| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667 |
- * Rockchip RK3xxx I2C controller
- This driver interfaces with the native I2C controller present in Rockchip
- RK3xxx SoCs.
- Required properties :
- - reg : Offset and length of the register set for the device
- - compatible: should be one of the following:
- - "rockchip,rk3066-i2c": for rk3066
- - "rockchip,rk3188-i2c": for rk3188
- - "rockchip,rk3228-i2c": for rk3228
- - "rockchip,rk3288-i2c": for rk3288
- - "rockchip,rk3399-i2c": for rk3399
- - interrupts : interrupt number
- - clocks: See ../clock/clock-bindings.txt
- - For older hardware (rk3066, rk3188, rk3228, rk3288):
- - There is one clock that's used both to derive the functional clock
- for the device and as the bus clock.
- - For newer hardware (rk3399): specified by name
- - "i2c": This is used to derive the functional clock.
- - "pclk": This is the bus clock.
- Required on RK3066, RK3188 :
- - rockchip,grf : the phandle of the syscon node for the general register
- file (GRF)
- - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
- is also required.
- Optional properties :
- - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
- - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
- (t(r) in I2C specification). If not specified this is assumed to be
- the maximum the specification allows(1000 ns for Standard-mode,
- 300 ns for Fast-mode) which might cause slightly slower communication.
- - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
- (t(f) in the I2C specification). If not specified this is assumed to
- be the maximum the specification allows (300 ns) which might cause
- slightly slower communication.
- - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
- (t(f) in the I2C specification). If not specified we'll use the SCL
- value since they are the same in nearly all cases.
- Example:
- aliases {
- i2c0 = &i2c0;
- }
- i2c0: i2c@2002d000 {
- compatible = "rockchip,rk3188-i2c";
- reg = <0x2002d000 0x1000>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- rockchip,grf = <&grf>;
- clock-names = "i2c";
- clocks = <&cru PCLK_I2C0>;
- i2c-scl-rising-time-ns = <800>;
- i2c-scl-falling-time-ns = <100>;
- };
|
