| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116 |
- Kernel driver adm1275
- =====================
- Supported chips:
- * Analog Devices ADM1075
- Prefix: 'adm1075'
- Addresses scanned: -
- Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
- * Analog Devices ADM1275
- Prefix: 'adm1275'
- Addresses scanned: -
- Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
- * Analog Devices ADM1276
- Prefix: 'adm1276'
- Addresses scanned: -
- Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
- * Analog Devices ADM1278
- Prefix: 'adm1278'
- Addresses scanned: -
- Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
- * Analog Devices ADM1293/ADM1294
- Prefix: 'adm1293', 'adm1294'
- Addresses scanned: -
- Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
- Author: Guenter Roeck <linux@roeck-us.net>
- Description
- -----------
- This driver supports hardware monitoring for Analog Devices ADM1075, ADM1275,
- ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and Digital
- Power Monitors.
- ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
- controllers that allow a circuit board to be removed from or inserted into
- a live backplane. They also feature current and voltage readback via an
- integrated 12 bit analog-to-digital converter (ADC), accessed using a
- PMBus interface.
- The driver is a client driver to the core PMBus driver. Please see
- Documentation/hwmon/pmbus for details on PMBus client drivers.
- Usage Notes
- -----------
- This driver does not auto-detect devices. You will have to instantiate the
- devices explicitly. Please see Documentation/i2c/instantiating-devices for
- details.
- The ADM1075, unlike many other PMBus devices, does not support internal voltage
- or current scaling. Reported voltages, currents, and power are raw measurements,
- and will typically have to be scaled.
- Platform data support
- ---------------------
- The driver supports standard PMBus driver platform data. Please see
- Documentation/hwmon/pmbus for details.
- Sysfs entries
- -------------
- The following attributes are supported. Limits are read-write, history reset
- attributes are write-only, all other attributes are read-only.
- inX_label "vin1" or "vout1" depending on chip variant and
- configuration. On ADM1075, ADM1293, and ADM1294,
- vout1 reports the voltage on the VAUX pin.
- inX_input Measured voltage.
- inX_min Minimum Voltage.
- inX_max Maximum voltage.
- inX_min_alarm Voltage low alarm.
- inX_max_alarm Voltage high alarm.
- inX_highest Historical maximum voltage.
- inX_reset_history Write any value to reset history.
- curr1_label "iout1"
- curr1_input Measured current.
- curr1_max Maximum current.
- curr1_max_alarm Current high alarm.
- curr1_lcrit Critical minimum current. Depending on the chip
- configuration, either curr1_lcrit or curr1_crit is
- supported, but not both.
- curr1_lcrit_alarm Critical current low alarm.
- curr1_crit Critical maximum current. Depending on the chip
- configuration, either curr1_lcrit or curr1_crit is
- supported, but not both.
- curr1_crit_alarm Critical current high alarm.
- curr1_highest Historical maximum current.
- curr1_reset_history Write any value to reset history.
- power1_label "pin1"
- power1_input Input power.
- power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only.
- power1_input_highest Highest observed input power.
- power1_reset_history Write any value to reset history.
- Power attributes are supported on ADM1075, ADM1276,
- ADM1293, and ADM1294.
- temp1_input Chip temperature.
- Temperature attributes are only available on ADM1278.
- temp1_max Maximum chip temperature.
- temp1_max_alarm Temperature alarm.
- temp1_crit Critical chip temperature.
- temp1_crit_alarm Critical temperature high alarm.
- temp1_highest Highest observed temperature.
- temp1_reset_history Write any value to reset history.
- Temperature attributes are supported on ADM1278.
|
