123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339 |
- /*
- * Copyright (C) 2012 Avionic Design GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/bcd.h>
- #include <linux/i2c.h>
- #include <linux/module.h>
- #include <linux/rtc.h>
- #include <linux/of.h>
- #define DRIVER_NAME "rtc-pcf8523"
- #define REG_CONTROL1 0x00
- #define REG_CONTROL1_CAP_SEL (1 << 7)
- #define REG_CONTROL1_STOP (1 << 5)
- #define REG_CONTROL3 0x02
- #define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
- #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
- #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
- #define REG_CONTROL3_PM_MASK 0xe0
- #define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
- #define REG_SECONDS 0x03
- #define REG_SECONDS_OS (1 << 7)
- #define REG_MINUTES 0x04
- #define REG_HOURS 0x05
- #define REG_DAYS 0x06
- #define REG_WEEKDAYS 0x07
- #define REG_MONTHS 0x08
- #define REG_YEARS 0x09
- struct pcf8523 {
- struct rtc_device *rtc;
- };
- static int pcf8523_read(struct i2c_client *client, u8 reg, u8 *valuep)
- {
- struct i2c_msg msgs[2];
- u8 value = 0;
- int err;
- msgs[0].addr = client->addr;
- msgs[0].flags = 0;
- msgs[0].len = sizeof(reg);
- msgs[0].buf = ®
- msgs[1].addr = client->addr;
- msgs[1].flags = I2C_M_RD;
- msgs[1].len = sizeof(value);
- msgs[1].buf = &value;
- err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (err < 0)
- return err;
- *valuep = value;
- return 0;
- }
- static int pcf8523_write(struct i2c_client *client, u8 reg, u8 value)
- {
- u8 buffer[2] = { reg, value };
- struct i2c_msg msg;
- int err;
- msg.addr = client->addr;
- msg.flags = 0;
- msg.len = sizeof(buffer);
- msg.buf = buffer;
- err = i2c_transfer(client->adapter, &msg, 1);
- if (err < 0)
- return err;
- return 0;
- }
- static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
- {
- u8 value;
- int err;
- err = pcf8523_read(client, REG_CONTROL1, &value);
- if (err < 0)
- return err;
- if (!high)
- value &= ~REG_CONTROL1_CAP_SEL;
- else
- value |= REG_CONTROL1_CAP_SEL;
- err = pcf8523_write(client, REG_CONTROL1, value);
- if (err < 0)
- return err;
- return err;
- }
- static int pcf8523_set_pm(struct i2c_client *client, u8 pm)
- {
- u8 value;
- int err;
- err = pcf8523_read(client, REG_CONTROL3, &value);
- if (err < 0)
- return err;
- value = (value & ~REG_CONTROL3_PM_MASK) | pm;
- err = pcf8523_write(client, REG_CONTROL3, value);
- if (err < 0)
- return err;
- return 0;
- }
- static int pcf8523_stop_rtc(struct i2c_client *client)
- {
- u8 value;
- int err;
- err = pcf8523_read(client, REG_CONTROL1, &value);
- if (err < 0)
- return err;
- value |= REG_CONTROL1_STOP;
- err = pcf8523_write(client, REG_CONTROL1, value);
- if (err < 0)
- return err;
- return 0;
- }
- static int pcf8523_start_rtc(struct i2c_client *client)
- {
- u8 value;
- int err;
- err = pcf8523_read(client, REG_CONTROL1, &value);
- if (err < 0)
- return err;
- value &= ~REG_CONTROL1_STOP;
- err = pcf8523_write(client, REG_CONTROL1, value);
- if (err < 0)
- return err;
- return 0;
- }
- static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
- {
- struct i2c_client *client = to_i2c_client(dev);
- u8 start = REG_SECONDS, regs[7];
- struct i2c_msg msgs[2];
- int err;
- msgs[0].addr = client->addr;
- msgs[0].flags = 0;
- msgs[0].len = 1;
- msgs[0].buf = &start;
- msgs[1].addr = client->addr;
- msgs[1].flags = I2C_M_RD;
- msgs[1].len = sizeof(regs);
- msgs[1].buf = regs;
- err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (err < 0)
- return err;
- if (regs[0] & REG_SECONDS_OS)
- return -EINVAL;
- tm->tm_sec = bcd2bin(regs[0] & 0x7f);
- tm->tm_min = bcd2bin(regs[1] & 0x7f);
- tm->tm_hour = bcd2bin(regs[2] & 0x3f);
- tm->tm_mday = bcd2bin(regs[3] & 0x3f);
- tm->tm_wday = regs[4] & 0x7;
- tm->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
- tm->tm_year = bcd2bin(regs[6]) + 100;
- return rtc_valid_tm(tm);
- }
- static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
- {
- struct i2c_client *client = to_i2c_client(dev);
- struct i2c_msg msg;
- u8 regs[8];
- int err;
- /*
- * The hardware can only store values between 0 and 99 in it's YEAR
- * register (with 99 overflowing to 0 on increment).
- * After 2100-02-28 we could start interpreting the year to be in the
- * interval [2100, 2199], but there is no path to switch in a smooth way
- * because the chip handles YEAR=0x00 (and the out-of-spec
- * YEAR=0xa0) as a leap year, but 2100 isn't.
- */
- if (tm->tm_year < 100 || tm->tm_year >= 200)
- return -EINVAL;
- err = pcf8523_stop_rtc(client);
- if (err < 0)
- return err;
- regs[0] = REG_SECONDS;
- /* This will purposely overwrite REG_SECONDS_OS */
- regs[1] = bin2bcd(tm->tm_sec);
- regs[2] = bin2bcd(tm->tm_min);
- regs[3] = bin2bcd(tm->tm_hour);
- regs[4] = bin2bcd(tm->tm_mday);
- regs[5] = tm->tm_wday;
- regs[6] = bin2bcd(tm->tm_mon + 1);
- regs[7] = bin2bcd(tm->tm_year - 100);
- msg.addr = client->addr;
- msg.flags = 0;
- msg.len = sizeof(regs);
- msg.buf = regs;
- err = i2c_transfer(client->adapter, &msg, 1);
- if (err < 0) {
- /*
- * If the time cannot be set, restart the RTC anyway. Note
- * that errors are ignored if the RTC cannot be started so
- * that we have a chance to propagate the original error.
- */
- pcf8523_start_rtc(client);
- return err;
- }
- return pcf8523_start_rtc(client);
- }
- #ifdef CONFIG_RTC_INTF_DEV
- static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
- unsigned long arg)
- {
- struct i2c_client *client = to_i2c_client(dev);
- u8 value;
- int ret = 0, err;
- switch (cmd) {
- case RTC_VL_READ:
- err = pcf8523_read(client, REG_CONTROL3, &value);
- if (err < 0)
- return err;
- if (value & REG_CONTROL3_BLF)
- ret = 1;
- if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
- return -EFAULT;
- return 0;
- default:
- return -ENOIOCTLCMD;
- }
- }
- #else
- #define pcf8523_rtc_ioctl NULL
- #endif
- static const struct rtc_class_ops pcf8523_rtc_ops = {
- .read_time = pcf8523_rtc_read_time,
- .set_time = pcf8523_rtc_set_time,
- .ioctl = pcf8523_rtc_ioctl,
- };
- static int pcf8523_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
- {
- struct pcf8523 *pcf;
- int err;
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
- return -ENODEV;
- pcf = devm_kzalloc(&client->dev, sizeof(*pcf), GFP_KERNEL);
- if (!pcf)
- return -ENOMEM;
- err = pcf8523_select_capacitance(client, true);
- if (err < 0)
- return err;
- err = pcf8523_set_pm(client, 0);
- if (err < 0)
- return err;
- pcf->rtc = devm_rtc_device_register(&client->dev, DRIVER_NAME,
- &pcf8523_rtc_ops, THIS_MODULE);
- if (IS_ERR(pcf->rtc))
- return PTR_ERR(pcf->rtc);
- i2c_set_clientdata(client, pcf);
- return 0;
- }
- static const struct i2c_device_id pcf8523_id[] = {
- { "pcf8523", 0 },
- { }
- };
- MODULE_DEVICE_TABLE(i2c, pcf8523_id);
- #ifdef CONFIG_OF
- static const struct of_device_id pcf8523_of_match[] = {
- { .compatible = "nxp,pcf8523" },
- { }
- };
- MODULE_DEVICE_TABLE(of, pcf8523_of_match);
- #endif
- static struct i2c_driver pcf8523_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .of_match_table = of_match_ptr(pcf8523_of_match),
- },
- .probe = pcf8523_probe,
- .id_table = pcf8523_id,
- };
- module_i2c_driver(pcf8523_driver);
- MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
- MODULE_DESCRIPTION("NXP PCF8523 RTC driver");
- MODULE_LICENSE("GPL v2");
|