123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199 |
- /*
- *
- * Bluetooth HCI UART driver
- *
- * Copyright (C) 2000-2001 Qualcomm Incorporated
- * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
- * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
- #ifndef N_HCI
- #define N_HCI 15
- #endif
- /* Ioctls */
- #define HCIUARTSETPROTO _IOW('U', 200, int)
- #define HCIUARTGETPROTO _IOR('U', 201, int)
- #define HCIUARTGETDEVICE _IOR('U', 202, int)
- #define HCIUARTSETFLAGS _IOW('U', 203, int)
- #define HCIUARTGETFLAGS _IOR('U', 204, int)
- /* UART protocols */
- #define HCI_UART_MAX_PROTO 12
- #define HCI_UART_H4 0
- #define HCI_UART_BCSP 1
- #define HCI_UART_3WIRE 2
- #define HCI_UART_H4DS 3
- #define HCI_UART_LL 4
- #define HCI_UART_ATH3K 5
- #define HCI_UART_INTEL 6
- #define HCI_UART_BCM 7
- #define HCI_UART_QCA 8
- #define HCI_UART_AG6XX 9
- #define HCI_UART_NOKIA 10
- #define HCI_UART_MRVL 11
- #define HCI_UART_RAW_DEVICE 0
- #define HCI_UART_RESET_ON_INIT 1
- #define HCI_UART_CREATE_AMP 2
- #define HCI_UART_INIT_PENDING 3
- #define HCI_UART_EXT_CONFIG 4
- #define HCI_UART_VND_DETECT 5
- struct hci_uart;
- struct hci_uart_proto {
- unsigned int id;
- const char *name;
- unsigned int manufacturer;
- unsigned int init_speed;
- unsigned int oper_speed;
- int (*open)(struct hci_uart *hu);
- int (*close)(struct hci_uart *hu);
- int (*flush)(struct hci_uart *hu);
- int (*setup)(struct hci_uart *hu);
- int (*set_baudrate)(struct hci_uart *hu, unsigned int speed);
- int (*recv)(struct hci_uart *hu, const void *data, int len);
- int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
- struct sk_buff *(*dequeue)(struct hci_uart *hu);
- };
- struct hci_uart {
- struct tty_struct *tty;
- struct hci_dev *hdev;
- unsigned long flags;
- unsigned long hdev_flags;
- struct work_struct init_ready;
- struct work_struct write_work;
- const struct hci_uart_proto *proto;
- void *priv;
- struct sk_buff *tx_skb;
- unsigned long tx_state;
- unsigned int init_speed;
- unsigned int oper_speed;
- };
- /* HCI_UART proto flag bits */
- #define HCI_UART_PROTO_SET 0
- #define HCI_UART_REGISTERED 1
- #define HCI_UART_PROTO_READY 2
- /* TX states */
- #define HCI_UART_SENDING 1
- #define HCI_UART_TX_WAKEUP 2
- int hci_uart_register_proto(const struct hci_uart_proto *p);
- int hci_uart_unregister_proto(const struct hci_uart_proto *p);
- int hci_uart_tx_wakeup(struct hci_uart *hu);
- int hci_uart_init_ready(struct hci_uart *hu);
- void hci_uart_init_tty(struct hci_uart *hu);
- void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed);
- void hci_uart_set_flow_control(struct hci_uart *hu, bool enable);
- void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
- unsigned int oper_speed);
- #ifdef CONFIG_BT_HCIUART_H4
- int h4_init(void);
- int h4_deinit(void);
- struct h4_recv_pkt {
- u8 type; /* Packet type */
- u8 hlen; /* Header length */
- u8 loff; /* Data length offset in header */
- u8 lsize; /* Data length field size */
- u16 maxlen; /* Max overall packet length */
- int (*recv)(struct hci_dev *hdev, struct sk_buff *skb);
- };
- #define H4_RECV_ACL \
- .type = HCI_ACLDATA_PKT, \
- .hlen = HCI_ACL_HDR_SIZE, \
- .loff = 2, \
- .lsize = 2, \
- .maxlen = HCI_MAX_FRAME_SIZE \
- #define H4_RECV_SCO \
- .type = HCI_SCODATA_PKT, \
- .hlen = HCI_SCO_HDR_SIZE, \
- .loff = 2, \
- .lsize = 1, \
- .maxlen = HCI_MAX_SCO_SIZE
- #define H4_RECV_EVENT \
- .type = HCI_EVENT_PKT, \
- .hlen = HCI_EVENT_HDR_SIZE, \
- .loff = 1, \
- .lsize = 1, \
- .maxlen = HCI_MAX_EVENT_SIZE
- struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
- const unsigned char *buffer, int count,
- const struct h4_recv_pkt *pkts, int pkts_count);
- #endif
- #ifdef CONFIG_BT_HCIUART_BCSP
- int bcsp_init(void);
- int bcsp_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_LL
- int ll_init(void);
- int ll_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_ATH3K
- int ath_init(void);
- int ath_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_3WIRE
- int h5_init(void);
- int h5_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_INTEL
- int intel_init(void);
- int intel_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_BCM
- int bcm_init(void);
- int bcm_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_QCA
- int qca_init(void);
- int qca_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_AG6XX
- int ag6xx_init(void);
- int ag6xx_deinit(void);
- #endif
- #ifdef CONFIG_BT_HCIUART_MRVL
- int mrvl_init(void);
- int mrvl_deinit(void);
- #endif
|