kernel_xiaomi_lancelot/arch/x86/kernel/head_64.S

/* SPDX-License-Identifier: GPL-2.0 */
/*
 *  linux/arch/x86/kernel/head_64.S -- start in 32bit and switch to 64bit
 *
 *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
 *  Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
 *  Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
 *  Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
 *  Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
 */


#include <linux/linkage.h>
#include <linux/threads.h>
#include <linux/init.h>
#include <asm/segment.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/cache.h>
#include <asm/processor-flags.h>
#include <asm/percpu.h>
#include <asm/nops.h>
#include "../entry/calling.h"
#include <asm/export.h>
#include <asm/nospec-branch.h>
#include <asm/fixmap.h>

#ifdef CONFIG_PARAVIRT
#include <asm/asm-offsets.h>
#include <asm/paravirt.h>
#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
#else
#define GET_CR2_INTO(reg) movq %cr2, reg
#define INTERRUPT_RETURN iretq
#endif

/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
 * because we need identity-mapped pages.
 *
 */

#define pud_index(x)	(((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))

#if defined(CONFIG_XEN_PV) || defined(CONFIG_XEN_PVH)
PGD_PAGE_OFFSET = pgd_index(__PAGE_OFFSET_BASE)
PGD_START_KERNEL = pgd_index(__START_KERNEL_map)
#endif
L3_START_KERNEL = pud_index(__START_KERNEL_map)

	.text
	__HEAD
	.code64
	.globl startup_64
startup_64:
	UNWIND_HINT_EMPTY
	/*
	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
	 * and someone has loaded an identity mapped page table
	 * for us.  These identity mapped page tables map all of the
	 * kernel pages and possibly all of memory.
	 *
	 * %rsi holds a physical pointer to real_mode_data.
	 *
	 * We come here either directly from a 64bit bootloader, or from
	 * arch/x86/boot/compressed/head_64.S.
	 *
	 * We only come here initially at boot nothing else comes here.
	 *
	 * Since we may be loaded at an address different from what we were
	 * compiled to run at we first fixup the physical addresses in our page
	 * tables and then reload them.
	 */

	/* Set up the stack for verify_cpu(), similar to initial_stack below */
	leaq	(__end_init_task - SIZEOF_PTREGS)(%rip), %rsp

	/* Sanitize CPU configuration */
	call verify_cpu

	/*
	 * Perform pagetable fixups. Additionally, if SME is active, encrypt
	 * the kernel and retrieve the modifier (SME encryption mask if SME
	 * is active) to be added to the initial pgdir entry that will be
	 * programmed into CR3.
	 */
	leaq	_text(%rip), %rdi
	pushq	%rsi
	call	__startup_64
	popq	%rsi

	/* Form the CR3 value being sure to include the CR3 modifier */
	addq	$(early_top_pgt - __START_KERNEL_map), %rax
	jmp 1f
ENTRY(secondary_startup_64)
	UNWIND_HINT_EMPTY
	/*
	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
	 * and someone has loaded a mapped page table.
	 *
	 * %rsi holds a physical pointer to real_mode_data.
	 *
	 * We come here either from startup_64 (using physical addresses)
	 * or from trampoline.S (using virtual addresses).
	 *
	 * Using virtual addresses from trampoline.S removes the need
	 * to have any identity mapped pages in the kernel page table
	 * after the boot processor executes this code.
	 */

	/* Sanitize CPU configuration */
	call verify_cpu

	/*
	 * Retrieve the modifier (SME encryption mask if SME is active) to be
	 * added to the initial pgdir entry that will be programmed into CR3.
	 */
	pushq	%rsi
	call	__startup_secondary_64
	popq	%rsi

	/* Form the CR3 value being sure to include the CR3 modifier */
	addq	$(init_top_pgt - __START_KERNEL_map), %rax
1:

	/* Enable PAE mode, PGE and LA57 */
	movl	$(X86_CR4_PAE | X86_CR4_PGE), %ecx
#ifdef CONFIG_X86_5LEVEL
	orl	$X86_CR4_LA57, %ecx
#endif
	movq	%rcx, %cr4

	/* Setup early boot stage 4-/5-level pagetables. */
	addq	phys_base(%rip), %rax
	movq	%rax, %cr3

	/* Ensure I am executing from virtual addresses */
	movq	$1f, %rax
	ANNOTATE_RETPOLINE_SAFE
	jmp	*%rax
1:
	UNWIND_HINT_EMPTY

	/* Check if nx is implemented */
	movl	$0x80000001, %eax
	cpuid
	movl	%edx,%edi

	/* Setup EFER (Extended Feature Enable Register) */
	movl	$MSR_EFER, %ecx
	rdmsr
	btsl	$_EFER_SCE, %eax	/* Enable System Call */
	btl	$20,%edi		/* No Execute supported? */
	jnc     1f
	btsl	$_EFER_NX, %eax
	btsq	$_PAGE_BIT_NX,early_pmd_flags(%rip)
1:	wrmsr				/* Make changes effective */

	/* Setup cr0 */
	movl	$CR0_STATE, %eax
	/* Make changes effective */
	movq	%rax, %cr0

	/* Setup a boot time stack */
	movq initial_stack(%rip), %rsp

	/* zero EFLAGS after setting rsp */
	pushq $0
	popfq

	/*
	 * We must switch to a new descriptor in kernel space for the GDT
	 * because soon the kernel won't have access anymore to the userspace
	 * addresses where we're currently running on. We have to do that here
	 * because in 32bit we couldn't load a 64bit linear address.
	 */
	lgdt	early_gdt_descr(%rip)

	/* set up data segments */
	xorl %eax,%eax
	movl %eax,%ds
	movl %eax,%ss
	movl %eax,%es

	/*
	 * We don't really need to load %fs or %gs, but load them anyway
	 * to kill any stale realmode selectors.  This allows execution
	 * under VT hardware.
	 */
	movl %eax,%fs
	movl %eax,%gs

	/* Set up %gs.
	 *
	 * The base of %gs always points to the bottom of the irqstack
	 * union.  If the stack protector canary is enabled, it is
	 * located at %gs:40.  Note that, on SMP, the boot cpu uses
	 * init data section till per cpu areas are set up.
	 */
	movl	$MSR_GS_BASE,%ecx
	movl	initial_gs(%rip),%eax
	movl	initial_gs+4(%rip),%edx
	wrmsr

	/* rsi is pointer to real mode structure with interesting info.
	   pass it to C */
	movq	%rsi, %rdi

.Ljump_to_C_code:
	/*
	 * Jump to run C code and to be on a real kernel address.
	 * Since we are running on identity-mapped space we have to jump
	 * to the full 64bit address, this is only possible as indirect
	 * jump.  In addition we need to ensure %cs is set so we make this
	 * a far return.
	 *
	 * Note: do not change to far jump indirect with 64bit offset.
	 *
	 * AMD does not support far jump indirect with 64bit offset.
	 * AMD64 Architecture Programmer's Manual, Volume 3: states only
	 *	JMP FAR mem16:16 FF /5 Far jump indirect,
	 *		with the target specified by a far pointer in memory.
	 *	JMP FAR mem16:32 FF /5 Far jump indirect,
	 *		with the target specified by a far pointer in memory.
	 *
	 * Intel64 does support 64bit offset.
	 * Software Developer Manual Vol 2: states:
	 *	FF /5 JMP m16:16 Jump far, absolute indirect,
	 *		address given in m16:16
	 *	FF /5 JMP m16:32 Jump far, absolute indirect,
	 *		address given in m16:32.
	 *	REX.W + FF /5 JMP m16:64 Jump far, absolute indirect,
	 *		address given in m16:64.
	 */
	pushq	$.Lafter_lret	# put return address on stack for unwinder
	xorq	%rbp, %rbp	# clear frame pointer
	movq	initial_code(%rip), %rax
	pushq	$__KERNEL_CS	# set correct cs
	pushq	%rax		# target address in negative space
	lretq
.Lafter_lret:
END(secondary_startup_64)

#include "verify_cpu.S"

#ifdef CONFIG_HOTPLUG_CPU
/*
 * Boot CPU0 entry point. It's called from play_dead(). Everything has been set
 * up already except stack. We just set up stack here. Then call
 * start_secondary() via .Ljump_to_C_code.
 */
ENTRY(start_cpu0)
	movq	initial_stack(%rip), %rsp
	UNWIND_HINT_EMPTY
	jmp	.Ljump_to_C_code
ENDPROC(start_cpu0)
#endif

	/* Both SMP bootup and ACPI suspend change these variables */
	__REFDATA
	.balign	8
	GLOBAL(initial_code)
	.quad	x86_64_start_kernel
	GLOBAL(initial_gs)
	.quad	INIT_PER_CPU_VAR(irq_stack_union)
	GLOBAL(initial_stack)
	/*
	 * The SIZEOF_PTREGS gap is a convention which helps the in-kernel
	 * unwinder reliably detect the end of the stack.
	 */
	.quad  init_thread_union + THREAD_SIZE - SIZEOF_PTREGS
	__FINITDATA

	__INIT
ENTRY(early_idt_handler_array)
	i = 0
	.rept NUM_EXCEPTION_VECTORS
	.if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
		UNWIND_HINT_IRET_REGS
		pushq $0	# Dummy error code, to make stack frame uniform
	.else
		UNWIND_HINT_IRET_REGS offset=8
	.endif
	pushq $i		# 72(%rsp) Vector number
	jmp early_idt_handler_common
	UNWIND_HINT_IRET_REGS
	i = i + 1
	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
	.endr
	UNWIND_HINT_IRET_REGS offset=16
END(early_idt_handler_array)

early_idt_handler_common:
	/*
	 * The stack is the hardware frame, an error code or zero, and the
	 * vector number.
	 */
	cld

	incl early_recursion_flag(%rip)

	/* The vector number is currently in the pt_regs->di slot. */
	pushq %rsi				/* pt_regs->si */
	movq 8(%rsp), %rsi			/* RSI = vector number */
	movq %rdi, 8(%rsp)			/* pt_regs->di = RDI */
	pushq %rdx				/* pt_regs->dx */
	pushq %rcx				/* pt_regs->cx */
	pushq %rax				/* pt_regs->ax */
	pushq %r8				/* pt_regs->r8 */
	pushq %r9				/* pt_regs->r9 */
	pushq %r10				/* pt_regs->r10 */
	pushq %r11				/* pt_regs->r11 */
	pushq %rbx				/* pt_regs->bx */
	pushq %rbp				/* pt_regs->bp */
	pushq %r12				/* pt_regs->r12 */
	pushq %r13				/* pt_regs->r13 */
	pushq %r14				/* pt_regs->r14 */
	pushq %r15				/* pt_regs->r15 */
	UNWIND_HINT_REGS

	cmpq $14,%rsi		/* Page fault? */
	jnz 10f
	GET_CR2_INTO(%rdi)	/* Can clobber any volatile register if pv */
	call early_make_pgtable
	andl %eax,%eax
	jz 20f			/* All good */

10:
	movq %rsp,%rdi		/* RDI = pt_regs; RSI is already trapnr */
	call early_fixup_exception

20:
	decl early_recursion_flag(%rip)
	jmp restore_regs_and_return_to_kernel
END(early_idt_handler_common)

	__INITDATA

	.balign 4
GLOBAL(early_recursion_flag)
	.long 0

#define NEXT_PAGE(name) \
	.balign	PAGE_SIZE; \
GLOBAL(name)

#ifdef CONFIG_PAGE_TABLE_ISOLATION
/*
 * Each PGD needs to be 8k long and 8k aligned.  We do not
 * ever go out to userspace with these, so we do not
 * strictly *need* the second page, but this allows us to
 * have a single set_pgd() implementation that does not
 * need to worry about whether it has 4k or 8k to work
 * with.
 *
 * This ensures PGDs are 8k long:
 */
#define PTI_USER_PGD_FILL	512
/* This ensures they are 8k-aligned: */
#define NEXT_PGD_PAGE(name) \
	.balign 2 * PAGE_SIZE; \
GLOBAL(name)
#else
#define NEXT_PGD_PAGE(name) NEXT_PAGE(name)
#define PTI_USER_PGD_FILL	0
#endif

/* Automate the creation of 1 to 1 mapping pmd entries */
#define PMDS(START, PERM, COUNT)			\
	i = 0 ;						\
	.rept (COUNT) ;					\
	.quad	(START) + (i << PMD_SHIFT) + (PERM) ;	\
	i = i + 1 ;					\
	.endr

	__INITDATA
NEXT_PGD_PAGE(early_top_pgt)
	.fill	511,8,0
#ifdef CONFIG_X86_5LEVEL
	.quad	level4_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
#else
	.quad	level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
#endif
	.fill	PTI_USER_PGD_FILL,8,0

NEXT_PAGE(early_dynamic_pgts)
	.fill	512*EARLY_DYNAMIC_PAGE_TABLES,8,0

	.data

#if defined(CONFIG_XEN_PV) || defined(CONFIG_XEN_PVH)
NEXT_PGD_PAGE(init_top_pgt)
	.quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
	.org    init_top_pgt + PGD_PAGE_OFFSET*8, 0
	.quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
	.org    init_top_pgt + PGD_START_KERNEL*8, 0
	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
	.quad   level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
	.fill	PTI_USER_PGD_FILL,8,0

NEXT_PAGE(level3_ident_pgt)
	.quad	level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
	.fill	511, 8, 0
NEXT_PAGE(level2_ident_pgt)
	/* Since I easily can, map the first 1G.
	 * Don't set NX because code runs from these pages.
	 */
	PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
#else
NEXT_PGD_PAGE(init_top_pgt)
	.fill	512,8,0
	.fill	PTI_USER_PGD_FILL,8,0
#endif

#ifdef CONFIG_X86_5LEVEL
NEXT_PAGE(level4_kernel_pgt)
	.fill	511,8,0
	.quad	level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
#endif

NEXT_PAGE(level3_kernel_pgt)
	.fill	L3_START_KERNEL,8,0
	/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
	.quad	level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
	.quad	level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC

NEXT_PAGE(level2_kernel_pgt)
	/*
	 * 512 MB kernel mapping. We spend a full page on this pagetable
	 * anyway.
	 *
	 * The kernel code+data+bss must not be bigger than that.
	 *
	 * (NOTE: at +512MB starts the module area, see MODULES_VADDR.
	 *  If you want to increase this then increase MODULES_VADDR
	 *  too.)
	 */
	PMDS(0, __PAGE_KERNEL_LARGE_EXEC,
		KERNEL_IMAGE_SIZE/PMD_SIZE)

NEXT_PAGE(level2_fixmap_pgt)
	.fill	(512 - 4 - FIXMAP_PMD_NUM),8,0
	pgtno = 0
	.rept (FIXMAP_PMD_NUM)
	.quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map \
		+ _PAGE_TABLE_NOENC;
	pgtno = pgtno + 1
	.endr
	/* 6 MB reserved space + a 2MB hole */
	.fill	4,8,0

NEXT_PAGE(level1_fixmap_pgt)
	.rept (FIXMAP_PMD_NUM)
	.fill	512,8,0
	.endr

#undef PMDS

	.data
	.align 16
	.globl early_gdt_descr
early_gdt_descr:
	.word	GDT_ENTRIES*8-1
early_gdt_descr_base:
	.quad	INIT_PER_CPU_VAR(gdt_page)

ENTRY(phys_base)
	/* This must match the first entry in level2_kernel_pgt */
	.quad   0x0000000000000000
EXPORT_SYMBOL(phys_base)

#include "../../x86/xen/xen-head.S"

	__PAGE_ALIGNED_BSS
NEXT_PAGE(empty_zero_page)
	.skip PAGE_SIZE
EXPORT_SYMBOL(empty_zero_page)