ufshci.h 12 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413
  1. /*
  2. * Universal Flash Storage Host controller driver
  3. *
  4. * This code is based on drivers/scsi/ufs/ufshci.h
  5. * Copyright (C) 2011-2013 Samsung India Software Operations
  6. *
  7. * Authors:
  8. * Santosh Yaraganavi <santosh.sy@samsung.com>
  9. * Vinayak Holikatti <h.vinayak@samsung.com>
  10. *
  11. * This program is free software; you can redistribute it and/or
  12. * modify it under the terms of the GNU General Public License
  13. * as published by the Free Software Foundation; either version 2
  14. * of the License, or (at your option) any later version.
  15. * See the COPYING file in the top-level directory or visit
  16. * <http://www.gnu.org/licenses/gpl-2.0.html>
  17. *
  18. * This program is distributed in the hope that it will be useful,
  19. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  21. * GNU General Public License for more details.
  22. *
  23. * This program is provided "AS IS" and "WITH ALL FAULTS" and
  24. * without warranty of any kind. You are solely responsible for
  25. * determining the appropriateness of using and distributing
  26. * the program and assume all risks associated with your exercise
  27. * of rights with respect to the program, including but not limited
  28. * to infringement of third party rights, the risks and costs of
  29. * program errors, damage to or loss of data, programs or equipment,
  30. * and unavailability or interruption of operations. Under no
  31. * circumstances will the contributor of this Program be liable for
  32. * any damages of any kind arising from your use or distribution of
  33. * this program.
  34. */
  35. #ifndef _UFSHCI_H
  36. #define _UFSHCI_H
  37. enum {
  38. TASK_REQ_UPIU_SIZE_DWORDS = 8,
  39. TASK_RSP_UPIU_SIZE_DWORDS = 8,
  40. ALIGNED_UPIU_SIZE = 512,
  41. };
  42. /* UFSHCI Registers */
  43. enum {
  44. REG_CONTROLLER_CAPABILITIES = 0x00,
  45. REG_UFS_VERSION = 0x08,
  46. REG_CONTROLLER_DEV_ID = 0x10,
  47. REG_CONTROLLER_PROD_ID = 0x14,
  48. REG_INTERRUPT_STATUS = 0x20,
  49. REG_INTERRUPT_ENABLE = 0x24,
  50. REG_CONTROLLER_STATUS = 0x30,
  51. REG_CONTROLLER_ENABLE = 0x34,
  52. REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
  53. REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
  54. REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
  55. REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
  56. REG_UIC_ERROR_CODE_DME = 0x48,
  57. REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
  58. REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
  59. REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
  60. REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
  61. REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
  62. REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
  63. REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
  64. REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
  65. REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
  66. REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
  67. REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
  68. REG_UIC_COMMAND = 0x90,
  69. REG_UIC_COMMAND_ARG_1 = 0x94,
  70. REG_UIC_COMMAND_ARG_2 = 0x98,
  71. REG_UIC_COMMAND_ARG_3 = 0x9C,
  72. };
  73. /* Controller capability masks */
  74. enum {
  75. MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
  76. MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
  77. MASK_64_ADDRESSING_SUPPORT = 0x01000000,
  78. MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
  79. MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
  80. };
  81. /* UFS Version 08h */
  82. #define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
  83. #define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
  84. /* Controller UFSHCI version */
  85. enum {
  86. UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */
  87. UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
  88. UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
  89. UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
  90. };
  91. /*
  92. * HCDDID - Host Controller Identification Descriptor
  93. * - Device ID and Device Class 10h
  94. */
  95. #define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
  96. #define DEVICE_ID UFS_MASK(0xFF, 24)
  97. /*
  98. * HCPMID - Host Controller Identification Descriptor
  99. * - Product/Manufacturer ID 14h
  100. */
  101. #define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
  102. #define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
  103. #define UFS_BIT(x) (1L << (x))
  104. #define UTP_TRANSFER_REQ_COMPL UFS_BIT(0)
  105. #define UIC_DME_END_PT_RESET UFS_BIT(1)
  106. #define UIC_ERROR UFS_BIT(2)
  107. #define UIC_TEST_MODE UFS_BIT(3)
  108. #define UIC_POWER_MODE UFS_BIT(4)
  109. #define UIC_HIBERNATE_EXIT UFS_BIT(5)
  110. #define UIC_HIBERNATE_ENTER UFS_BIT(6)
  111. #define UIC_LINK_LOST UFS_BIT(7)
  112. #define UIC_LINK_STARTUP UFS_BIT(8)
  113. #define UTP_TASK_REQ_COMPL UFS_BIT(9)
  114. #define UIC_COMMAND_COMPL UFS_BIT(10)
  115. #define DEVICE_FATAL_ERROR UFS_BIT(11)
  116. #define CONTROLLER_FATAL_ERROR UFS_BIT(16)
  117. #define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
  118. #define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\
  119. UIC_HIBERNATE_EXIT |\
  120. UIC_POWER_MODE)
  121. #define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
  122. #define UFSHCD_ERROR_MASK (UIC_ERROR |\
  123. DEVICE_FATAL_ERROR |\
  124. CONTROLLER_FATAL_ERROR |\
  125. SYSTEM_BUS_FATAL_ERROR)
  126. #define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
  127. CONTROLLER_FATAL_ERROR |\
  128. SYSTEM_BUS_FATAL_ERROR)
  129. /* HCS - Host Controller Status 30h */
  130. #define DEVICE_PRESENT UFS_BIT(0)
  131. #define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1)
  132. #define UTP_TASK_REQ_LIST_READY UFS_BIT(2)
  133. #define UIC_COMMAND_READY UFS_BIT(3)
  134. #define HOST_ERROR_INDICATOR UFS_BIT(4)
  135. #define DEVICE_ERROR_INDICATOR UFS_BIT(5)
  136. #define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
  137. enum {
  138. PWR_OK = 0x0,
  139. PWR_LOCAL = 0x01,
  140. PWR_REMOTE = 0x02,
  141. PWR_BUSY = 0x03,
  142. PWR_ERROR_CAP = 0x04,
  143. PWR_FATAL_ERROR = 0x05,
  144. };
  145. /* HCE - Host Controller Enable 34h */
  146. #define CONTROLLER_ENABLE UFS_BIT(0)
  147. #define CONTROLLER_DISABLE 0x0
  148. /* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
  149. #define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31)
  150. #define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
  151. /* UECDL - Host UIC Error Code Data Link Layer 3Ch */
  152. #define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
  153. #define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
  154. #define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
  155. #define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
  156. #define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
  157. /* UECN - Host UIC Error Code Network Layer 40h */
  158. #define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
  159. #define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
  160. /* UECT - Host UIC Error Code Transport Layer 44h */
  161. #define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
  162. #define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
  163. /* UECDME - Host UIC Error Code DME 48h */
  164. #define UIC_DME_ERROR UFS_BIT(31)
  165. #define UIC_DME_ERROR_CODE_MASK 0x1
  166. #define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
  167. #define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
  168. #define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16)
  169. #define INT_AGGR_STATUS_BIT UFS_BIT(20)
  170. #define INT_AGGR_PARAM_WRITE UFS_BIT(24)
  171. #define INT_AGGR_ENABLE UFS_BIT(31)
  172. /* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
  173. #define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
  174. /* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
  175. #define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
  176. /* UICCMD - UIC Command */
  177. #define COMMAND_OPCODE_MASK 0xFF
  178. #define GEN_SELECTOR_INDEX_MASK 0xFFFF
  179. #define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
  180. #define RESET_LEVEL 0xFF
  181. #define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
  182. #define CONFIG_RESULT_CODE_MASK 0xFF
  183. #define GENERIC_ERROR_CODE_MASK 0xFF
  184. /* GenSelectorIndex calculation macros for M-PHY attributes */
  185. #define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
  186. #define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
  187. #define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
  188. ((sel) & 0xFFFF))
  189. #define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
  190. #define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
  191. #define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
  192. /* Link Status*/
  193. enum link_status {
  194. UFSHCD_LINK_IS_DOWN = 1,
  195. UFSHCD_LINK_IS_UP = 2,
  196. };
  197. /* UIC Commands */
  198. enum uic_cmd_dme {
  199. UIC_CMD_DME_GET = 0x01,
  200. UIC_CMD_DME_SET = 0x02,
  201. UIC_CMD_DME_PEER_GET = 0x03,
  202. UIC_CMD_DME_PEER_SET = 0x04,
  203. UIC_CMD_DME_POWERON = 0x10,
  204. UIC_CMD_DME_POWEROFF = 0x11,
  205. UIC_CMD_DME_ENABLE = 0x12,
  206. UIC_CMD_DME_RESET = 0x14,
  207. UIC_CMD_DME_END_PT_RST = 0x15,
  208. UIC_CMD_DME_LINK_STARTUP = 0x16,
  209. UIC_CMD_DME_HIBER_ENTER = 0x17,
  210. UIC_CMD_DME_HIBER_EXIT = 0x18,
  211. UIC_CMD_DME_TEST_MODE = 0x1A,
  212. };
  213. /* UIC Config result code / Generic error code */
  214. enum {
  215. UIC_CMD_RESULT_SUCCESS = 0x00,
  216. UIC_CMD_RESULT_INVALID_ATTR = 0x01,
  217. UIC_CMD_RESULT_FAILURE = 0x01,
  218. UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
  219. UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
  220. UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
  221. UIC_CMD_RESULT_BAD_INDEX = 0x05,
  222. UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
  223. UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
  224. UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
  225. UIC_CMD_RESULT_BUSY = 0x09,
  226. UIC_CMD_RESULT_DME_FAILURE = 0x0A,
  227. };
  228. #define MASK_UIC_COMMAND_RESULT 0xFF
  229. #define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8)
  230. #define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0)
  231. /* Interrupt disable masks */
  232. enum {
  233. /* Interrupt disable mask for UFSHCI v1.0 */
  234. INTERRUPT_MASK_ALL_VER_10 = 0x30FFF,
  235. INTERRUPT_MASK_RW_VER_10 = 0x30000,
  236. /* Interrupt disable mask for UFSHCI v1.1 */
  237. INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
  238. };
  239. /*
  240. * Request Descriptor Definitions
  241. */
  242. /* Transfer request command type */
  243. enum {
  244. UTP_CMD_TYPE_SCSI = 0x0,
  245. UTP_CMD_TYPE_UFS = 0x1,
  246. UTP_CMD_TYPE_DEV_MANAGE = 0x2,
  247. };
  248. /* To accommodate UFS2.0 required Command type */
  249. enum {
  250. UTP_CMD_TYPE_UFS_STORAGE = 0x1,
  251. };
  252. enum {
  253. UTP_SCSI_COMMAND = 0x00000000,
  254. UTP_NATIVE_UFS_COMMAND = 0x10000000,
  255. UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
  256. UTP_REQ_DESC_INT_CMD = 0x01000000,
  257. };
  258. /* UTP Transfer Request Data Direction (DD) */
  259. enum {
  260. UTP_NO_DATA_TRANSFER = 0x00000000,
  261. UTP_HOST_TO_DEVICE = 0x02000000,
  262. UTP_DEVICE_TO_HOST = 0x04000000,
  263. };
  264. /* Overall command status values */
  265. enum {
  266. OCS_SUCCESS = 0x0,
  267. OCS_INVALID_CMD_TABLE_ATTR = 0x1,
  268. OCS_INVALID_PRDT_ATTR = 0x2,
  269. OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
  270. OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
  271. OCS_PEER_COMM_FAILURE = 0x5,
  272. OCS_ABORTED = 0x6,
  273. OCS_FATAL_ERROR = 0x7,
  274. OCS_INVALID_COMMAND_STATUS = 0x0F,
  275. MASK_OCS = 0x0F,
  276. };
  277. /* The maximum length of the data byte count field in the PRDT is 256KB */
  278. #define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024)
  279. /* The granularity of the data byte count field in the PRDT is 32-bit */
  280. #define PRDT_DATA_BYTE_COUNT_PAD 4
  281. /**
  282. * struct ufshcd_sg_entry - UFSHCI PRD Entry
  283. * @base_addr: Lower 32bit physical address DW-0
  284. * @upper_addr: Upper 32bit physical address DW-1
  285. * @reserved: Reserved for future use DW-2
  286. * @size: size of physical segment DW-3
  287. */
  288. struct ufshcd_sg_entry {
  289. __le32 base_addr;
  290. __le32 upper_addr;
  291. __le32 reserved;
  292. __le32 size;
  293. };
  294. /**
  295. * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
  296. * @command_upiu: Command UPIU Frame address
  297. * @response_upiu: Response UPIU Frame address
  298. * @prd_table: Physical Region Descriptor
  299. */
  300. struct utp_transfer_cmd_desc {
  301. u8 command_upiu[ALIGNED_UPIU_SIZE];
  302. u8 response_upiu[ALIGNED_UPIU_SIZE];
  303. struct ufshcd_sg_entry prd_table[SG_ALL];
  304. };
  305. /**
  306. * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
  307. * @dword0: Descriptor Header DW0
  308. * @dword1: Descriptor Header DW1
  309. * @dword2: Descriptor Header DW2
  310. * @dword3: Descriptor Header DW3
  311. */
  312. struct request_desc_header {
  313. __le32 dword_0;
  314. __le32 dword_1;
  315. __le32 dword_2;
  316. __le32 dword_3;
  317. };
  318. /**
  319. * struct utp_transfer_req_desc - UTRD structure
  320. * @header: UTRD header DW-0 to DW-3
  321. * @command_desc_base_addr_lo: UCD base address low DW-4
  322. * @command_desc_base_addr_hi: UCD base address high DW-5
  323. * @response_upiu_length: response UPIU length DW-6
  324. * @response_upiu_offset: response UPIU offset DW-6
  325. * @prd_table_length: Physical region descriptor length DW-7
  326. * @prd_table_offset: Physical region descriptor offset DW-7
  327. */
  328. struct utp_transfer_req_desc {
  329. /* DW 0-3 */
  330. struct request_desc_header header;
  331. /* DW 4-5*/
  332. __le32 command_desc_base_addr_lo;
  333. __le32 command_desc_base_addr_hi;
  334. /* DW 6 */
  335. __le16 response_upiu_length;
  336. __le16 response_upiu_offset;
  337. /* DW 7 */
  338. __le16 prd_table_length;
  339. __le16 prd_table_offset;
  340. };
  341. /**
  342. * struct utp_task_req_desc - UTMRD structure
  343. * @header: UTMRD header DW-0 to DW-3
  344. * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
  345. * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
  346. */
  347. struct utp_task_req_desc {
  348. /* DW 0-3 */
  349. struct request_desc_header header;
  350. /* DW 4-11 */
  351. __le32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];
  352. /* DW 12-19 */
  353. __le32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
  354. };
  355. #endif /* End of Header */