123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350 |
- /*
- * simple driver for PWM (Pulse Width Modulator) controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
- */
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/err.h>
- #include <linux/clk.h>
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/pwm.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- /* i.MX1 and i.MX21 share the same PWM function block: */
- #define MX1_PWMC 0x00 /* PWM Control Register */
- #define MX1_PWMS 0x04 /* PWM Sample Register */
- #define MX1_PWMP 0x08 /* PWM Period Register */
- #define MX1_PWMC_EN (1 << 4)
- /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
- #define MX3_PWMCR 0x00 /* PWM Control Register */
- #define MX3_PWMSR 0x04 /* PWM Status Register */
- #define MX3_PWMSAR 0x0C /* PWM Sample Register */
- #define MX3_PWMPR 0x10 /* PWM Period Register */
- #define MX3_PWMCR_PRESCALER(x) ((((x) - 1) & 0xFFF) << 4)
- #define MX3_PWMCR_DOZEEN (1 << 24)
- #define MX3_PWMCR_WAITEN (1 << 23)
- #define MX3_PWMCR_DBGEN (1 << 22)
- #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
- #define MX3_PWMCR_CLKSRC_IPG (1 << 16)
- #define MX3_PWMCR_SWR (1 << 3)
- #define MX3_PWMCR_EN (1 << 0)
- #define MX3_PWMSR_FIFOAV_4WORDS 0x4
- #define MX3_PWMSR_FIFOAV_MASK 0x7
- #define MX3_PWM_SWR_LOOP 5
- struct imx_chip {
- struct clk *clk_per;
- struct clk *clk_ipg;
- void __iomem *mmio_base;
- struct pwm_chip chip;
- int (*config)(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns);
- void (*set_enable)(struct pwm_chip *chip, bool enable);
- };
- #define to_imx_chip(chip) container_of(chip, struct imx_chip, chip)
- static int imx_pwm_config_v1(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns)
- {
- struct imx_chip *imx = to_imx_chip(chip);
- /*
- * The PWM subsystem allows for exact frequencies. However,
- * I cannot connect a scope on my device to the PWM line and
- * thus cannot provide the program the PWM controller
- * exactly. Instead, I'm relying on the fact that the
- * Bootloader (u-boot or WinCE+haret) has programmed the PWM
- * function group already. So I'll just modify the PWM sample
- * register to follow the ratio of duty_ns vs. period_ns
- * accordingly.
- *
- * This is good enough for programming the brightness of
- * the LCD backlight.
- *
- * The real implementation would divide PERCLK[0] first by
- * both the prescaler (/1 .. /128) and then by CLKSEL
- * (/2 .. /16).
- */
- u32 max = readl(imx->mmio_base + MX1_PWMP);
- u32 p = max * duty_ns / period_ns;
- writel(max - p, imx->mmio_base + MX1_PWMS);
- return 0;
- }
- static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
- {
- struct imx_chip *imx = to_imx_chip(chip);
- u32 val;
- val = readl(imx->mmio_base + MX1_PWMC);
- if (enable)
- val |= MX1_PWMC_EN;
- else
- val &= ~MX1_PWMC_EN;
- writel(val, imx->mmio_base + MX1_PWMC);
- }
- static int imx_pwm_config_v2(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns)
- {
- struct imx_chip *imx = to_imx_chip(chip);
- struct device *dev = chip->dev;
- unsigned long long c;
- unsigned long period_cycles, duty_cycles, prescale;
- unsigned int period_ms;
- bool enable = pwm_is_enabled(pwm);
- int wait_count = 0, fifoav;
- u32 cr, sr;
- /*
- * i.MX PWMv2 has a 4-word sample FIFO.
- * In order to avoid FIFO overflow issue, we do software reset
- * to clear all sample FIFO if the controller is disabled or
- * wait for a full PWM cycle to get a relinquished FIFO slot
- * when the controller is enabled and the FIFO is fully loaded.
- */
- if (enable) {
- sr = readl(imx->mmio_base + MX3_PWMSR);
- fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
- if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
- period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
- NSEC_PER_MSEC);
- msleep(period_ms);
- sr = readl(imx->mmio_base + MX3_PWMSR);
- if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
- dev_warn(dev, "there is no free FIFO slot\n");
- }
- } else {
- writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
- do {
- usleep_range(200, 1000);
- cr = readl(imx->mmio_base + MX3_PWMCR);
- } while ((cr & MX3_PWMCR_SWR) &&
- (wait_count++ < MX3_PWM_SWR_LOOP));
- if (cr & MX3_PWMCR_SWR)
- dev_warn(dev, "software reset timeout\n");
- }
- c = clk_get_rate(imx->clk_per);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
- prescale = period_cycles / 0x10000 + 1;
- period_cycles /= prescale;
- c = (unsigned long long)period_cycles * duty_ns;
- do_div(c, period_ns);
- duty_cycles = c;
- /*
- * according to imx pwm RM, the real period value should be
- * PERIOD value in PWMPR plus 2.
- */
- if (period_cycles > 2)
- period_cycles -= 2;
- else
- period_cycles = 0;
- writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
- writel(period_cycles, imx->mmio_base + MX3_PWMPR);
- cr = MX3_PWMCR_PRESCALER(prescale) |
- MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
- MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
- if (enable)
- cr |= MX3_PWMCR_EN;
- writel(cr, imx->mmio_base + MX3_PWMCR);
- return 0;
- }
- static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
- {
- struct imx_chip *imx = to_imx_chip(chip);
- u32 val;
- val = readl(imx->mmio_base + MX3_PWMCR);
- if (enable)
- val |= MX3_PWMCR_EN;
- else
- val &= ~MX3_PWMCR_EN;
- writel(val, imx->mmio_base + MX3_PWMCR);
- }
- static int imx_pwm_config(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns)
- {
- struct imx_chip *imx = to_imx_chip(chip);
- int ret;
- ret = clk_prepare_enable(imx->clk_ipg);
- if (ret)
- return ret;
- ret = imx->config(chip, pwm, duty_ns, period_ns);
- clk_disable_unprepare(imx->clk_ipg);
- return ret;
- }
- static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct imx_chip *imx = to_imx_chip(chip);
- int ret;
- ret = clk_prepare_enable(imx->clk_per);
- if (ret)
- return ret;
- imx->set_enable(chip, true);
- return 0;
- }
- static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
- {
- struct imx_chip *imx = to_imx_chip(chip);
- imx->set_enable(chip, false);
- clk_disable_unprepare(imx->clk_per);
- }
- static struct pwm_ops imx_pwm_ops = {
- .enable = imx_pwm_enable,
- .disable = imx_pwm_disable,
- .config = imx_pwm_config,
- .owner = THIS_MODULE,
- };
- struct imx_pwm_data {
- int (*config)(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns);
- void (*set_enable)(struct pwm_chip *chip, bool enable);
- };
- static struct imx_pwm_data imx_pwm_data_v1 = {
- .config = imx_pwm_config_v1,
- .set_enable = imx_pwm_set_enable_v1,
- };
- static struct imx_pwm_data imx_pwm_data_v2 = {
- .config = imx_pwm_config_v2,
- .set_enable = imx_pwm_set_enable_v2,
- };
- static const struct of_device_id imx_pwm_dt_ids[] = {
- { .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, },
- { .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, },
- { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);
- static int imx_pwm_probe(struct platform_device *pdev)
- {
- const struct of_device_id *of_id =
- of_match_device(imx_pwm_dt_ids, &pdev->dev);
- const struct imx_pwm_data *data;
- struct imx_chip *imx;
- struct resource *r;
- int ret = 0;
- if (!of_id)
- return -ENODEV;
- imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
- if (imx == NULL)
- return -ENOMEM;
- imx->clk_per = devm_clk_get(&pdev->dev, "per");
- if (IS_ERR(imx->clk_per)) {
- dev_err(&pdev->dev, "getting per clock failed with %ld\n",
- PTR_ERR(imx->clk_per));
- return PTR_ERR(imx->clk_per);
- }
- imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(imx->clk_ipg)) {
- dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
- PTR_ERR(imx->clk_ipg));
- return PTR_ERR(imx->clk_ipg);
- }
- imx->chip.ops = &imx_pwm_ops;
- imx->chip.dev = &pdev->dev;
- imx->chip.base = -1;
- imx->chip.npwm = 1;
- imx->chip.can_sleep = true;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(imx->mmio_base))
- return PTR_ERR(imx->mmio_base);
- data = of_id->data;
- imx->config = data->config;
- imx->set_enable = data->set_enable;
- ret = pwmchip_add(&imx->chip);
- if (ret < 0)
- return ret;
- platform_set_drvdata(pdev, imx);
- return 0;
- }
- static int imx_pwm_remove(struct platform_device *pdev)
- {
- struct imx_chip *imx;
- imx = platform_get_drvdata(pdev);
- if (imx == NULL)
- return -ENODEV;
- return pwmchip_remove(&imx->chip);
- }
- static struct platform_driver imx_pwm_driver = {
- .driver = {
- .name = "imx-pwm",
- .of_match_table = imx_pwm_dt_ids,
- },
- .probe = imx_pwm_probe,
- .remove = imx_pwm_remove,
- };
- module_platform_driver(imx_pwm_driver);
- MODULE_LICENSE("GPL v2");
- MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
|