| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- Acme Systems Arietta G25
- Intro
- =====
- This default configuration will allow you to start experimenting with the
- buildroot environment for the Arietta G25. With the current configuration
- it will bring-up the board, and allow access through the serial console.
- You can find additional informations, tutorials and a very comprehensive
- documentation on http://www.acmesystems.it/arietta.
- Build instructions
- ==================
- To build an image for the Arietta G25 choose the configuration
- corresponding to the Arietta variant.
- For 128MB RAM variant type:
- $ make acmesystems_arietta_g25_128mb_defconfig
- else for 256MB RAM variant type:
- $ make acmesystems_arietta_g25_256mb_defconfig
- To customize the configuration chosen type:
- $ make menuconfig
- When you are ready to start building Buildroot type:
- $ make
- How to write the microSD card
- =============================
- Once the build process is finished you will have an image called "sdcard.img"
- in the output/images/ directory.
- Copy the bootable "sdcard.img" onto an SD card with "dd":
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- Insert the microSD card into the Arietta slot and power it.
- The image just built is fairly basic and the only output
- you will get is on serial console, please consider to use a DPI
- cable (http://www.acmesystems.it/DPI)
|
