linux-libre/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi

/*
 * P5020/5010 Silicon/SoC Device Tree Source (post include)
 *
 * Copyright 2011 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

&bman_fbpr {
	compatible = "fsl,bman-fbpr";
	alloc-ranges = <0 0 0x10000 0>;
};

&qman_fqd {
	compatible = "fsl,qman-fqd";
	alloc-ranges = <0 0 0x10000 0>;
};

&qman_pfdr {
	compatible = "fsl,qman-pfdr";
	alloc-ranges = <0 0 0x10000 0>;
};

&lbc {
	compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
	interrupts = <25 2 0 0>;
	#address-cells = <2>;
	#size-cells = <1>;
};

/* controller at 0x200000 */
&pci0 {
	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	clock-frequency = <33333333>;
	interrupts = <16 2 1 15>;
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 1 15>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 40 1 0 0
			0000 0 0 2 &mpic 1 1 0 0
			0000 0 0 3 &mpic 2 1 0 0
			0000 0 0 4 &mpic 3 1 0 0
			>;
	};
};

/* controller at 0x201000 */
&pci1 {
	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 0xff>;
	clock-frequency = <33333333>;
	interrupts = <16 2 1 14>;
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 1 14>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 41 1 0 0
			0000 0 0 2 &mpic 5 1 0 0
			0000 0 0 3 &mpic 6 1 0 0
			0000 0 0 4 &mpic 7 1 0 0
			>;
	};
};

/* controller at 0x202000 */
&pci2 {
	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	clock-frequency = <33333333>;
	interrupts = <16 2 1 13>;
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 1 13>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 42 1 0 0
			0000 0 0 2 &mpic 9 1 0 0
			0000 0 0 3 &mpic 10 1 0 0
			0000 0 0 4 &mpic 11 1 0 0
			>;
	};
};

/* controller at 0x203000 */
&pci3 {
	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	clock-frequency = <33333333>;
	interrupts = <16 2 1 12>;
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */
	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 1 12>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 43 1 0 0
			0000 0 0 2 &mpic 0 1 0 0
			0000 0 0 3 &mpic 4 1 0 0
			0000 0 0 4 &mpic 8 1 0 0
			>;
	};
};

&rio {
	compatible = "fsl,srio";
	interrupts = <16 2 1 11>;
	#address-cells = <2>;
	#size-cells = <2>;
	fsl,iommu-parent = <&pamu0>;
	ranges;

	port1 {
		#address-cells = <2>;
		#size-cells = <2>;
		cell-index = <1>;
		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
	};

	port2 {
		#address-cells = <2>;
		#size-cells = <2>;
		cell-index = <2>;
		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
	};
};

&dcsr {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,dcsr", "simple-bus";

	dcsr-epu@0 {
		compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu";
		interrupts = <52 2 0 0
			      84 2 0 0
			      85 2 0 0>;
		reg = <0x0 0x1000>;
	};
	dcsr-npc {
		compatible = "fsl,dcsr-npc";
		reg = <0x1000 0x1000 0x1000000 0x8000>;
	};
	dcsr-nxc@2000 {
		compatible = "fsl,dcsr-nxc";
		reg = <0x2000 0x1000>;
	};
	dcsr-corenet {
		compatible = "fsl,dcsr-corenet";
		reg = <0x8000 0x1000 0xB0000 0x1000>;
	};
	dcsr-dpaa@9000 {
		compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
		reg = <0x9000 0x1000>;
	};
	dcsr-ocn@11000 {
		compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
		reg = <0x11000 0x1000>;
	};
	dcsr-ddr@12000 {
		compatible = "fsl,dcsr-ddr";
		dev-handle = <&ddr1>;
		reg = <0x12000 0x1000>;
	};
	dcsr-ddr@13000 {
		compatible = "fsl,dcsr-ddr";
		dev-handle = <&ddr2>;
		reg = <0x13000 0x1000>;
	};
	dcsr-nal@18000 {
		compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
		reg = <0x18000 0x1000>;
	};
	dcsr-rcpm@22000 {
		compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
		reg = <0x22000 0x1000>;
	};
	dcsr-cpu-sb-proxy@40000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu0>;
		reg = <0x40000 0x1000>;
	};
	dcsr-cpu-sb-proxy@41000 {
		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu1>;
		reg = <0x41000 0x1000>;
	};
};

/include/ "qoriq-bman1-portals.dtsi"

/include/ "qoriq-qman1-portals.dtsi"

&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "simple-bus";

	soc-sram-error {
		compatible = "fsl,soc-sram-error";
		interrupts = <16 2 1 29>;
	};

	corenet-law@0 {
		compatible = "fsl,corenet-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <32>;
	};

	ddr1: memory-controller@8000 {
		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
		reg = <0x8000 0x1000>;
		interrupts = <16 2 1 23>;
	};

	ddr2: memory-controller@9000 {
		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
		reg = <0x9000 0x1000>;
		interrupts = <16 2 1 22>;
	};

	cpc: l3-cache-controller@10000 {
		compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
		reg = <0x10000 0x1000
		       0x11000 0x1000>;
		interrupts = <16 2 1 27
			      16 2 1 26>;
	};

	corenet-cf@18000 {
		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
		reg = <0x18000 0x1000>;
		interrupts = <16 2 1 31>;
		fsl,ccf-num-csdids = <32>;
		fsl,ccf-num-snoopids = <32>;
	};

	iommu@20000 {
		compatible = "fsl,pamu-v1.0", "fsl,pamu";
		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
		ranges = <0 0x20000 0x4000>;
		#address-cells = <1>;
		#size-cells = <1>;
		interrupts = <
			24 2 0 0
			16 2 1 30>;
		fsl,portid-mapping = <0x3c000000>;

		pamu0: pamu@0 {
			reg = <0 0x1000>;
			fsl,primary-cache-geometry = <32 1>;
			fsl,secondary-cache-geometry = <128 2>;
		};

		pamu1: pamu@1000 {
			reg = <0x1000 0x1000>;
			fsl,primary-cache-geometry = <32 1>;
			fsl,secondary-cache-geometry = <128 2>;
		};

		pamu2: pamu@2000 {
			reg = <0x2000 0x1000>;
			fsl,primary-cache-geometry = <32 1>;
			fsl,secondary-cache-geometry = <128 2>;
		};

		pamu3: pamu@3000 {
			reg = <0x3000 0x1000>;
			fsl,primary-cache-geometry = <32 1>;
			fsl,secondary-cache-geometry = <128 2>;
		};
	};

/include/ "qoriq-mpic.dtsi"

	guts: global-utilities@e0000 {
		compatible = "fsl,qoriq-device-config-1.0";
		reg = <0xe0000 0xe00>;
		fsl,has-rstcr;
		#sleep-cells = <1>;
		fsl,liodn-bits = <12>;
	};

	pins: global-utilities@e0e00 {
		compatible = "fsl,qoriq-pin-control-1.0";
		reg = <0xe0e00 0x200>;
		#sleep-cells = <2>;
	};

/include/ "qoriq-clockgen1.dtsi"
	global-utilities@e1000 {
		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
	};

	rcpm: global-utilities@e2000 {
		compatible = "fsl,qoriq-rcpm-1.0";
		reg = <0xe2000 0x1000>;
		#sleep-cells = <1>;
	};

	sfp: sfp@e8000 {
		compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
		reg	   = <0xe8000 0x1000>;
	};

	serdes: serdes@ea000 {
		compatible = "fsl,p5020-serdes";
		reg	   = <0xea000 0x1000>;
	};

/include/ "qoriq-dma-0.dtsi"
	dma@100300 {
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
	};

/include/ "qoriq-dma-1.dtsi"
	dma@101300 {
		fsl,iommu-parent = <&pamu0>;
		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
	};

/include/ "qoriq-espi-0.dtsi"
	spi@110000 {
		fsl,espi-num-chipselects = <4>;
	};

/include/ "qoriq-esdhc-0.dtsi"
	sdhc@114000 {
		compatible = "fsl,p5020-esdhc", "fsl,esdhc";
		fsl,iommu-parent = <&pamu1>;
		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
		sdhci,auto-cmd12;
	};

/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
	usb0: usb@210000 {
		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
		fsl,iommu-parent = <&pamu1>;
		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
		phy_type = "utmi";
		port0;
	};

/include/ "qoriq-usb2-dr-0.dtsi"
	usb1: usb@211000 {
		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
		fsl,iommu-parent = <&pamu1>;
		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
		dr_mode = "host";
		phy_type = "utmi";
	};

/include/ "qoriq-sata2-0.dtsi"
	sata@220000 {
		fsl,iommu-parent = <&pamu1>;
		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
	};

/include/ "qoriq-sata2-1.dtsi"
	sata@221000 {
		fsl,iommu-parent = <&pamu1>;
		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
	};
/include/ "qoriq-sec4.2-0.dtsi"
	crypto@300000 {
		fsl,iommu-parent = <&pamu1>;
	};

/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi"

/include/ "qoriq-raid1.0-0.dtsi"
	raideng@320000 {
		fsl,iommu-parent = <&pamu1>;
	};

/include/ "qoriq-fman-0.dtsi"
/include/ "qoriq-fman-0-1g-0.dtsi"
/include/ "qoriq-fman-0-1g-1.dtsi"
/include/ "qoriq-fman-0-1g-2.dtsi"
/include/ "qoriq-fman-0-1g-3.dtsi"
/include/ "qoriq-fman-0-1g-4.dtsi"
/include/ "qoriq-fman-0-10g-0.dtsi"
	fman@400000 {
		enet0: ethernet@e0000 {
		};

		enet1: ethernet@e2000 {
		};

		enet2: ethernet@e4000 {
		};

		enet3: ethernet@e6000 {
		};

		enet4: ethernet@e8000 {
		};

		enet5: ethernet@f0000 {
		};
	};
};