| 1234567891011121314151617181920212223242526272829 |
- How to get started with the MinnowBoard MAX
- ===========================================
- 1. Build
- Apply the defconfig:
- $ make minnowboard_max_defconfig
- Add any additional packages required and build:
- $ make
- 2. Write the SD card
- The build process will create a SD card image in output/images.
- Write the image to an mSD card, insert into the MinnowBoard MAX
- and power the board on.
- $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync
- The system starts two consoles: one on the serial port
- and one on HDMI.
- 3. Enjoy
- Additional information about this board can be found at
- http://www.minnowboard.org/.
|
