| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135 |
- menu "Linux Kernel Extensions"
- #-------------------------------------------------------------------------------
- # Xenomai
- config BR2_LINUX_KERNEL_EXT_XENOMAI
- bool "Adeos/Xenomai Real-time patch"
- depends on BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS
- depends on BR2_TOOLCHAIN_HAS_THREADS
- depends on !BR2_TOOLCHAIN_USES_MUSL
- select BR2_PACKAGE_XENOMAI
- help
- Xenomai is split in two parts: a kernel part and a userspace
- part. Enabling this option automatically selects the Xenomai
- package and helps in patching the Linux kernel built by
- Buildroot with the Xenomai kernel part (ie Adeos/Ipipe).
- You can find the currently supported kernel versions by
- looking at the available patches in the Xenomai sources
- tree: ksrc/arch/$(ARCH)/patches
- However, it is recommended to use the latest version of the
- Adeos/Ipipe patch available at
- http://download.gna.org/adeos/patches
- Xenomai is know to support Blackfin, SH4, x86, ARM, NIOS2
- and PowerPC architectures.
- config BR2_LINUX_KERNEL_EXT_XENOMAI_ADEOS_PATCH
- string "Path for Adeos patch file"
- depends on BR2_LINUX_KERNEL_EXT_XENOMAI
- help
- Optionally, explicitly specify the Adeos patch to use.
- Download it at http://download.gna.org/adeos/patches
- and verify that your kernel version in buildroot matches.
- comment "xenomai needs a uClibc or glibc toolchain w/ threads"
- depends on BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS
- depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_USES_MUSL
- #-------------------------------------------------------------------------------
- # RTAI
- config BR2_LINUX_KERNEL_EXT_RTAI
- bool "RTAI Real-time patch"
- select BR2_PACKAGE_RTAI
- help
- RTAI Kernel part.
- #-------------------------------------------------------------------------------
- # ev3dev Linux drivers
- config BR2_LINUX_KERNEL_EXT_EV3DEV_LINUX_DRIVERS
- bool "ev3dev Linux drivers"
- select BR2_PACKAGE_EV3DEV_LINUX_DRIVERS
- help
- Linux drivers for LEGO MINDSTORMS EV3 from the ev3dev project.
- https://github.com/ev3dev/lego-linux-drivers
- #-------------------------------------------------------------------------------
- # fbtft
- config BR2_LINUX_KERNEL_EXT_FBTFT
- bool "FB TFT drivers"
- select BR2_PACKAGE_FBTFT
- help
- Linux Framebuffer drivers for small TFT LCD display modules,
- e.g. Adafruit PiTFT displays for Raspberry Pi (this extra
- package is only needed for linux kernels until v3.19, since
- v4.0 the drivers are included in the staging area).
- To enable fbtft, e.g. for Adafruit 2.8 PiTFT, enable the
- following kernel configurations:
- - CONFIG_SPI
- - CONFIG_GPIOLIB
- - CONFIG_FB
- - CONFIG_FB_TFT
- - CONFIG_FB_TFT_ILI9341
- https://github.com/notro/fbtft
- # aufs-standalone
- config BR2_LINUX_KERNEL_EXT_AUFS
- bool "Aufs Filesystem Module patch"
- select BR2_PACKAGE_AUFS
- help
- Aufs is split in two parts: a kernel part and a userspace
- part. Enabling this option automatically selects the aufs
- standalone (module) package and patches the Linux kernel
- built by Buildroot with the aufs kernel part (ie fs/aufs).
- It is important to use the correct branch of aufs-standalone.
- if BR2_LINUX_KERNEL_EXT_AUFS
- choice
- bool "aufs-standalone series"
- help
- Select the major series of this version. This must match the
- major version of your kernel (e.g. for kernels 3.x, select
- aufs3.x; for kernels 4.x, select aufs4.x).
- Note: neither aufs1.x nor aufs2.x (both for kernels older than
- 3.x) are supported.
- config BR2_LINUX_KERNEL_EXT_AUFS_SERIES_3
- bool "aufs3.x"
- config BR2_LINUX_KERNEL_EXT_AUFS_SERIES_4
- bool "aufs4.x"
- endchoice
- config BR2_LINUX_KERNEL_EXT_AUFS_SERIES
- int
- default 3 if BR2_LINUX_KERNEL_EXT_AUFS_SERIES_3
- default 4 if BR2_LINUX_KERNEL_EXT_AUFS_SERIES_4
- config BR2_LINUX_KERNEL_EXT_AUFS_VERSION
- string "aufs-standalone version"
- default ""
- help
- The version you choose must match that of your kernel.
- Usually, the sha1 of the cset you want to use; avoid using a
- branch name as this yields non-reproducible builds.
- See the following resources to see what versions are
- available:
- For aufs3.x:
- https://sourceforge.net/p/aufs/aufs3-standalone/ref/master/branches/
- For aufs4.x:
- https://github.com/sfjro/aufs4-standalone/branches/all
- endif # aufs
- endmenu
|
