| 1234567891011121314151617181920212223242526272829303132333435363738 |
- Intro
- =====
- This default configuration will allow you to start experimenting with the
- buildroot environment for the Nanopi A64. With the current configuration
- it will bring-up the board, and allow access through the serial console.
- Nanopi A64 link:
- http://nanopi.io/nanopi-a64.html
- Wiki link:
- https://openedev.amarulasolutions.com/display/ODWIKI/FriendlyARM+Nanopi+A64
- This configuration uses U-Boot mainline and kernel mainline.
- How to build
- ============
- $ make friendlyarm_nanopi_a64_defconfig
- $ make
- Note: you will need access to the internet to download the required
- sources.
- How to write the SD card
- ========================
- Once the build process is finished you will have an image called "sdcard.img"
- in the output/images/ directory.
- Copy the bootable "sdcard.img" onto an SD card with "dd":
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
- Insert the micro SDcard in your Nanopi A64 and power it up. The console
- is on the serial line, 115200 8N1.
|
