123456789101112131415161718192021222324252627282930313233343536373839404142 |
- * MTK MMC controller
- The MTK MSDC can act as a MMC controller
- to support MMC, SD, and SDIO types of memory cards.
- This file documents differences between the core properties in mmc.txt
- and the properties used by the msdc driver.
- Required properties:
- - compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
- - interrupts: Should contain MSDC interrupt number
- - clocks: MSDC source clock, HCLK
- - clock-names: "source", "hclk"
- - pinctrl-names: should be "default", "state_uhs"
- - pinctrl-0: should contain default/high speed pin ctrl
- - pinctrl-1: should contain uhs mode pin ctrl
- - vmmc-supply: power to the Core
- - vqmmc-supply: power to the IO
- Optional properties:
- - assigned-clocks: PLL of the source clock
- - assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
- - hs400-ds-delay: HS400 DS delay setting
- Examples:
- mmc0: mmc@11230000 {
- compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
- reg = <0 0x11230000 0 0x108>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
- vmmc-supply = <&mt6397_vemc_3v3_reg>;
- vqmmc-supply = <&mt6397_vio18_reg>;
- clocks = <&pericfg CLK_PERI_MSDC30_0>,
- <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
- clock-names = "source", "hclk";
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&mmc0_pins_default>;
- pinctrl-1 = <&mmc0_pins_uhs>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
- hs400-ds-delay = <0x14015>;
- };
|