }
-
- tmp->tail+=LPC10_SAMPLES_PER_FRAME;
- } else {
- ast_log(LOG_WARNING, "Out of buffer space\n");
- return -1;
- }
- len += LPC10_BYTES_IN_COMPRESSED_FRAME;
- }
- if (len != f->datalen)
- printf("Decoded %d, expected %d\n", len, f->datalen);
- return 0;
- }
- static int lintolpc10_framein(struct ast_translator_pvt *tmp, struct ast_frame *f)
- {
- /* Just add the frames to our stream */
- /* XXX We should look at how old the rest of our stream is, and if it
- is too old, then we should overwrite it entirely, otherwise we can
- get artifacts of earlier talk that do not belong */
- if (tmp->tail + f->datalen < sizeof(tmp->buf) / 2) {
- memcpy((tmp->buf + tmp->tail), f->data, f->datalen);
- tmp->tail += f->datalen/2;
- } else {
- ast_log(LOG_WARNING, "Out of buffer space\n");
- return -1;
- }
- return 0;
- }
- static struct ast_frame *lintolpc10_frameout(struct ast_translator_pvt *tmp)
- {
- int x;
- int consumed = 0;
- float tmpbuf[LPC10_SAMPLES_PER_FRAME];
- INT32 bits[LPC10_BITS_IN_COMPRESSED_FRAME];
- /* We can't work on anything less than a frame in size */
- if (tmp->tail < LPC10_SAMPLES_PER_FRAME)
- return NULL;
- /* Start with an empty frame */
- tmp->f.samples = 0;
- tmp->f.datalen = 0;
- tmp->f.frametype = AST_FRAME_VOICE;
- tmp->f.subclass = AST_FORMAT_LPC10;
- while(tmp->tail >= LPC10_SAMPLES_PER_FRAME) {
- if (tmp->f.datalen + LPC10_BYTES_IN_COMPRESSED_FRAME > sizeof(tmp->outbuf)) {
- ast_log(LOG_WARNING, "Out of buffer space\n");
- return NULL;
- }
- /* Encode a frame of data */
- for (x=0;x<LPC10_SAMPLES_PER_FRAME;x++) {
- tmpbuf[x] = (float)tmp->buf[x+consumed] / 32768.0;
- }
- lpc10_encode(tmpbuf, bits, tmp->lpc10.enc);
- build_bits(((unsigned char *)tmp->outbuf) + tmp->f.datalen, bits);
- tmp->f.datalen += LPC10_BYTES_IN_COMPRESSED_FRAME;
- tmp->f.samples += LPC10_SAMPLES_PER_FRAME;
- /* Use one of the two left over bits to record if this is a 22 or 23 ms frame...
- important for IAX use */
- tmp->longer = 1 - tmp->longer;
- #if 0 /* what the heck was this for? */
- ((char *)(tmp->f.data))[consumed - 1] |= tmp->longer;
- #endif
- tmp->tail -= LPC10_SAMPLES_PER_FRAME;
- consumed += LPC10_SAMPLES_PER_FRAME;
- }
- tmp->f.mallocd = 0;
- tmp->f.offset = AST_FRIENDLY_OFFSET;
- tmp->f.src = __PRETTY_FUNCTION__;
- tmp->f.data = tmp->outbuf;
- /* Move the data at the end of the buffer to the front */
- if (tmp->tail)
- memmove(tmp->buf, tmp->buf + consumed, tmp->tail * 2);
- #if 0
- /* Save a sample frame */
- { static int samplefr = 0;
- if (samplefr == 0) {
- int fd;
- fd = open("lpc10.example", O_WRONLY | O_CREAT, 0644);
- write(fd, tmp->f.data, tmp->f.datalen);
- close(fd);
- }
- samplefr++;
- }
- #endif
- return &tmp->f;
- }
- static void lpc10_destroy(struct ast_translator_pvt *pvt)
- {
- /* Enc and DEC are both just allocated, so they can be freed */
- free(pvt->lpc10.enc);
- free(pvt);
- localusecnt--;
- }
- static struct ast_translator lpc10tolin =
- { "lpc10tolin",
- AST_FORMAT_LPC10, AST_FORMAT_SLINEAR,
- lpc10_dec_new,
- lpc10tolin_framein,
- lpc10tolin_frameout,
- lpc10_destroy,
- lpc10tolin_sample
- };
- static struct ast_translator lintolpc10 =
- { "lintolpc10",
- AST_FORMAT_SLINEAR, AST_FORMAT_LPC10,
- lpc10_enc_new,
- lintolpc10_framein,
- lintolpc10_frameout,
- lpc10_destroy,
- lintolpc10_sample
- };
- int unload_module(void)
- {
- int res;
- ast_mutex_lock(&localuser_lock);
- res = ast_unregister_translator(&lintolpc10);
- if (!res)
- res = ast_unregister_translator(&lpc10tolin);
- if (localusecnt)
- res = -1;
- ast_mutex_unlock(&localuser_lock);
- return res;
- }
- int load_module(void)
- {
- int res;
- res=ast_register_translator(&lpc10tolin);
- if (!res)
- res=ast_register_translator(&lintolpc10);
- else
- ast_unregister_translator(&lpc10tolin);
- return res;
- }
- char *description(void)
- {
- return tdesc;
- }
- int usecount(void)
- {
- int res;
- STANDARD_USECOUNT(res);
- return res;
- }
- char *key()
- {
- return ASTERISK_GPL_KEY;
- }
|