123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547 |
- /*
- * Linux ARCnet driver - COM20020 PCI support
- * Contemporary Controls PCI20 and SOHARD SH-ARC PCI
- *
- * Written 1994-1999 by Avery Pennarun,
- * based on an ISA version by David Woodhouse.
- * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
- * Derived from skeleton.c by Donald Becker.
- *
- * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
- * for sponsoring the further development of this driver.
- *
- * **********************
- *
- * The original copyright of skeleton.c was as follows:
- *
- * skeleton.c Written 1993 by Donald Becker.
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency. This software may only be used
- * and distributed according to the terms of the GNU General Public License as
- * modified by SRC, incorporated herein by reference.
- *
- * **********************
- *
- * For more details, see drivers/net/arcnet.c
- *
- * **********************
- */
- #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
- #include <linux/module.h>
- #include <linux/moduleparam.h>
- #include <linux/kernel.h>
- #include <linux/types.h>
- #include <linux/ioport.h>
- #include <linux/errno.h>
- #include <linux/netdevice.h>
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/pci.h>
- #include <linux/list.h>
- #include <linux/io.h>
- #include <linux/leds.h>
- #include "arcdevice.h"
- #include "com20020.h"
- /* Module parameters */
- static int node;
- static char device[9]; /* use eg. device="arc1" to change name */
- static int timeout = 3;
- static int backplane;
- static int clockp;
- static int clockm;
- module_param(node, int, 0);
- module_param_string(device, device, sizeof(device), 0);
- module_param(timeout, int, 0);
- module_param(backplane, int, 0);
- module_param(clockp, int, 0);
- module_param(clockm, int, 0);
- MODULE_LICENSE("GPL");
- static void led_tx_set(struct led_classdev *led_cdev,
- enum led_brightness value)
- {
- struct com20020_dev *card;
- struct com20020_priv *priv;
- struct com20020_pci_card_info *ci;
- card = container_of(led_cdev, struct com20020_dev, tx_led);
- priv = card->pci_priv;
- ci = priv->ci;
- outb(!!value, priv->misc + ci->leds[card->index].green);
- }
- static void led_recon_set(struct led_classdev *led_cdev,
- enum led_brightness value)
- {
- struct com20020_dev *card;
- struct com20020_priv *priv;
- struct com20020_pci_card_info *ci;
- card = container_of(led_cdev, struct com20020_dev, recon_led);
- priv = card->pci_priv;
- ci = priv->ci;
- outb(!!value, priv->misc + ci->leds[card->index].red);
- }
- static void com20020pci_remove(struct pci_dev *pdev);
- static int com20020pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
- {
- struct com20020_pci_card_info *ci;
- struct com20020_pci_channel_map *mm;
- struct net_device *dev;
- struct arcnet_local *lp;
- struct com20020_priv *priv;
- int i, ioaddr, ret;
- struct resource *r;
- if (pci_enable_device(pdev))
- return -EIO;
- priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv),
- GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- ci = (struct com20020_pci_card_info *)id->driver_data;
- priv->ci = ci;
- mm = &ci->misc_map;
- INIT_LIST_HEAD(&priv->list_dev);
- if (mm->size) {
- ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset;
- r = devm_request_region(&pdev->dev, ioaddr, mm->size,
- "com20020-pci");
- if (!r) {
- pr_err("IO region %xh-%xh already allocated.\n",
- ioaddr, ioaddr + mm->size - 1);
- return -EBUSY;
- }
- priv->misc = ioaddr;
- }
- for (i = 0; i < ci->devcount; i++) {
- struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
- struct com20020_dev *card;
- dev = alloc_arcdev(device);
- if (!dev) {
- ret = -ENOMEM;
- goto out_port;
- }
- dev->dev_port = i;
- dev->netdev_ops = &com20020_netdev_ops;
- lp = netdev_priv(dev);
- arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name);
- ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
- r = devm_request_region(&pdev->dev, ioaddr, cm->size,
- "com20020-pci");
- if (!r) {
- pr_err("IO region %xh-%xh already allocated\n",
- ioaddr, ioaddr + cm->size - 1);
- ret = -EBUSY;
- goto out_port;
- }
- /* Dummy access after Reset
- * ARCNET controller needs
- * this access to detect bustype
- */
- arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND);
- arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT);
- dev->base_addr = ioaddr;
- dev->dev_addr[0] = node;
- dev->irq = pdev->irq;
- lp->card_name = "PCI COM20020";
- lp->card_flags = ci->flags;
- lp->backplane = backplane;
- lp->clockp = clockp & 7;
- lp->clockm = clockm & 3;
- lp->timeout = timeout;
- lp->hw.owner = THIS_MODULE;
- /* Get the dev_id from the PLX rotary coder */
- if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15))
- dev->dev_id = 0xc;
- dev->dev_id ^= inb(priv->misc + ci->rotary) >> 4;
- snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
- if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
- pr_err("IO address %Xh is empty!\n", ioaddr);
- ret = -EIO;
- goto out_port;
- }
- if (com20020_check(dev)) {
- ret = -EIO;
- goto out_port;
- }
- card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
- GFP_KERNEL);
- if (!card)
- return -ENOMEM;
- card->index = i;
- card->pci_priv = priv;
- card->tx_led.brightness_set = led_tx_set;
- card->tx_led.default_trigger = devm_kasprintf(&pdev->dev,
- GFP_KERNEL, "arc%d-%d-tx",
- dev->dev_id, i);
- card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
- "pci:green:tx:%d-%d",
- dev->dev_id, i);
- card->tx_led.dev = &dev->dev;
- card->recon_led.brightness_set = led_recon_set;
- card->recon_led.default_trigger = devm_kasprintf(&pdev->dev,
- GFP_KERNEL, "arc%d-%d-recon",
- dev->dev_id, i);
- card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
- "pci:red:recon:%d-%d",
- dev->dev_id, i);
- card->recon_led.dev = &dev->dev;
- card->dev = dev;
- ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
- if (ret)
- goto out_port;
- ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
- if (ret)
- goto out_port;
- dev_set_drvdata(&dev->dev, card);
- ret = com20020_found(dev, IRQF_SHARED);
- if (ret)
- goto out_port;
- devm_arcnet_led_init(dev, dev->dev_id, i);
- list_add(&card->list, &priv->list_dev);
- }
- pci_set_drvdata(pdev, priv);
- return 0;
- out_port:
- com20020pci_remove(pdev);
- return ret;
- }
- static void com20020pci_remove(struct pci_dev *pdev)
- {
- struct com20020_dev *card, *tmpcard;
- struct com20020_priv *priv;
- priv = pci_get_drvdata(pdev);
- list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) {
- struct net_device *dev = card->dev;
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- free_netdev(dev);
- }
- }
- static struct com20020_pci_card_info card_info_10mbit = {
- .name = "ARC-PCI",
- .devcount = 1,
- .chan_map_tbl = {
- {
- .bar = 2,
- .offset = 0x00,
- .size = 0x08,
- },
- },
- .flags = ARC_CAN_10MBIT,
- };
- static struct com20020_pci_card_info card_info_5mbit = {
- .name = "ARC-PCI",
- .devcount = 1,
- .chan_map_tbl = {
- {
- .bar = 2,
- .offset = 0x00,
- .size = 0x08,
- },
- },
- .flags = ARC_IS_5MBIT,
- };
- static struct com20020_pci_card_info card_info_sohard = {
- .name = "PLX-PCI",
- .devcount = 1,
- /* SOHARD needs PCI base addr 4 */
- .chan_map_tbl = {
- {
- .bar = 4,
- .offset = 0x00,
- .size = 0x08
- },
- },
- .flags = ARC_CAN_10MBIT,
- };
- static struct com20020_pci_card_info card_info_eae_arc1 = {
- .name = "EAE PLX-PCI ARC1",
- .devcount = 1,
- .chan_map_tbl = {
- {
- .bar = 2,
- .offset = 0x00,
- .size = 0x08,
- },
- },
- .misc_map = {
- .bar = 2,
- .offset = 0x10,
- .size = 0x04,
- },
- .leds = {
- {
- .green = 0x0,
- .red = 0x1,
- },
- },
- .rotary = 0x0,
- .flags = ARC_CAN_10MBIT,
- };
- static struct com20020_pci_card_info card_info_eae_ma1 = {
- .name = "EAE PLX-PCI MA1",
- .devcount = 2,
- .chan_map_tbl = {
- {
- .bar = 2,
- .offset = 0x00,
- .size = 0x08,
- }, {
- .bar = 2,
- .offset = 0x08,
- .size = 0x08,
- }
- },
- .misc_map = {
- .bar = 2,
- .offset = 0x10,
- .size = 0x04,
- },
- .leds = {
- {
- .green = 0x0,
- .red = 0x1,
- }, {
- .green = 0x2,
- .red = 0x3,
- },
- },
- .rotary = 0x0,
- .flags = ARC_CAN_10MBIT,
- };
- static const struct pci_device_id com20020pci_id_table[] = {
- {
- 0x1571, 0xa001,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0,
- },
- {
- 0x1571, 0xa002,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0,
- },
- {
- 0x1571, 0xa003,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0
- },
- {
- 0x1571, 0xa004,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0,
- },
- {
- 0x1571, 0xa005,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0
- },
- {
- 0x1571, 0xa006,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0
- },
- {
- 0x1571, 0xa007,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0
- },
- {
- 0x1571, 0xa008,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- 0
- },
- {
- 0x1571, 0xa009,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_5mbit
- },
- {
- 0x1571, 0xa00a,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_5mbit
- },
- {
- 0x1571, 0xa00b,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_5mbit
- },
- {
- 0x1571, 0xa00c,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_5mbit
- },
- {
- 0x1571, 0xa00d,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_5mbit
- },
- {
- 0x1571, 0xa00e,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_5mbit
- },
- {
- 0x1571, 0xa201,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- {
- 0x1571, 0xa202,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- {
- 0x1571, 0xa203,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- {
- 0x1571, 0xa204,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- {
- 0x1571, 0xa205,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- {
- 0x1571, 0xa206,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- {
- 0x10B5, 0x9030,
- 0x10B5, 0x2978,
- 0, 0,
- (kernel_ulong_t)&card_info_sohard
- },
- {
- 0x10B5, 0x9050,
- 0x10B5, 0x2273,
- 0, 0,
- (kernel_ulong_t)&card_info_sohard
- },
- {
- 0x10B5, 0x9050,
- 0x10B5, 0x3263,
- 0, 0,
- (kernel_ulong_t)&card_info_eae_arc1
- },
- {
- 0x10B5, 0x9050,
- 0x10B5, 0x3292,
- 0, 0,
- (kernel_ulong_t)&card_info_eae_ma1
- },
- {
- 0x14BA, 0x6000,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- {
- 0x10B5, 0x2200,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0,
- (kernel_ulong_t)&card_info_10mbit
- },
- { 0, }
- };
- MODULE_DEVICE_TABLE(pci, com20020pci_id_table);
- static struct pci_driver com20020pci_driver = {
- .name = "com20020",
- .id_table = com20020pci_id_table,
- .probe = com20020pci_probe,
- .remove = com20020pci_remove,
- };
- static int __init com20020pci_init(void)
- {
- if (BUGLVL(D_NORMAL))
- pr_info("%s\n", "COM20020 PCI support");
- return pci_register_driver(&com20020pci_driver);
- }
- static void __exit com20020pci_cleanup(void)
- {
- pci_unregister_driver(&com20020pci_driver);
- }
- module_init(com20020pci_init)
- module_exit(com20020pci_cleanup)
|