| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455 |
- ***************************
- Freescale i.MX7D SDB board
- ***************************
- This file documents the Buildroot support for the Freescale i.MX7D SDB board.
- Build
- =====
- First, configure Buildroot for your i.MX7D SDB board:
- make freescale_imx7dsabresd_defconfig
- Build all components:
- make
- You will find in output/images/ the following files:
- - imx7d-sdb.dtb
- - rootfs.ext4
- - rootfs.tar
- - sdcard.img
- - u-boot.imx
- - zImage
- Create a bootable SD card
- =========================
- To determine the device associated to the SD card have a look in the
- /proc/partitions file:
- cat /proc/partitions
- Buildroot prepares a bootable "sdcard.img" image in the output/images/
- directory, ready to be dumped on a SD card. Launch the following
- command as root:
- dd if=./output/images/sdcard.img of=/dev/<your-sd-device>
- *** WARNING! This will destroy all the card content. Use with care! ***
- For details about the medium image layout, see the definition in
- board/freescale/common/imx/genimage.cfg.template.
- Boot the i.MX7D SDB board
- =========================
- To boot your newly created system:
- - insert the SD card in the SD slot of the board;
- - put a micro USB cable into the Debug USB Port and connect using a terminal
- emulator at 115200 bps, 8n1;
- - power on the board.
- Enjoy!
|
