123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125 |
- /*
- Mantis PCI bridge driver
- Copyright (C) Manu Abraham (abraham.manu@gmail.com)
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- #include <linux/kernel.h>
- #include <linux/i2c.h>
- #include <linux/signal.h>
- #include <linux/sched.h>
- #include <linux/interrupt.h>
- #include <asm/io.h>
- #include "dmxdev.h"
- #include "dvbdev.h"
- #include "dvb_demux.h"
- #include "dvb_frontend.h"
- #include "dvb_net.h"
- #include "mantis_common.h"
- #include "mantis_reg.h"
- #include "mantis_ioc.h"
- static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
- {
- struct i2c_adapter *adapter = &mantis->adapter;
- int err;
- u8 buf = reg;
- struct i2c_msg msg[] = {
- { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
- { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
- };
- err = i2c_transfer(adapter, msg, 2);
- if (err < 0) {
- dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
- err, data[0], data[1]);
- return err;
- }
- return 0;
- }
- int mantis_get_mac(struct mantis_pci *mantis)
- {
- int err;
- u8 mac_addr[6] = {0};
- err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
- if (err < 0) {
- dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
- return err;
- }
- dprintk(MANTIS_ERROR, 0, " MAC Address=[%pM]\n", mac_addr);
- return 0;
- }
- EXPORT_SYMBOL_GPL(mantis_get_mac);
- /* Turn the given bit on or off. */
- void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
- {
- u32 cur;
- dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
- cur = mmread(MANTIS_GPIF_ADDR);
- if (value)
- mantis->gpio_status = cur | (1 << bitpos);
- else
- mantis->gpio_status = cur & (~(1 << bitpos));
- dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
- mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
- mmwrite(0x00, MANTIS_GPIF_DOUT);
- }
- EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
- int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
- {
- u32 reg;
- reg = mmread(MANTIS_CONTROL);
- switch (stream_ctl) {
- case STREAM_TO_HIF:
- dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
- reg &= 0xff - MANTIS_BYPASS;
- mmwrite(reg, MANTIS_CONTROL);
- reg |= MANTIS_BYPASS;
- mmwrite(reg, MANTIS_CONTROL);
- break;
- case STREAM_TO_CAM:
- dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
- reg |= MANTIS_BYPASS;
- mmwrite(reg, MANTIS_CONTROL);
- reg &= 0xff - MANTIS_BYPASS;
- mmwrite(reg, MANTIS_CONTROL);
- break;
- default:
- dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
- return -1;
- }
- return 0;
- }
- EXPORT_SYMBOL_GPL(mantis_stream_control);
|