| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546 |
- *********
- liteBoard
- *********
- Build
- =====
- First, configure Buildroot for your liteBoard:
- make grinn_liteboard_defconfig
- Build image:
- make
- After building you should get a tree like this:
- output/images/
- ├── boot.vfat
- ├── imx6ul-liteboard.dtb
- ├── rootfs.ext2
- ├── rootfs.ext4
- ├── rootfs.tar
- ├── sdcard.img
- ├── u-boot.imx
- └── zImage
- Create a bootable microSD card
- ==============================
- Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/
- directory, To flash SD card just run the following command:
- sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M
- where <sd_card> can be sdX or mmcblkX
- *** WARNING! This will destroy all contents of device you specify! ***
- Boot liteBoard
- ==============
- - insert the microSD card in the microSD slot of the board;
- - plug micro USB cable to provide power and console interface
- - use terminal emulator with 115200 bps, 8n1
|
