123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285 |
- /*
- * APM X-Gene SLIMpro MailBox Driver
- *
- * Copyright (c) 2015, Applied Micro Circuits Corporation
- * Author: Feng Kan fkan@apm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- */
- #include <linux/acpi.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/io.h>
- #include <linux/mailbox_controller.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/spinlock.h>
- #define MBOX_CON_NAME "slimpro-mbox"
- #define MBOX_REG_SET_OFFSET 0x1000
- #define MBOX_CNT 8
- #define MBOX_STATUS_AVAIL_MASK BIT(16)
- #define MBOX_STATUS_ACK_MASK BIT(0)
- /* Configuration and Status Registers */
- #define REG_DB_IN 0x00
- #define REG_DB_DIN0 0x04
- #define REG_DB_DIN1 0x08
- #define REG_DB_OUT 0x10
- #define REG_DB_DOUT0 0x14
- #define REG_DB_DOUT1 0x18
- #define REG_DB_STAT 0x20
- #define REG_DB_STATMASK 0x24
- /**
- * X-Gene SlimPRO mailbox channel information
- *
- * @dev: Device to which it is attached
- * @chan: Pointer to mailbox communication channel
- * @reg: Base address to access channel registers
- * @irq: Interrupt number of the channel
- * @rx_msg: Received message storage
- */
- struct slimpro_mbox_chan {
- struct device *dev;
- struct mbox_chan *chan;
- void __iomem *reg;
- int irq;
- u32 rx_msg[3];
- };
- /**
- * X-Gene SlimPRO Mailbox controller data
- *
- * X-Gene SlimPRO Mailbox controller has 8 commnunication channels.
- * Each channel has a separate IRQ number assgined to it.
- *
- * @mb_ctrl: Representation of the commnunication channel controller
- * @mc: Array of SlimPRO mailbox channels of the controller
- * @chans: Array of mailbox communication channels
- *
- */
- struct slimpro_mbox {
- struct mbox_controller mb_ctrl;
- struct slimpro_mbox_chan mc[MBOX_CNT];
- struct mbox_chan chans[MBOX_CNT];
- };
- static void mb_chan_send_msg(struct slimpro_mbox_chan *mb_chan, u32 *msg)
- {
- writel(msg[1], mb_chan->reg + REG_DB_DOUT0);
- writel(msg[2], mb_chan->reg + REG_DB_DOUT1);
- writel(msg[0], mb_chan->reg + REG_DB_OUT);
- }
- static void mb_chan_recv_msg(struct slimpro_mbox_chan *mb_chan)
- {
- mb_chan->rx_msg[1] = readl(mb_chan->reg + REG_DB_DIN0);
- mb_chan->rx_msg[2] = readl(mb_chan->reg + REG_DB_DIN1);
- mb_chan->rx_msg[0] = readl(mb_chan->reg + REG_DB_IN);
- }
- static int mb_chan_status_ack(struct slimpro_mbox_chan *mb_chan)
- {
- u32 val = readl(mb_chan->reg + REG_DB_STAT);
- if (val & MBOX_STATUS_ACK_MASK) {
- writel(MBOX_STATUS_ACK_MASK, mb_chan->reg + REG_DB_STAT);
- return 1;
- }
- return 0;
- }
- static int mb_chan_status_avail(struct slimpro_mbox_chan *mb_chan)
- {
- u32 val = readl(mb_chan->reg + REG_DB_STAT);
- if (val & MBOX_STATUS_AVAIL_MASK) {
- mb_chan_recv_msg(mb_chan);
- writel(MBOX_STATUS_AVAIL_MASK, mb_chan->reg + REG_DB_STAT);
- return 1;
- }
- return 0;
- }
- static irqreturn_t slimpro_mbox_irq(int irq, void *id)
- {
- struct slimpro_mbox_chan *mb_chan = id;
- if (mb_chan_status_ack(mb_chan))
- mbox_chan_txdone(mb_chan->chan, 0);
- if (mb_chan_status_avail(mb_chan))
- mbox_chan_received_data(mb_chan->chan, mb_chan->rx_msg);
- return IRQ_HANDLED;
- }
- static int slimpro_mbox_send_data(struct mbox_chan *chan, void *msg)
- {
- struct slimpro_mbox_chan *mb_chan = chan->con_priv;
- mb_chan_send_msg(mb_chan, msg);
- return 0;
- }
- static int slimpro_mbox_startup(struct mbox_chan *chan)
- {
- struct slimpro_mbox_chan *mb_chan = chan->con_priv;
- int rc;
- u32 val;
- rc = devm_request_irq(mb_chan->dev, mb_chan->irq, slimpro_mbox_irq, 0,
- MBOX_CON_NAME, mb_chan);
- if (unlikely(rc)) {
- dev_err(mb_chan->dev, "failed to register mailbox interrupt %d\n",
- mb_chan->irq);
- return rc;
- }
- /* Enable HW interrupt */
- writel(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK,
- mb_chan->reg + REG_DB_STAT);
- /* Unmask doorbell status interrupt */
- val = readl(mb_chan->reg + REG_DB_STATMASK);
- val &= ~(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
- writel(val, mb_chan->reg + REG_DB_STATMASK);
- return 0;
- }
- static void slimpro_mbox_shutdown(struct mbox_chan *chan)
- {
- struct slimpro_mbox_chan *mb_chan = chan->con_priv;
- u32 val;
- /* Mask doorbell status interrupt */
- val = readl(mb_chan->reg + REG_DB_STATMASK);
- val |= (MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
- writel(val, mb_chan->reg + REG_DB_STATMASK);
- devm_free_irq(mb_chan->dev, mb_chan->irq, mb_chan);
- }
- static struct mbox_chan_ops slimpro_mbox_ops = {
- .send_data = slimpro_mbox_send_data,
- .startup = slimpro_mbox_startup,
- .shutdown = slimpro_mbox_shutdown,
- };
- static int slimpro_mbox_probe(struct platform_device *pdev)
- {
- struct slimpro_mbox *ctx;
- struct resource *regs;
- void __iomem *mb_base;
- int rc;
- int i;
- ctx = devm_kzalloc(&pdev->dev, sizeof(struct slimpro_mbox), GFP_KERNEL);
- if (!ctx)
- return -ENOMEM;
- platform_set_drvdata(pdev, ctx);
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mb_base = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
- if (!mb_base)
- return -ENOMEM;
- /* Setup mailbox links */
- for (i = 0; i < MBOX_CNT; i++) {
- ctx->mc[i].irq = platform_get_irq(pdev, i);
- if (ctx->mc[i].irq < 0) {
- if (i == 0) {
- dev_err(&pdev->dev, "no available IRQ\n");
- return -EINVAL;
- }
- dev_info(&pdev->dev, "no IRQ for channel %d\n", i);
- break;
- }
- ctx->mc[i].dev = &pdev->dev;
- ctx->mc[i].reg = mb_base + i * MBOX_REG_SET_OFFSET;
- ctx->mc[i].chan = &ctx->chans[i];
- ctx->chans[i].con_priv = &ctx->mc[i];
- }
- /* Setup mailbox controller */
- ctx->mb_ctrl.dev = &pdev->dev;
- ctx->mb_ctrl.chans = ctx->chans;
- ctx->mb_ctrl.txdone_irq = true;
- ctx->mb_ctrl.ops = &slimpro_mbox_ops;
- ctx->mb_ctrl.num_chans = i;
- rc = mbox_controller_register(&ctx->mb_ctrl);
- if (rc) {
- dev_err(&pdev->dev,
- "APM X-Gene SLIMpro MailBox register failed:%d\n", rc);
- return rc;
- }
- dev_info(&pdev->dev, "APM X-Gene SLIMpro MailBox registered\n");
- return 0;
- }
- static int slimpro_mbox_remove(struct platform_device *pdev)
- {
- struct slimpro_mbox *smb = platform_get_drvdata(pdev);
- mbox_controller_unregister(&smb->mb_ctrl);
- return 0;
- }
- static const struct of_device_id slimpro_of_match[] = {
- {.compatible = "apm,xgene-slimpro-mbox" },
- { },
- };
- MODULE_DEVICE_TABLE(of, slimpro_of_match);
- #ifdef CONFIG_ACPI
- static const struct acpi_device_id slimpro_acpi_ids[] = {
- {"APMC0D01", 0},
- {}
- };
- MODULE_DEVICE_TABLE(acpi, slimpro_acpi_ids);
- #endif
- static struct platform_driver slimpro_mbox_driver = {
- .probe = slimpro_mbox_probe,
- .remove = slimpro_mbox_remove,
- .driver = {
- .name = "xgene-slimpro-mbox",
- .of_match_table = of_match_ptr(slimpro_of_match),
- .acpi_match_table = ACPI_PTR(slimpro_acpi_ids)
- },
- };
- static int __init slimpro_mbox_init(void)
- {
- return platform_driver_register(&slimpro_mbox_driver);
- }
- static void __exit slimpro_mbox_exit(void)
- {
- platform_driver_unregister(&slimpro_mbox_driver);
- }
- subsys_initcall(slimpro_mbox_init);
- module_exit(slimpro_mbox_exit);
- MODULE_DESCRIPTION("APM X-Gene SLIMpro Mailbox Driver");
- MODULE_LICENSE("GPL");
|