Aylinux-2021/mps/bin/milis-kur

#!/bin/bash
#
# Milis Linux konsol kurulumu için Void Linux kurulum çatallaması
# This installer forked from Void Linux installer for Milis Linux terminal based installation
#            	
#				2018-2020 milisarge <milisarge@gmail.com>.
#				2018 Aydin <yakar@live.com>
# 	
# 			    2012-2015 Juan Romero Pardines <xtraeme@Voidlinux.org>.
#               2012 Dave Elusive <davehome@redthumb.info.tm>.
#               
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#-


DIZIN=`dirname $(readlink -f $0)`

dil=${LANG/.*}
if [ $dil == "en_US" ];then
	# Language
	LANG_LANG="English"


	LANG_MENULABEL="Use UP and DOWN keys to navigate menus. Use TAB to switch between buttons and ENTER to select."
	LANG_INSTALLATION="Installation"
	LANG_BACK="Back"
	LANG_CHANGE="Change"
	LANG_DONE="Done"
	LANG_PROCESSING="processing as settings"
	LANG_SELECTPARTITION="Select the partition to edit"
	LANG_SELECTFILESYSTEM="Select the filesystem type for %s"
	LANG_MOUNTPOINT="Please specify the mount point for %s (use / as default)"
	LANG_NEWFILESYSTEM="Do you want to create a new filesystem on %s?"
	LANG_SELECTDISKPART="Select the disk to partition"

	LANG_SCANLOCALES="Scanning locales"
	LANG_MODPARTTABLE="Modify Partition Table on %s"
	LANG_PARTITIONDIALOG="\n
	%scfdisk will be executed in disk %s.%s\n\n
	For BIOS systems, MBR or GPT partition tables are supported.\n
	To use GPT on PC BIOS systems an empty partition of 1MB must be added\n
	at the first 2GB of the disk with the TOGGLE \`bios_grub' enabled.\n
	%sNOTE: you don't need this on EFI systems.%s\n\n
	For EFI systems GPT is mandatory and a FAT32 partition with at least\n
	100MB must be created with the TOGGLE \`boot', this will be used as\n
	EFI System Partition. This partition must have mountpoint as \`/boot/efi'.\n\n
	At least 1 partition is required for the rootfs (/).\n
	For swap, RAM*2 must be really enough. For / 600MB are required.\n\n
	%sWARNING: /usr is not supported as a separate partition.%s\n\n"

	LANG_SELKEYMAP="Select your keymap"
	LANG_SELLOCAL="Select your locale"
	LANG_SELTZONE="Select your timezone"

	LANG_SETHOST="Set the machine hostname"

	LANG_ROOTPW="Enter the root password"
	LANG_ROOTPWAGAIN="Enter the root password again"
	LANG_PWNOTMATCH="Passwords do not match! Please enter again."

	LANG_LOGINNAME="Enter a primary login name"
	LANG_USERNAME="Enter a user name for login"
	LANG_PASSWORD="Enter the password for login"
	LANG_PASSWORDAGAIN="Enter the password for login again"

	LANG_GMEMLOGIN="Select group membership for login"

	LANG_BOOTLOADER="Select the disk to install the bootloader"
	LANG_BOOTLOTHER="Manage bootloader otherwise"
	LANG_BOOTLGRAPH="Use a graphical terminal for the boot loader?"

	LANG_GRUBINST="Running grub-install %s..."
	LANG_GRUBFAIL="%sERROR:%s failed to install GRUB to %s!\nCheck %s for errors."
	LANG_GRUBMKCONF="Running grub-mkconfig on %s..."
	LANG_GRUBMKCONFFAIL="%sERROR%s: failed to run grub-mkconfig!\nCheck %s for errors."

	LANG_NEWFSYSTEM="NEW FILESYSTEM"
	LANG_MOUNTEDON="%s (%s) mounted on %s as %s\n"

	LANG_FSYSTEMNOTSET="%sERROR:%s the mount point for the root filesystem (/) has not yet been configured."
	LANG_FSYSNOTSUPPORTED="%sERROR:%s /usr mount point has been configured but is not supported, please remove it to continue."
	LANG_FSYSEFINOTSET="%sERROR:%s The EFI System Partition has not yet been configured, please create it\n
	as FAT32, mountpoint /boot/efi and at least with 100MB of size."

	LANG_SWAPFAIL="%sERROR:%s failed to create swap on %s!\ncheck %s for errors."
	LANG_SWAPERROR="%sERROR:%s failed to activate swap on %s!\ncheck %s for errors."

	LANG_ERRLOGTITLE="Check %s for details ..."
	LANG_CREATEFSYS="Creating filesystem %s on %s for %s ..."
	LANG_CREATEMKFS="Running %s..."

	LANG_CREATEFAIL="%sERROR:%s failed to create filesystem %s on %s!\ncheck %s for errors."
	LANG_MOUNTINGON="Mounting %s on %s (%s)..."
	LANG_MOUNTINGERR="%sERROR:%s failed to mount %s on %s! check %s for errors."

	LANG_SWAPDISABLING="Disabling swap space on %s..."
	LANG_SWAPUNMOUNTING="Unmounting %s..."

	LANG_PROGRESS="Progress: %d.%d%% (%d of %d files)\n"

	LANG_COUNTFILES="Counting files, please be patient ..."
	LANG_CPLIVEIMG="Copying live image to target rootfs."

	LANG_DHCPON="enabled"

	LANG_FSYSNOTCONF="%sRequired filesystems were not configured, please do so before starting the installation.%s"
	LANG_ROOTPWNOTCONF="%sThe root password has not been configured, please do so before starting the installation.%s"
	LANG_BOOTLNOTCONF="%sThe disk to install the bootloader has not been configured, please do so before starting the installation.%s"
	LANG_DESTROYWARN="%sThe following operations will be executed:%s\n\n
	%s\n
	%sWARNING: data on partitions will be COMPLETELY DESTROYED for new \
	filesystems.%s\n\n
	%sDo you want to continue?%s"
	LANG_RMTARGET="Removing %s live user from targetdir ..."
	LANG_BUILDINGINITRAMFS="Rebuilding initramfs for target ..."
	LANG_APPLYSETTINGS="Applying installer settings..."

	LANG_ENABLESUDO="Enable sudo for login '%s'"

	LANG_INSTALLSUCCESS="%sMilis Linux has been installed successfully!%s\nDo you want to reboot the system?"

	LANG_MENUSETTINGS="Settings"
	LANG_INSTMENU="Milis Linux installation menu"

	LANG_MENUKEYBOARD="Keyboard"
	LANG_MENUHOSTNAME="Hostname"
	LANG_MENULOCALE="Locale"
	LANG_MENUTIMEZONE="Timezone"
	LANG_MENUROOTPW="RootPassword"
	LANG_MENUUSERACC="UserAccount"
	LANG_MENUBOOTLOADER="BootLoader"
	LANG_MENUPARTITION="Partition"
	LANG_MENUFILESYSTEM="Filesystems"
	LANG_MENUINSTALL="Install"
	LANG_MENUEXIT="Exit"

	LANG_KEYBOARDSET="Set system keyboard"
	LANG_HOSTSET="Set system hostname"
	LANG_LOCALESET="Set system locale"
	LANG_TIMEZONESET="Set system time zone"
	LANG_ROOTPWSET="Set system root password"
	LANG_USERNPWSET="Set primary user name and password"
	LANG_BOOTLOADERSET="Set disk to install bootloader"
	LANG_PARTITIONSET="Partition disk(s)"
	LANG_FSYSSET="Configure filesystems and mount points"
	LANG_INSTALLSETTINGS="Start installation with saved settings"
	LANG_EXITINST="Exit installation"
	LANG_ABORTINST="Abort Installation?"
	LANG_ERRDIALOG="ERROR: missing dialog command, exiting..."
	LANG_INSTMUSTROOT="Milis-installer must run as root"

	LANG_SAVEDSETTINGS="Saved settings for installation"

	LANG_ENTERMILIS="Milis Linux / $LANG_LANG"
	LANG_MAINDIALOG="\n
	Welcome to the Milis Linux installation. A simple and minimal \
	Linux distribution made from scratch and built from the source package tree \
	available for MPS, a new alternative package system.\n\n
	The installation should be pretty straightforward. If you are in trouble \
	please join us at %s#milisarge%s on %sirc.freenode.org%s or \
	ask the %sforums%s on the site.\n\n
	%shttp://www.milislinux.org%s\n\n"


else

	# Language
	LANG_LANG="Türkçe"


	LANG_MENULABEL="YUKARI ve AŞAĞI ok tuşları ile menüde ilerleyebilirsiniz. TAB tuşu ile butonlar arasında geçebilir ve ENTER ile seçebilirsiniz."
	LANG_INSTALLATION="Yükleyici"
	LANG_BACK="Geri"
	LANG_CHANGE="Değiştir"
	LANG_DONE="Bitti"
	LANG_PROCESSING="ayar dosyası işleniyor"
	LANG_SELECTPARTITION="Düzenlenecek bölümü seçiniz"
	LANG_SELECTFILESYSTEM="%s için dosya sistemi türü seçiniz"
	LANG_MOUNTPOINT="Lütfen %s için atama (mount) noktası belirtiniz. (öntanımlı kullanım için / kullanın.)"
	LANG_NEWFILESYSTEM="%s üzerinde yeni dosya sistemi oluşturmak ister misiniz?"
	LANG_SELECTDISKPART="Bölümleme için disk seçiniz"

	LANG_SCANLOCALES="Yerel diller araştırılıyor"
	LANG_MODPARTTABLE="%s üzerinde bölümleme (partition) tablosunu düzenle"
	LANG_PARTITIONDIALOG="\n
	%scfdisk %s üzerinde çalıştırıldı.%s\n\n
	BIOS sistemler için MBR veya GPT bölümleme tablosu desteklenmektedir.\n
	PC BIOS sistemlerde GPT kullanmak için TOGGLE \`bios_grub' aktifse diskin\n
	ilk 2GB kısmına 1MB boş bir bölüm eklenmelidir.\n
	%sNOT: EFI sistemleri üzerinde buna ihtiyacınız yoktur.%s\n\n
	EFI sistemleri için GPT zorunludur ve TOGGLE \`boot' ile en az\n
	100MB bir FAT32 bölümü oluşturulmalıdır, bu EFI sistem bölümü olarak\n
	kullanılacaktır. Bu bölüm \`/boot/efi' olarak atanmış (mount) olmalıdır.\n\n
	En az 1 bölüm kök dizini (rootfs) (/) için gereklidir.\n
	Swap için RAM*2 yeterlidir. Kök dizini (/) için 600MB zorunludur.\n\n
	%sUYARI: /usr ayrı bir bölümleme olarak desteklenmemektedir.%s\n\n"

	LANG_SELKEYMAP="Klavye düzenini seçiniz"
	LANG_SELLOCAL="Bölgesel ayarları seçiniz"
	LANG_SELTZONE="Zaman diliminizi seçiniz"

	LANG_SETHOST="Bilgisayar adını giriniz"

	LANG_ROOTPW="Root parolasını giriniz"
	LANG_ROOTPWAGAIN="Root parolasını tekrar giriniz"
	LANG_PWNOTMATCH="Parolalar uyuşmamaktadır! Lütfen tekrar deneyiniz."

	LANG_LOGINNAME="Kullanıcı giriş adını giriniz"
	LANG_USERNAME="Kullanıcı gerçek adını giriniz"
	LANG_PASSWORD="Parolanızı giriniz"
	LANG_PASSWORDAGAIN="Parolanızı tekrar giriniz"

	LANG_GMEMLOGIN="Kullanıcının grup üyeliklerini seçiniz"

	LANG_BOOTLOADER="Önyükleyicinin (bootloader) yükleneceği diski seçiniz"
	LANG_BOOTLOTHER="Önyükleyici kullanma"
	LANG_BOOTLGRAPH="Terminalde önyükleyici için grafik arayüzü kullanmak ister misiniz?"

	LANG_GRUBINST="Çalıştırılıyor grub-install %s..."
	LANG_GRUBFAIL="%sHATA:%s %s GRUB kurulamadı!\nHata için %s kontrol ediniz."
	LANG_GRUBMKCONF="%s üzerinde grub-mkconfig çalıştırılıyor..."
	LANG_GRUBMKCONFFAIL="%sHATA%s: grub-mkconfig çalıştırılamadı!\nHata için %s kontrol ediniz."

	LANG_NEWFSYSTEM="YENİ DOSYA SİSTEMİ"
	LANG_MOUNTEDON="%s (%s) için atama noktası %s (%s)\n"

	LANG_FSYSTEMNOTSET="%sHATA:%s Root dosya sistemi (/) için atama noktası henüz ayarlanmadı."
	LANG_FSYSNOTSUPPORTED="%sHATA:%s /usr atama noktası ayarlandı fakat desteklenmiyor, lütfen kaldırıp devam ediniz."
	LANG_FSYSEFINOTSET="%sHATA:%s EFI sistem bölümlemesi henüz ayarlanmadı, lütfen FAT32 olarak oluşturun,\n
	/boot/efi atama noktası en az 100MB olamalıdır."

	LANG_SWAPFAIL="%sHATA:%s swap alanı %s üzerinde oluşturulamadı!\nHata için %s kontrol ediniz."
	LANG_SWAPERROR="%sHATA:%s swap alanı %s üzerinde aktif edilemedi!\nHata için %s kontrol ediniz."

	LANG_ERRLOGTITLE="Detaylar için %s kontrol ediniz ..."
	LANG_CREATEFSYS="Dosya sistemi %s %s üzerinde %s için oluşturuluyor..."
	LANG_CREATEMKFS="%s çalıştırılıyor..."

	LANG_CREATEFAIL="%sHATA:%s failed to create filesystem %s on %s!\nHata için %s kontrol ediniz."
	LANG_MOUNTINGON="Atanıyor %s %s üzerine (%s)..."
	LANG_MOUNTINGERR="%sHATA:%s %s %s üzerine atanamadı! Hata için %s kontrol ediniz."

	LANG_SWAPDISABLING="%s üzerindeki swap alanı iptal ediliyor..."
	LANG_SWAPUNMOUNTING="%s ataması ayrılıyor (unmount)..."

	LANG_PROGRESS="İlerleme: %d.%d%% (dosyalar %d / %d)\n"

	LANG_COUNTFILES="Dosyalar hesaplanıyor, lütfen sabırlı olunuz ..."
	LANG_CPLIVEIMG="Canlı imaj hedef kök dizine (rootfs) kopyalanıyor."

	LANG_DHCPON="aktifleşti"

	LANG_FSYSNOTCONF="%sGerekli dosya sistemleri yapılandırılmadı, lütfen yüklemeye başlamadan önce yapılandırınız.%s"
	LANG_ROOTPWNOTCONF="%sRoot parola yapılandırılmamış, lütfen yüklemeye başlamadan önce yapılandırınız.%s"
	LANG_BOOTLNOTCONF="%sÖnyükleyiciyi yüklemek için disk yapılandırılmamış, lütfen yüklemeye başlamadan önce yapılandırınız.%s"
	LANG_DESTROYWARN="%sAşağıdaki operasyon çalıştırılacak:%s\n\n
	%s\n
	%sUYARI: Yeni dosya sistemi için bölümlerdeki veri TAMAMEN SİLİNECEKTİR.%s\n\n
	%sDevam etmek istiyor musunuz?%s"
	LANG_RMTARGET="Hedef dizin için %s canlı kullanıcısı kaldırılıyor ..."
	LANG_BUILDINGINITRAMFS="Hedef için initramfs oluşturuluyor ..."
	LANG_APPLYSETTINGS="Yükleyici ayarları uygulanıyor..."

	LANG_ENABLESUDO="Giriş için sudo '%s' aktifleştiriliyor"

	LANG_INSTALLSUCCESS="%sMilis Linux başarıyla yüklendi!%s\nSistemi yeniden başlatmak ister misiniz?"

	LANG_MENUSETTINGS="Ayarlar"
	LANG_INSTMENU="Milis Linux Yükleyici Menüsü"

	LANG_MENUKEYBOARD="Klavye"
	LANG_MENUHOSTNAME="BilgisayarAdı"
	LANG_MENULOCALE="BölgeselAyarlar" #"Bölgesel Ayarlar"
	LANG_MENUTIMEZONE="ZamanDilimi"
	LANG_MENUROOTPW="RootParolası"
	LANG_MENUUSERACC="KullanıcıHesabı"
	LANG_MENUBOOTLOADER="Önyükleyici"
	LANG_MENUPARTITION="Bölümleme"
	LANG_MENUFILESYSTEM="DosyaSistemi"
	LANG_MENUINSTALL="Yükle"
	LANG_MENUEXIT="Çıkış"

	LANG_KEYBOARDSET="Klavye ayarlarını seçiniz"
	LANG_HOSTSET="Bilgisayar adını giriniz"
	LANG_LOCALESET="Bölgesel ayarları seçiniz"
	LANG_TIMEZONESET="Zaman dilimini seçiniz"
	LANG_ROOTPWSET="Root parolarını giriniz"
	LANG_USERNPWSET="Öncelikli kullanıcı adı ve parolayı giriniz"
	LANG_BOOTLOADERSET="Önyükleyici için disk seçiniz"
	LANG_PARTITIONSET="Disk bölümleme"
	LANG_FSYSSET="Dosya sistemi ve atama (mount) noktası ayarları"
	LANG_INSTALLSETTINGS="Kayıtlı ayarlar ile yüklemeye başla"
	LANG_EXITINST="Yükleyiciden çık"
	LANG_ABORTINST="Yüklemekten çık?"
	LANG_ERRDIALOG="HATA: dialog komutu bulunamadı, çıkış yapılıyor..."
	LANG_INSTMUSTROOT="Milis-yükleyici root hakları ile çalıştırılmalıdır"

	LANG_SAVEDSETTINGS="Yükleme için ayarlar kaydedildi"

	LANG_ENTERMILIS="Milis Linux / $LANG_LANG"
	LANG_MAINDIALOG="\n
	Milis Linux kurulumuna hoş geldiniz. Sıfırdan hazırlanan, kolay ve \
	minimal bir Linux dağıtımıdır ve yeni bir alternatif paket sistemi olan \
	MPS için kullanılabilen kaynak paketlerinden üretilmiştir.\n\n
	Kurulum oldukça basittir. Eğer yardıma ihtiyacınız olursa %sirc.freenode.org%s \
	%s#milisarge%s kanalımıza katılabilir veya sitemizdeki %sforumlardan%s yardım alabilirsiniz.\n\n
	%shttp://www.milislinux.org%s\n\n"

fi

# menülerin işlem görme durumları.
HOSTNAME_YAPILDI=
KEYBOARD_YAPILDI=
LOCALE_YAPILDI=
TIMEZONE_YAPILDI=
ROOTPASSWORD_YAPILDI=
USERLOGIN_YAPILDI=
USERPASSWORD_YAPILDI=
USERNAME_YAPILDI=
USERGROUPS_YAPILDI=
BOOTLOADER_YAPILDI=
PARTITIONS_YAPILDI=
FILESYSTEMS_YAPILDI=
FORMAT_ONAY=
YEBASLAT_ONAY=
DOSYADAN_KURULUM=

HEDEF=/mnt/target
LOG=/tmp/kurulum.log

if [ ! -z $1 ];then
	AYAR_DOSYASI=$1
	if [ -f $AYAR_DOSYASI ];then
		echo "$AYAR_DOSYASI $LANG_PROCESSING ......."
		FORMAT_ONAY="HAYIR"
		YEBASLAT_ONAY="HAYIR"
		DOSYADAN_KURULUM="EVET"
	fi
	[ ! -z $2 ] && SCRMODE="$2"
else
	AYAR_DOSYASI=/tmp/.kurulum.conf
	if [ ! -f $AYAR_DOSYASI ]; then
		touch -f $AYAR_DOSYASI
	fi
fi
ANSWER=$(mktemp -t vinstall-XXXXXXXX || exit 1)
TARGET_FSTAB=$(mktemp -t vinstall-fstab-XXXXXXXX || exit 1)

if [ -f /etc/milis-surum ];then 
	MILIS_SURUM=$(cat /etc/milis-surum)
else
	MILIS_SURUM="Milis 2.0 Deneme Sürüm"
fi

if [ -f /etc/canli_kullanici ];then 
	CANLI_KULLANICI=$(cat /etc/canli_kullanici)
else
	CANLI_KULLANICI="root"
fi

trap "DIE" INT TERM QUIT

# konsol log yazmasının kapatılması
if [ -w /proc/sys/kernel/printk ]; then
    echo 0 >/proc/sys/kernel/printk
fi

# EFIli sistem tesbiti
if [ -e /sys/firmware/efi/systab ]; then
    EFI_SYSTEM=1
    EFI_FW_BITS=$(cat /sys/firmware/efi/fw_platform_size)
    if [ $EFI_FW_BITS -eq 32 ]; then
        EFI_TARGET=i386-efi
    else
        EFI_TARGET=x86_64-efi
    fi
fi

# menü renkleri
BLACK="\Z0"
RED="\Z1"
GREEN="\Z2"
YELLOW="\Z3"
BLUE="\Z4"
MAGENTA="\Z5"
CYAN="\Z6"
WHITE="\Z7"
BOLD="\Zb"
REVERSE="\Zr"
UNDERLINE="\Zu"
RESET="\Zn"

# menü pencere özellikleri
MENULABEL="${BOLD}${LANG_MENULABEL}${RESET}"
MENUSIZE="14 60 0"
INPUTSIZE="8 60"
MSGBOXSIZE="8 70"
YESNOSIZE="$INPUTSIZE"
WIDGET_SIZE="10 70"

DIALOG() {
    
    rm -f $ANSWER
    dialog --colors --keep-tite --no-shadow --no-mouse \
        --backtitle "${BOLD}${WHITE}Milis Linux ${LANG_INSTALLATION} ($MILIS_SURUM)${RESET}" \
        --cancel-label "$LANG_BACK" --aspect 20 "$@" 2>$ANSWER
    return $?
}

INFOBOX() {
    dialog --colors --no-shadow --no-mouse \
        --backtitle "${BOLD}${WHITE}Milis Linux ${LANG_INSTALLATION} ($MILIS_SURUM)${RESET}" \
        --title "${TITLE}" --aspect 20 --infobox "$@"
}

DIE() {
    rval=$1
    [ -z "$rval" ] && rval=0
    clear
    rm -f $ANSWER $TARGET_FSTAB
    # printk yeniden aktif etme
    if [ -w /proc/sys/kernel/printk ]; then
        echo 4 >/proc/sys/kernel/printk
    fi
    umount_filesystems
    exit $rval
}

set_option() {
    if grep -Eq "^${1}.*" $AYAR_DOSYASI; then
        sed -i -e "/^${1}.*/d" $AYAR_DOSYASI
    fi
    echo "${1} ${2}" >>$AYAR_DOSYASI
}

get_option() {
    echo $(grep -E "^${1}.*" $AYAR_DOSYASI|sed -e "s|${1}||")
}

# ISO-639'e göre dil isimleri
iso639_language() {
    case "$1" in
    aa)  echo "Afar" ;;
    af)  echo "Afrikaans" ;;
    an)  echo "Aragonese" ;;
    ar)  echo "Arabic" ;;
    ast) echo "Asturian" ;;
    be)  echo "Belgian" ;;
    bg)  echo "Bulgarian" ;;
    bhb) echo "Bhili" ;;
    br)  echo "Breton" ;;
    bs)  echo "Bosnian" ;;
    ca)  echo "Catalan" ;;
    cs)  echo "Czech" ;;
    cy)  echo "Welsh" ;;
    da)  echo "Danish" ;;
    de)  echo "German" ;;
    el)  echo "Greek" ;;
    en)  echo "English" ;;
    es)  echo "Spanish" ;;
    et)  echo "Estonian" ;;
    eu)  echo "Basque" ;;
    fi)  echo "Finnish" ;;
    fo)  echo "Faroese" ;;
    fr)  echo "French" ;;
    ga)  echo "Irish" ;;
    gd)  echo "Scottish Gaelic" ;;
    gl)  echo "Galician" ;;
    gv)  echo "Manx" ;;
    he)  echo "Hebrew" ;;
    hr)  echo "Croatian" ;;
    hsb) echo "Upper Sorbian" ;;
    hu)  echo "Hungarian" ;;
    id)  echo "Indonesian" ;;
    is)  echo "Icelandic" ;;
    it)  echo "Italian" ;;
    iw)  echo "Hebrew" ;;
    ja)  echo "Japanese" ;;
    ka)  echo "Georgian" ;;
    kk)  echo "Kazakh" ;;
    kl)  echo "Kalaallisut" ;;
    ko)  echo "Korean" ;;
    ku)  echo "Kurdish" ;;
    kw)  echo "Cornish" ;;
    lg)  echo "Ganda" ;;
    lt)  echo "Lithuanian" ;;
    lv)  echo "Latvian" ;;
    mg)  echo "Malagasy" ;;
    mi)  echo "Maori" ;;
    mk)  echo "Macedonian" ;;
    ms)  echo "Malay" ;;
    mt)  echo "Maltese" ;;
    nb)  echo "Norwegian Bokmål" ;;
    nl)  echo "Dutch" ;;
    nn)  echo "Norwegian Nynorsk" ;;
    oc)  echo "Occitan" ;;
    om)  echo "Oromo" ;;
    pl)  echo "Polish" ;;
    pt)  echo "Portugese" ;;
    ro)  echo "Romanian" ;;
    ru)  echo "Russian" ;;
    sk)  echo "Slovak" ;;
    sl)  echo "Slovenian" ;;
    so)  echo "Somali" ;;
    sq)  echo "Albanian" ;;
    st)  echo "Southern Sotho" ;;
    sv)  echo "Swedish" ;;
    tcy) echo "Tulu" ;;
    tg)  echo "Tajik" ;;
    th)  echo "Thai" ;;
    tl)  echo "Tagalog" ;;
    tr)  echo "Türkçe" ;;
    uk)  echo "Ukrainian" ;;
    uz)  echo "Uzbek" ;;
    wa)  echo "Walloon" ;;
    xh)  echo "Xhosa" ;;
    yi)  echo "Yiddish" ;;
    zh)  echo "Chinese" ;;
    zu)  echo "Zulu" ;;
    *)   echo "$1" ;;
    esac
}

# ISO-3166 ülke kodları yerel ayarlar için
iso3166_country() {
    case "$1" in
    AD) echo "Andorra" ;;
    AE) echo "United Arab Emirates" ;;
    AL) echo "Albania" ;;
    AR) echo "Argentina" ;;
    AT) echo "Austria" ;;
    AU) echo "Australia" ;;
    BA) echo "Bonsia and Herzegovina" ;;
    BE) echo "Belgium" ;;
    BG) echo "Bulgaria" ;;
    BH) echo "Bahrain" ;;
    BO) echo "Bolivia" ;;
    BR) echo "Brazil" ;;
    BW) echo "Botswana" ;;
    BY) echo "Belarus" ;;
    CA) echo "Canada" ;;
    CH) echo "Switzerland" ;;
    CL) echo "Chile" ;;
    CN) echo "China" ;;
    CO) echo "Colombia" ;;
    CR) echo "Costa Rica" ;;
    CY) echo "Cyprus" ;;
    CZ) echo "Czech Republic" ;;
    DE) echo "Germany" ;;
    DJ) echo "Djibouti" ;;
    DK) echo "Denmark" ;;
    DO) echo "Dominican Republic" ;;
    DZ) echo "Algeria" ;;
    EC) echo "Ecuador" ;;
    EE) echo "Estonia" ;;
    EG) echo "Egypt" ;;
    ES) echo "Spain" ;;
    FI) echo "Finland" ;;
    FO) echo "Faroe Islands" ;;
    FR) echo "France" ;;
    GB) echo "Great Britain" ;;
    GE) echo "Georgia" ;;
    GL) echo "Greenland" ;;
    GR) echo "Greece" ;;
    GT) echo "Guatemala" ;;
    HK) echo "Hong Kong" ;;
    HN) echo "Honduras" ;;
    HR) echo "Croatia" ;;
    HU) echo "Hungary" ;;
    ID) echo "Indonesia" ;;
    IE) echo "Ireland" ;;
    IL) echo "Israel" ;;
    IN) echo "India" ;;
    IQ) echo "Iraq" ;;
    IS) echo "Iceland" ;;
    IT) echo "Italy" ;;
    JO) echo "Jordan" ;;
    JP) echo "Japan" ;;
    KE) echo "Kenya" ;;
    KR) echo "Korea, Republic of" ;;
    KW) echo "Kuwait" ;;
    KZ) echo "Kazakhstan" ;;
    LB) echo "Lebanon" ;;
    LT) echo "Lithuania" ;;
    LU) echo "Luxembourg" ;;
    LV) echo "Latvia" ;;
    LY) echo "Libya" ;;
    MA) echo "Morocco" ;;
    MG) echo "Madagascar" ;;
    MK) echo "Macedonia" ;;
    MT) echo "Malta" ;;
    MX) echo "Mexico" ;;
    MY) echo "Malaysia" ;;
    NI) echo "Nicaragua" ;;
    NL) echo "Netherlands" ;;
    NO) echo "Norway" ;;
    NZ) echo "New Zealand" ;;
    OM) echo "Oman" ;;
    PA) echo "Panama" ;;
    PE) echo "Peru" ;;
    PH) echo "Philippines" ;;
    PL) echo "Poland" ;;
    PR) echo "Puerto Rico" ;;
    PT) echo "Portugal" ;;
    PY) echo "Paraguay" ;;
    QA) echo "Qatar" ;;
    RO) echo "Romania" ;;
    RU) echo "Russian Federation" ;;
    SA) echo "Saudi Arabia" ;;
    SD) echo "Sudan" ;;
    SE) echo "Sweden" ;;
    SG) echo "Singapore" ;;
    SI) echo "Slovenia" ;;
    SK) echo "Slovakia" ;;
    SO) echo "Somalia" ;;
    SV) echo "El Salvador" ;;
    SY) echo "Syria" ;;
    TH) echo "Thailand" ;;
    TJ) echo "Tajikistan" ;;
    TN) echo "Tunisia" ;;
    TR) echo "Türkiye" ;;
    TW) echo "Taiwan" ;;
    UA) echo "Ukraine" ;;
    UG) echo "Uganda" ;;
    US) echo "United States of America" ;;
    UY) echo "Uruguay" ;;
    UZ) echo "Uzbekistan" ;;
    VE) echo "Venezuela" ;;
    YE) echo "Yemen" ;;
    ZA) echo "South Africa" ;;
    ZW) echo "Zimbabwe" ;;
    *)  echo "$1" ;;
    esac
}

show_disks() {
    local dev size sectorsize gbytes

    # IDE
    for dev in $(ls /sys/block|grep -E '^hd'); do
        if [ "$(cat /sys/block/$dev/device/media)" = "disk" ]; then
            # sektör, alan bilgisinin bulunması;
            echo "/dev/$dev"
            size=$(cat /sys/block/$dev/size)
            sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
            gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
            echo "size:${gbytes}GB;sector_size:$sectorsize"
        fi
    done
    # SATA/SCSI ve Virtual diskleri (virtio)
    for dev in $(ls /sys/block|grep -E '^([sv]|xv)d|mmcblk|nvme'); do
        echo "/dev/$dev"
        size=$(cat /sys/block/$dev/size)
        sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size)
        gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
        echo "size:${gbytes}GB;sector_size:$sectorsize"
    done
    # cciss(4) aygıtları
    for dev in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]$'); do
        echo "/dev/cciss/$dev"
        size=$(cat /sys/block/cciss\!$dev/size)
        sectorsize=$(cat /sys/block/cciss\!$dev/queue/hw_sector_size)
        gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))"
        echo "size:${gbytes}GB;sector_size:$sectorsize"
    done
}

show_partitions() {
    local dev fstype fssize p part

    set -- $(show_disks)
    while [ $# -ne 0 ]; do
        disk=$(basename $1)
        shift 2
        # ATA/SCSI/SATA
        for p in /sys/block/$disk/$disk*; do
            if [ -d $p ]; then
                part=$(basename $p)
                fstype=$(lsblk -nfr /dev/$part|awk '{print $2}'|head -1)
                [ "$fstype" = "iso9660" ] && continue
                [ "$fstype" = "crypto_LUKS" ] && continue
                [ "$fstype" = "LVM2_member" ] && continue
                fssize=$(lsblk -nr /dev/$part|awk '{print $4}'|head -1)
                echo "/dev/$part"
                echo "size:${fssize:-unknown};fstype:${fstype:-none}"
            fi
        done
    done
    # Device Mapper
    for p in /dev/mapper/*; do
        part=$(basename $p)
        [ "${part}" = "live-rw" ] && continue
        [ "${part}" = "live-base" ] && continue
        [ "${part}" = "control" ] && continue

        fstype=$(lsblk -nfr $p|awk '{print $2}'|head -1)
        fssize=$(lsblk -nr $p|awk '{print $4}'|head -1)
        echo "${p}"
        echo "size:${fssize:-unknown};fstype:${fstype:-none}"
    done
    # Software raid (md)
    for p in $(ls -d /dev/md* 2>/dev/null|grep '[0-9]'); do
        part=$(basename $p)
        if cat /proc/mdstat|grep -qw $part; then
            fstype=$(lsblk -nfr /dev/$part|awk '{print $2}')
            [ "$fstype" = "crypto_LUKS" ] && continue
            [ "$fstype" = "LVM2_member" ] && continue
            fssize=$(lsblk -nr /dev/$part|awk '{print $4}')
            echo "$p"
            echo "size:${fssize:-unknown};fstype:${fstype:-none}"
        fi
    done
    # cciss(4) aygıtları
    for part in $(ls /dev/cciss 2>/dev/null|grep -E 'c[0-9]d[0-9]p[0-9]+'); do
        fstype=$(lsblk -nfr /dev/cciss/$part|awk '{print $2}')
        [ "$fstype" = "crypto_LUKS" ] && continue
        [ "$fstype" = "LVM2_member" ] && continue
        fssize=$(lsblk -nr /dev/cciss/$part|awk '{print $4}')
        echo "/dev/cciss/$part"
        echo "size:${fssize:-unknown};fstype:${fstype:-none}"
    done
    if [ -e /sbin/lvs ]; then
        # LVM
        lvs --noheadings|while read lvname vgname perms size; do
            echo "/dev/mapper/${vgname}-${lvname}"
            echo "size:${size};fstype:lvm"
        done
    fi
}

menu_filesystems() {
    local dev fstype fssize mntpoint reformat

    while true; do
        DIALOG --ok-label "$LANG_CHANGE" --cancel-label "$LANG_DONE" \
            --title " $LANG_SELECTPARTITION " --menu "$MENULABEL" \
            ${MENUSIZE} $(show_partitions)
        [ $? -ne 0 ] && return

        dev=$(cat $ANSWER)
        DIALOG --title " `printf "$LANG_SELECTFILESYSTEM" "$dev"` " \
            --menu "$MENULABEL" ${MENUSIZE} \
            "btrfs" "Oracle Btrfs" \
            "ext2" "Linux ext2 (no journaling)" \
            "ext3" "Linux ext3 (journal)" \
            "ext4" "Linux ext4 (journal)" \
            "f2fs" "Flash-Friendly Filesystem" \
            "swap" "Linux swap" \
            "vfat" "FAT32" \
            "xfs" "SGI's XFS"
        if [ $? -eq 0 ]; then
            fstype=$(cat $ANSWER)
        else
            continue
        fi
        if [ "$fstype" != "swap" ]; then
            DIALOG --inputbox "`printf "$LANG_MOUNTPOINT" "$dev"`:" ${INPUTSIZE}
            if [ $? -eq 0 ]; then
                mntpoint=$(cat $ANSWER)
            elif [ $? -eq 1 ]; then
                continue
            fi
        else
            mntpoint=swap
        fi
        DIALOG --yesno "`printf "$LANG_NEWFILESYSTEM" "$dev"`" ${YESNOSIZE}
        if [ $? -eq 0 ]; then
            reformat=1
        elif [ $? -eq 1 ]; then
            reformat=0
        else
            continue
        fi
        fssize=$(lsblk -nr $dev|awk '{print $4}')
        set -- "$fstype" "$fssize" "$mntpoint" "$reformat"
        if [ -n "$1" -a -n "$2" -a -n "$3" -a -n "$4" ]; then
            local bdev=$(basename $dev)
            local ddev=$(basename $(dirname $dev))
            if [ "$ddev" != "dev" ]; then
                sed -i -e "/^MOUNTPOINT \/dev\/${ddev}\/${bdev}.*/d" $AYAR_DOSYASI
            else
                sed -i -e "/^MOUNTPOINT \/dev\/${bdev}.*/d" $AYAR_DOSYASI
            fi
            echo "MOUNTPOINT $dev $1 $2 $3 $4" >>$AYAR_DOSYASI
        fi
    done
}

menu_partitions() {
    DIALOG --title " $LANG_SELECTDISKPART " \
        --menu "$MENULABEL" ${MENUSIZE} $(show_disks)
    if [ $? -eq 0 ]; then
        local device=$(cat $ANSWER)

        DIALOG --title "`printf "$LANG_MODPARTTABLE" "$device"`" --msgbox "`printf "$LANG_PARTITIONDIALOG" "${BOLD}" "$device" "${RESET}" "${BOLD}" "${RESET}" "${BOLD}" "${RESET}"`" 18 80
        if [ $? -eq 0 ]; then
            while true; do
                clear; cfdisk $device; PARTITIONS_YAPILDI=1
                break
            done
        else
            return
        fi
    fi
}

menu_keymap() {
    if [ -f /usr/bin/lightdm ];then
		local _keymaps="$(sed '/^! layout$/,/^ *$/!d;//d' /usr/share/X11/xkb/rules/base.lst | awk {'print $1 ":" $2'})"
    else
		local _keymaps="$(find /usr/share/kbd/keymaps/ -type f -iname "*.map.gz" -printf "%f\n" | sed 's|.map.gz||g' | sort)"
    fi
    local _KEYMAPS=
	
    for f in ${_keymaps}; do
        _KEYMAPS="${_KEYMAPS} ${f} -"
    done
    while true; do
        DIALOG --title " $LANG_SELKEYMAP " --menu "$MENULABEL" 14 70 14 ${_KEYMAPS}
        if [ $? -eq 0 ]; then
            set_option KEYMAP "$(cat $ANSWER)"
            loadkeys "$(cat $ANSWER)"
            KEYBOARD_YAPILDI=1
            break
        else
            return
        fi
    done
}

set_keymap() {
    local KEYMAP=$(get_option KEYMAP)
	if [ -f /usr/bin/lightdm ];then
		echo "$KEYMAP" | cut -d':' -f1 > $HEDEF/home/"$(get_option USERLOGIN)"/.Xkbmap
    else
		sed -i -e "s|KEYMAP=.*|KEYMAP=$KEYMAP|g" $HEDEF/etc/sysconfig/rc.site
    fi
}

menu_locale() {
    local _locales="$(locale -a)"
    local LOCALES ISO639 ISO3166
    local TMPFILE=$(mktemp -t vinstall-XXXXXXXX || exit 1)
    INFOBOX "$LANG_SCANLOCALES ..." 4 60
    for f in ${_locales}; do
        eval $(echo $f | awk 'BEGIN { FS="." } \
            { FS="_"; split($1, a); printf "ISO639=%s ISO3166=%s\n", a[1], a[2] }')
        echo "$f|$(iso639_language $ISO639) ($(iso3166_country $ISO3166))|" >> $TMPFILE
    done
    clear
    # ISO-639^e göre dil isimlerinin sıralanması
    LOCALES=$(sort -t '|' -k 2 < $TMPFILE | xargs | sed -e's/| /|/g')
    rm -f $TMPFILE
    while true; do
        (IFS="|"; DIALOG --title " $LANG_SELLOCAL " --menu "$MENULABEL" 18 70 18 ${LOCALES})
        if [ $? -eq 0 ]; then
            set_option LOCALE "$(cat $ANSWER)"
            LOCALE_YAPILDI=1
            break
        else
            return
        fi
    done
}

set_locale() {
	local LOCALE=$(get_option LOCALE)
	rm -rf $HEDEF/etc/profile.d/i18n.sh
	echo "export LANG=$LOCALE" > $HEDEF/etc/profile.d/i18n.sh
	echo "export LC_ALL=$LOCALE" >> $HEDEF/etc/profile.d/i18n.sh
	echo "export LANGUAGE=$LOCALE" >> $HEDEF/etc/profile.d/i18n.sh
	# environment içinde de ayarlanması
	echo "LANG=$LOCALE" > $HEDEF/etc/environment
}

menu_timezone() {
    local _tzones="$(cd /usr/share/zoneinfo; find Africa/ America/ Antarctica/ Arctic/ Asia/ Atlantic/ Australia/ Europe/ Indian/ Pacific/ UTC Turkey -type f | sort)"
    local _TIMEZONES=

    for f in ${_tzones}; do
        _TIMEZONES="${_TIMEZONES} ${f} -"
    done
    while true; do
        DIALOG --title " $LANG_SELTZONE " --menu "$MENULABEL" 14 70 14 ${_TIMEZONES}
        if [ $? -eq 0 ]; then
            set_option TIMEZONE "$(cat $ANSWER)"
            TIMEZONE_YAPILDI=1
            break
        else
            return
        fi
    done
}

set_timezone() {
    local MYTIMEZONE="$(get_option TIMEZONE)"
    if [ -f $HEDEF/etc/sysconfig/clock ];then
		sed -i '/^TIMEZONE=/ d' $HEDEF/etc/sysconfig/clock
		echo "TIMEZONE=\"$MYTIMEZONE\"" >> $HEDEF/etc/sysconfig/clock
    fi
    if [ -f /usr/share/zoneinfo/$MYTIMEZONE ];then
		rm -f $HEDEF/etc/localtime
		ln -s /usr/share/zoneinfo/$MYTIMEZONE $HEDEF/etc/localtime
    fi
}

menu_hostname() {
    while true; do
        DIALOG --inputbox "$LANG_SETHOST:" ${INPUTSIZE}
        if [ $? -eq 0 ]; then
            set_option HOSTNAME "$(cat $ANSWER)"
            HOSTNAME_YAPILDI=1
            break
        else
            return
        fi
    done
}

set_hostname() {
    echo "$(get_option HOSTNAME)" > $HEDEF/etc/hostname
    echo "127.0.0.1 $(get_option HOSTNAME)" >> /etc/hosts
    #sed -i -e "s|HOSTNAME=.*|HOSTNAME=\"$(get_option HOSTNAME)\"|g" $HEDEF/etc/sysconfig/network
}

menu_rootpassword() {
    local _firstpass _secondpass _desc

    while true; do
        if [ -z "${_firstpass}" ]; then
            _desc="$LANG_ROOTPW"
        else
            _desc="$LANG_ROOTPWAGAIN"
        fi
        DIALOG --insecure --passwordbox "${_desc}" ${INPUTSIZE}
        if [ $? -eq 0 ]; then
            if [ -z "${_firstpass}" ]; then
                _firstpass="$(cat $ANSWER)"
            else
                _secondpass="$(cat $ANSWER)"
            fi
            if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
                if [ "${_firstpass}" != "${_secondpass}" ]; then
                    INFOBOX "$LANG_PWNOTMATCH" 6 60
                    unset _firstpass _secondpass
                    sleep 2 && clear && continue
                fi
                set_option ROOTPASSWORD "${_firstpass}"
                ROOTPASSWORD_YAPILDI=1
                break
            fi
        else
            return
        fi
    done
}

set_rootpassword() {
    echo "root:$(get_option ROOTPASSWORD)" | chpasswd -R $HEDEF -c SHA512
}

menu_useraccount() {
    local _firstpass _secondpass _desc
    local _groups _status _group _checklist
    local _preset

    while true; do
        _preset=$(get_option USERLOGIN)
        [ -z "$_preset" ] && _preset=""
        DIALOG --inputbox "$LANG_LOGINNAME:" ${INPUTSIZE} "$_preset"
        if [ $? -eq 0 ]; then
            set_option USERLOGIN "$(cat $ANSWER)"
            USERLOGIN_YAPILDI=1
            break
        else
            return
        fi
    done

    while true; do
        _preset=$(get_option USERNAME)
        [ -z "$_preset" ] && _preset=""
        DIALOG --inputbox "$LANG_USERNAME '$(get_option USERLOGIN)' :" \
            ${INPUTSIZE} "$_preset"
        if [ $? -eq 0 ]; then
            set_option USERNAME "$(cat $ANSWER)"
            USERNAME_YAPILDI=1
            break
        else
            return
        fi
    done

    while true; do
        if [ -z "${_firstpass}" ]; then
            _desc="$LANG_PASSWORD '$(get_option USERLOGIN)'"
        else
            _desc="$LANG_PASSWORDAGAIN '$(get_option USERLOGIN)'"
        fi
        DIALOG --insecure --passwordbox "${_desc}" ${INPUTSIZE}
        if [ $? -eq 0 ]; then
            if [ -z "${_firstpass}" ]; then
                _firstpass="$(cat $ANSWER)"
            else
                _secondpass="$(cat $ANSWER)"
            fi
            if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then
                if [ "${_firstpass}" != "${_secondpass}" ]; then
                    INFOBOX "$LANG_PWNOTMATCH" 6 60
                    unset _firstpass _secondpass
                    sleep 2 && clear && continue
                fi
                set_option USERPASSWORD "${_firstpass}"
                USERPASSWORD_YAPILDI=1
                break
            fi
        else
            return
        fi
    done

    #_groups="wheel,audio,video,floppy,cdrom,optical,kvm"
    _groups="users,disk,network,floppy,fuse,video,lp,tty,audio,cdrom,scanner,adm,vboxusers,wheel"
    while true; do
        _desc="$LANG_GMEMLOGIN '$(get_option USERLOGIN)':"
        for _group in $(cat /etc/group); do
            _gid="$(echo ${_group} | cut -d: -f3)"
            _group="$(echo ${_group} | cut -d: -f1)"
            _status="$(echo ${_groups} | grep -w ${_group})"
            if [ -z "${_status}" ]; then
                _status=off
            else
                _status=on
            fi
            if [ -z "${_checklist}" ]; then
                _checklist="${_group} ${_group}:${_gid} ${_status}"
            else
                _checklist="${_checklist} ${_group} ${_group}:${_gid} ${_status}"
            fi
        done
        DIALOG --no-tags --checklist "${_desc}" 20 60 18 ${_checklist}
        if [ $? -eq 0 ]; then
            set_option USERGROUPS $(cat $ANSWER | sed -e's| |,|g')
            USERGROUPS_YAPILDI=1
            break
        else
            return
        fi
    done
}

set_useraccount() {
    USERLOGIN_YAPILDI=$(get_option USERLOGIN)
    USERPASSWORD_YAPILDI=$(get_option USERPASSWORD)
    USERNAME_YAPILDI=$(get_option USERNAME)
    USERGROUPS_YAPILDI=$(get_option USERGROUPS)
    [ -z "$USERLOGIN_YAPILDI" ] && return
    [ -z "$USERPASSWORD_YAPILDI" ] && return
    [ -z "$USERNAME_YAPILDI" ] && return
    [ -z "$USERGROUPS_YAPILDI" ] && return
   
    #chroot $HEDEF useradd -m -G $(get_option USERGROUPS) -c "$(get_option USERNAME)" $(get_option USERLOGIN)
    useradd -R $HEDEF -m -G $(get_option USERGROUPS) -c "$(get_option USERNAME)" $(get_option USERLOGIN)
    #chroot $HEDEF echo "$(get_option USERLOGIN):$(get_option USERPASSWORD)" | chpasswd -R $HEDEF -c SHA512 
    echo "$(get_option USERLOGIN):$(get_option USERPASSWORD)" | chpasswd -R $HEDEF -c SHA512 
}

menu_bootloader() {
    while true; do
        DIALOG --title " $LANG_BOOTLOADER" \
            --menu "$MENULABEL" ${MENUSIZE} $(show_disks) none "$LANG_BOOTLOTHER"
        if [ $? -eq 0 ]; then
            set_option BOOTLOADER "$(cat $ANSWER)"
            BOOTLOADER_YAPILDI=1
            break
        else
            return
        fi
    done
    while true; do
        DIALOG --yesno "$LANG_BOOTLGRAPH" ${YESNOSIZE}
        if [ $? -eq 0 ]; then
            set_option TEXTCONSOLE 0
            break
        elif [ $? -eq 1 ]; then
            set_option TEXTCONSOLE 1
            break
        else
            return
        fi
    done
}

set_bootloader() {
    local dev=$(get_option BOOTLOADER) grub_args="--force "  
    
    if [ "$dev" = "none" ]; then return; fi

    # efi sistem ve efivar kontrolü
    if [ -n "$EFI_SYSTEM" ]; then
        grub_args="--force --target=$EFI_TARGET --efi-directory=/boot/efi --bootloader-id=boot --recheck"
        # efivarfs kernel modülü builtin geldiği varsayılıyor.
        # yoksa modprobe efivarfs 
        mount -t efivarfs efivarfs /sys/firmware/efi/efivars
        mount --bind /sys/firmware/efi/efivars $HEDEF/sys/firmware/efi/efivars
        chroot $HEDEF grub-install $grub_args $dev >>$LOG 2>&1
        cp $HEDEF/boot/efi/EFI/boot/grubx64.efi $HEDEF/boot/efi/EFI/boot/bootx64.efi
    else
		echo "`printf "$LANG_GRUBINST" "$grub_args $dev"`" >>$LOG
		chroot $HEDEF grub-install $grub_args $dev >>$LOG 2>&1
	fi
    if [ $? -ne 0 ]; then
        DIALOG --msgbox "`printf "$LANG_GRUBFAIL" "${BOLD}${RED}" "${RESET}" "$dev" "$LOG"`" ${MSGBOXSIZE}
        DIE 1
    fi
    echo "`printf "$LANG_GRUBMKCONF" "$HEDEF"`" >>$LOG
    chroot $HEDEF grub-mkconfig -o /boot/grub/grub.cfg >>$LOG 2>&1
    if [ $? -ne 0 ]; then
        DIALOG --msgbox "`printf "$LANG_GRUBMKCONFFAIL" "${BOLD}${RED}" "${RESET}" "$LOG"`" ${MSGBOXSIZE}
        DIE 1
    fi
}

validate_filesystems() {
    local mnts dev size fstype mntpt mkfs rootfound fmt
    local usrfound efi_system_partition

    unset TARGETFS
    mnts=$(grep -E '^MOUNTPOINT.*' $AYAR_DOSYASI)
    set -- ${mnts}
    while [ $# -ne 0 ]; do
        fmt=""
        dev=$2; fstype=$3; size=$4; mntpt="$5"; mkfs=$6
        shift 6

        if [ "$mntpt" = "/" ]; then
            rootfound=1
        elif [ "$mntpt" = "/usr" ]; then
            usrfound=1
        elif [ "$fstype" = "vfat" -a "$mntpt" = "/boot/efi" ]; then
            efi_system_partition=1
        fi
        if [ "$mkfs" -eq 1 ]; then
            fmt="$LANG_NEWFSYSTEM: "
        fi
        if [ -z "$TARGETFS" ]; then
            TARGETFS="`printf "$LANG_MOUNTEDON" "${fmt}$dev" "$size" "$mntpt" "${fstype}"`"
        else
            TARGETFS="`printf "$LANG_MOUNTEDON" "${TARGETFS}${fmt}${dev}" "$size" "$mntpt" "${fstype}"`"
        fi
    done
    if [ -z "$rootfound" ]; then
        DIALOG --msgbox "`printf "$LANG_FSYSTEMNOTSET" "${BOLD}${RED}" "${RESET}" `" ${MSGBOXSIZE}
        return 1
    elif [ -n "$usrfound" ]; then
        DIALOG --msgbox "`printf "$LANG_FSYSNOTSUPPORTED" "${BOLD}${RED}" "${RESET}"`" ${MSGBOXSIZE}
        return 1
    elif [ -n "$EFI_SYSTEM" -a -z "$efi_system_partition" ]; then
        DIALOG --msgbox "`printf "$LANG_FSYSEFINOTSET" "${BOLD}${RED}" "${RESET}"`" ${MSGBOXSIZE}
    fi
    FILESYSTEMS_YAPILDI=1
}

create_filesystems() {
    local mnts dev mntpt fstype fspassno mkfs size rv uuid

    mnts=$(grep -E '^MOUNTPOINT.*' $AYAR_DOSYASI)
    set -- ${mnts}
    while [ $# -ne 0 ]; do
        dev=$2; fstype=$3; mntpt="$5"; mkfs=$6
        shift 6

        # swap bölümleme
        if [ "$fstype" = "swap" ]; then
            swapoff $dev >/dev/null 2>&1
            if [ "$mkfs" -eq 1 ]; then
                mkswap $dev >>$LOG 2>&1
                if [ $? -ne 0 ]; then
                    if [ $SCRMODE == "text" ];then
						echo "$LANG_SWAPFAIL"
					else
						DIALOG --msgbox "`printf "$LANG_SWAPFAIL" "${BOLD}${RED}" "${RESET}" "$dev" "$LOG"`" ${MSGBOXSIZE}
                    fi
                    DIE 1
                fi
            fi
            swapon $dev >>$LOG 2>&1
            if [ $? -ne 0 ]; then
                if [ $SCRMODE == "text" ];then
					echo "$LANG_SWAPERROR"
				else
					DIALOG --msgbox "`printf "$LANG_SWAPERROR" "${BOLD}${RED}" "${RESET}" "$dev" "$LOG"`" ${MSGBOXSIZE}
                fi
                DIE 1
            fi
            # hedef fstaba girdi eklenmesi
            uuid=$(blkid -o value -s UUID "$dev")
            echo "UUID=$uuid none swap sw 0 0" >>$TARGET_FSTAB
            continue
        fi

        if [ "$mkfs" -eq 1 ]; then
            case "$fstype" in
            btrfs) MKFS="mkfs.btrfs -f"; modprobe btrfs >>$LOG 2>&1;;
            ext2) MKFS="mke2fs -F"; modprobe ext2 >>$LOG 2>&1;;
            ext3) MKFS="mke2fs -F -j"; modprobe ext3 >>$LOG 2>&1;;
            ext4) MKFS="mke2fs -F -t ext4"; modprobe ext4 >>$LOG 2>&1;;
            f2fs) MKFS="mkfs.f2fs -f"; modprobe f2fs >>$LOG 2>&1;;
            vfat) MKFS="mkfs.vfat -F32"; modprobe vfat >>$LOG 2>&1;;
            xfs) MKFS="mkfs.xfs -f"; modprobe xfs >>$LOG 2>&1;;
            esac
            TITLE="`printf "$LANG_ERRLOGTITLE" "$LOG"`"
            if [ $SCRMODE == "text" ];then
				echo "$LANG_CREATEFSYS"
			else
				INFOBOX "`printf "$LANG_CREATEFSYS" "$fstype" "$dev" "$mntpt"`" 8 60
            fi
            echo "`printf "$LANG_CREATEMKFS" "$MKFS $dev"`" >>$LOG
            # hedef disk bölümü bağlı olabilir, çözmek için
            mount | grep -q "$dev" && umount -l $dev
            $MKFS $dev >>$LOG 2>&1; rv=$?
            if [ $rv -ne 0 ]; then
                if [ $SCRMODE == "text" ];then
					echo "$LANG_CREATEFAIL"
				else
					DIALOG --msgbox "`printf "$LANG_CREATEFAIL" "${BOLD}${RED}" "${RESET}" "$fstype" "$dev" "$LOG"`" ${MSGBOXSIZE}
                fi
                DIE 1
            fi
        fi
        # rootfs nin bağlanması
        [ "$mntpt" != "/" ] && continue
        mkdir -p $HEDEF
        echo "`printf "$LANG_MOUNTINGON" "$dev" "$mntpt" "$fstype"`" >>$LOG
        mount -t $fstype $dev $HEDEF >>$LOG 2>&1
        if [ $? -ne 0 ]; then
            if [ $SCRMODE == "text" ];then
				echo "$LANG_MOUNTINGERR"
			else
				DIALOG --msgbox "`printf "$LANG_MOUNTINGERR" "${BOLD}${RED}" "${RESET}" "$dev" "${mntpt}" "$LOG"`" ${MSGBOXSIZE}
            fi
            DIE 1
        fi
        # hedef fstaba girdi eklenmesi
        uuid=$(blkid -o value -s UUID "$dev")
        if [ "$fstype" = "f2fs" ]; then
            fspassno=0
        else
            fspassno=1
        fi
        echo "UUID=$uuid $mntpt $fstype defaults 0 $fspassno" >>$TARGET_FSTAB
    done

    # dosya sistemlerinin hedefe bağlanması
    mnts=$(grep -E '^MOUNTPOINT.*' $AYAR_DOSYASI)
    set -- ${mnts}
    while [ $# -ne 0 ]; do
        dev=$2; fstype=$3; mntpt="$5"
        shift 6
        [ "$mntpt" = "/" -o "$fstype" = "swap" ] && continue
        mkdir -p ${HEDEF}${mntpt}
        echo "$LANG_MOUNTINGON" >>$LOG
        mount -t $fstype $dev ${HEDEF}${mntpt} >>$LOG 2>&1
        if [ $? -ne 0 ]; then
            if [ $SCRMODE == "text" ];then
				echo "$LANG_MOUNTINGERR"
			else
				DIALOG --msgbox "$LANG_MOUNTINGERR" ${MSGBOXSIZE}
            fi
            DIE
        fi
        # hedef fstaba girdi eklenmesi
        uuid=$(blkid -o value -s UUID "$dev")
        echo "UUID=$uuid $mntpt $fstype defaults 0 2" >>$TARGET_FSTAB
    done
}

mount_filesystems() {
    for f in sys proc dev; do
        [ ! -d $HEDEF/$f ] && mkdir $HEDEF/$f
        echo "Mounting $HEDEF/$f..." >>$LOG
        mount --bind /$f $HEDEF/$f >>$LOG 2>&1
    done
}

umount_filesystems() {
    local f

    for f in sys/fs/fuse/connections sys proc dev; do
        echo "Unmounting $HEDEF/$f..." >>$LOG
        umount $HEDEF/$f >>$LOG 2>&1
    done
    local mnts="$(grep -E '^MOUNTPOINT.*$' $AYAR_DOSYASI)"
    set -- ${mnts}
    while [ $# -ne 0 ]; do
        local dev=$2; local fstype=$3; local mntpt=$5
        shift 6
        if [ "$fstype" = "swap" ]; then
            echo "`printf "$LANG_SWAPDISABLING" "$dev" `" >>$LOG
            swapoff $dev >>$LOG 2>&1
            continue
        fi
        if [ "$mntpt" != "/" ]; then
            echo "`printf "$LANG_SWAPUNMOUNTING" "$HEDEF/$mntpt" `" >>$LOG
            umount $HEDEF/$mntpt >>$LOG 2>&1
        fi
    done
    echo "`printf "$LANG_SWAPUNMOUNTING" "$HEDEF"`" >>$LOG
    umount $HEDEF >>$LOG 2>&1
}

log_and_count() {
    local progress whole tenth
    while read line; do
        #echo "$line" >>$LOG
        copy_count=$((copy_count + 1))
        progress=$((1000 * copy_count / copy_total))
        if [ "$progress" != "$copy_progress" ]; then
            whole=$((progress / 10))
            tenth=$((progress % 10))
            printf "$LANG_PROGRESS" $whole $tenth $copy_count $copy_total
            copy_progress=$progress
        fi
        #echo "$copy_progress" >>$LOG
    done
}

copy_rootfs() {
    local tar_in="--create --one-file-system --xattrs"
    TITLE="`printf "$LANG_ERRLOGTITLE" "$LOG"`"
    if [ $SCRMODE == "text" ];then
		echo "$LANG_COUNTFILES"
    else
		INFOBOX "$LANG_COUNTFILES" 4 60
    fi
    copy_total=$(tar ${tar_in} -v -f /dev/null / 2>/dev/null | wc -l)
    export copy_total copy_count=0 copy_progress=
    clear
    if [ $SCRMODE == "text" ];then
		tar ${tar_in} -f - / 2>/dev/null | tar --extract --xattrs --xattrs-include='*' --preserve-permissions -v -f - -C $HEDEF | log_and_count
    else
		tar ${tar_in} -f - / 2>/dev/null | tar --extract --xattrs --xattrs-include='*' --preserve-permissions -v -f - -C $HEDEF | log_and_count | DIALOG --title "${TITLE}" --progressbox "$LANG_CPLIVEIMG" 5 60
    fi
    if [ $? -ne 0 ]; then
        DIE 1
    fi
    unset copy_total copy_count copy_percent
}

menu_install() {
    # dosya sistemi hazır değilse devam edilmeyecek.
    validate_filesystems || return 1

    ROOTPASSWORD_YAPILDI="$(get_option ROOTPASSWORD)"
    BOOTLOADER_YAPILDI="$(get_option BOOTLOADER)"

    if [ -z "$FILESYSTEMS_YAPILDI" ]; then
        if [ $SCRMODE == "text" ];then
			echo "$LANG_FSYSNOTCONF"
		else	
			DIALOG --msgbox "`printf "$LANG_FSYSNOTCONF" "${BOLD}" "${RESET}"`" ${MSGBOXSIZE}
        fi
        return 1
    elif [ -z "$ROOTPASSWORD_YAPILDI" ]; then
        if [ $SCRMODE == "text" ];then
			echo "$LANG_ROOTPWNOTCONF"
		else
			DIALOG --msgbox "`printf "$LANG_ROOTPWNOTCONF" "${BOLD}" "${RESET}"`" ${MSGBOXSIZE}
        fi
        return 1
    elif [ -z "$BOOTLOADER_YAPILDI" ]; then
        if [ $SCRMODE == "text" ];then
			echo "$LANG_BOOTLNOTCONF"
		else
			DIALOG --msgbox "`printf "$LANG_BOOTLNOTCONF" "${BOLD}" "${RESET}"`" ${MSGBOXSIZE}
        fi
        return 1
    fi
    
    if [ -z "$FORMAT_ONAY" ]; then
		DIALOG --yesno "`printf "$LANG_DESTROYWARN" "${BOLD}" "${RESET}" "${BOLD}${TARGETFS}${RESET}" "${BOLD}${RED}" "${RESET}" "${BOLD}" "${RESET}"`" 20 80 || return
    fi
    unset TARGETFS

    # Dosya sistemlerinin oluşturulup-bağlanması
    create_filesystems
    
    # ağdan paket kurulum eklenecek.
	KAYNAK="YEREL"
   
    if [ $KAYNAK="YEREL" ]; then
        # dosya sisteminin kopyalanması
        copy_rootfs
        
        USERNAME=$CANLI_KULLANICI
        # Canlı kulanıcının silinmesi root değilse
        if [ $USERNAME != "root" ];then
			echo "`printf "$LANG_RMTARGET" "$USERNAME"`" >>$LOG
			chroot $HEDEF userdel -r $USERNAME >>$LOG 2>&1
			sed -i -e "/$USERNAME ALL=.*/d" $HEDEF/etc/sudoers
		fi
		TITLE="`printf "$LANG_ERRLOGTITLE" "$LOG"`"
		if [ $SCRMODE == "text" ];then
			echo "$LANG_BUILDINGINITRAMFS"
		else
			INFOBOX "$LANG_BUILDINGINITRAMFS" 4 60
		fi
		echo "$LANG_BUILDINGINITRAMFS" >>$LOG
        # gerekli dosya istemlerinin bağlanması
        mount_filesystems
       
        rm -f $HEDEF/boot/initramfs*
        rm -f $HEDEF/boot/initrd*
        rm -f $HEDEF/boot/kernel*
        cp /boot/kernel-* $HEDEF/boot/
        
        local sonek="milis"
        local kversion=`ls $HEDEF/boot/kernel-* | xargs -I {} basename {} | head -n1 |cut -d'-' -f2`
        chroot $HEDEF dracut --no-hostonly --xz --omit systemd --add-drivers "ahci" -f /boot/initrd.img-${kversion} $kversion-$sonek --force >>$LOG 2>&1
        #chroot $HEDEF ln -s /boot/kernel-* /boot/kernel
        rmdir $HEDEF/mnt/target
    fi
	
	if [ $SCRMODE == "text" ];then
		echo "$LANG_APPLYSETTINGS"
	else
		INFOBOX "$LANG_APPLYSETTINGS" 4 60
	fi
    # fstab ın hedef diske kopyalanması
    install -Dm644 $TARGET_FSTAB $HEDEF/etc/fstab
    
    # /tmp in tmpfs olarak bağlanması - milis2 de sorun verdi. ln: creating hard link `/usr/bin/abc' => `/tmp/abc#123/usr/bin/abc': Invalid cross-device link
    # echo "tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0" >> $HEDEF/etc/fstab


    # keymap, bölgesel ve yerel zaman ayarları, hostname, root-kullanıcı şifre
    #set_keymap
    set_locale
    set_timezone
    set_hostname
    set_rootpassword
    set_useraccount

    # Kullanıcı ve root için öntanımlı ayarların kopyalanması
    #cp $HEDEF/etc/skel/.[bix]* $HEDEF/root
    USERLOGIN="$(get_option USERLOGIN)"
    mkdir -p $HEDEF/home/$USERLOGIN/
    # todo!!! kull. ayarları updates/skel altından alınacak.
    # todo!!! alias mps
    # todo!!! source /etc/profile
    if [ $CANLI_KULLANICI == "root" ];then
		[ -d /root/.config ] && cp -rf /root/.config  $HEDEF/home/$USERLOGIN/
		[ -f /root/.gitconfig ] && cp -f /root/.gitconfig  $HEDEF/home/$USERLOGIN/
		[ -f /root/.xinitrc ] && cp -rf /root/.xinitrc  $HEDEF/home/$USERLOGIN/
		[ -f /root/.bashrc ] && cp -f /root/.bashrc  $HEDEF/home/$USERLOGIN/
		[ -f /root/.jwmrc ] && cp -rf /root/.jwmrc  $HEDEF/home/$USERLOGIN/
		if [ -d /run/initramfs/live/updates/root ];then
			cp -rf /run/initramfs/live/updates/root/.  $HEDEF/etc/skel/
		    cp -rf /run/initramfs/live/updates/root/. $HEDEF/home/$USERLOGIN/
		fi
    else
		cp -rf /home/$CANLI_KULLANICI/.config  $HEDEF/home/$USERLOGIN
		cp -rf /run/initramfs/live/updates/home/$CANLI_KULLANICI/.  $HEDEF/etc/skel/
		cp -rf /run/initramfs/live/updates/home/$CANLI_KULLANICI/. $HEDEF/home/$USERLOGIN/
    fi
    
    # kurulum özgü dosyaların silinmesi
	rm -f $HEDEF/root/bin/canli_kullanici.sh
	rm -rf $HEDEF/etc/canli_kullanici
	rm -rf $HEDEF/opt/Milis-Yukleyici
	rm -f $HEDEF/root/Desktop/kurulum.desktop
	rm -f $HEDEF/root/Masaüstü/kurulum.desktop
	rm -f $HEDEF/home/$USERLOGIN/Desktop/kurulum.desktop
	rm -f $HEDEF/home/$USERLOGIN/Masaüstü/kurulum.desktop
	rm -f $HEDEF/root/Masaüstü/milis-kur.desktop
	rm -f $HEDEF/etc/shadow- $HEDEF/etc/gshadow- $HEDEF/etc/passwd- $HEDEF/etc/group-
	#sed -i "/^$USERLOGIN/d" $HEDEF/etc/security/opasswd
	[ -f $HEDEF/etc/lightdm/lightdm.conf.orj ] && cp $HEDEF/etc/lightdm/lightdm.conf.orj $HEDEF/etc/lightdm/lightdm.conf
    
    YDIL="$(echo "$(get_option LOCALE)" | tr "." "\n" | head -n1)"
    echo "$YDIL" > $HEDEF/home/$USERLOGIN/.config/user-dirs.locale
    # dil Türkçe ise kullanıcı dizinlerindeki Türkçe adlandırmanın düzeltilmesi
  
    set_keymap 
    
    chroot $HEDEF  chown $USERLOGIN:$USERLOGIN -R /home/$USERLOGIN
    rm -f $HEDEF/home/$USERLOGIN/.config/user-dirs.dirs
    
	[ -d $HEDEF/dev/snd ] && chroot $HEDEF  setfacl -m u:$USERLOGIN:rw /dev/snd/*
	
    if [ -f $HEDEF/etc/sudoers ]; then
        
        if [ -z "$(echo $(get_option USERGROUPS) | grep -w wheel)" -a -n "$USERLOGIN" ]; then
            # wheel grubuna üye olamayan kullanıcı için sudo açılır.
            echo "# `printf "$LANG_ENABLESUDO" "$USERLOGIN"`" >> $HEDEF/etc/sudoers
            echo "$USERLOGIN ALL=(ALL) ALL" >> $HEDEF/etc/sudoers
        else
            # wheel grubuna üye olan kullanıcı için sudoers eklemesi yapılır.
            sed -i $HEDEF/etc/sudoers \
                -e "s;#.*%wheel ALL=(ALL) ALL;%wheel ALL=(ALL) ALL;"
        fi
        unset USERLOGIN
    fi
    
    # Text tabanlı açılışı aktif et seçiliyse
    if [ "$(get_option TEXTCONSOLE)" = "1" ]; then
        sed -i $HEDEF/etc/default/grub \
            -e 's|#\(GRUB_TERMINAL_INPUT\).*|\1=console|' \
            -e 's|#\(GRUB_TERMINAL_OUTPUT\).*|\1=console|'
    fi

    # Bootloader yüklemesi
    set_bootloader
    sync && sync && sync

    # bağlanan dizinler çözülür
    umount_filesystems

    # sistemin kopyalandıktan sonra yebaşla sorusu
    if [ $SCRMODE == "text" ];then
		echo "OK"
		return
	else
		if [ -z "$YEBASLAT_ONAY" ]; then
			DIALOG --yesno "`printf "$LANG_INSTALLSUCCESS" "${BOLD}" "${RESET}"`" ${YESNOSIZE}
			if [ $? -eq 0 ]; then
				shutdown -r now
			else
				return
			fi
		fi
    fi
}

menu() {
    if [ -z "$DEFITEM" ]; then
        DEFITEM="$LANG_MENUKEYBOARD"
    fi

	DIALOG --default-item $DEFITEM \
		--extra-button --extra-label "$LANG_MENUSETTINGS" \
		--title " $LANG_INSTMENU " \
		--menu "$MENULABEL" 10 70 0 \
		"$LANG_MENUKEYBOARD" "$LANG_KEYBOARDSET" \
		"$LANG_MENUHOSTNAME" "$LANG_HOSTSET" \
		"$LANG_MENULOCALE" "$LANG_LOCALESET" \
		"$LANG_MENUTIMEZONE" "$LANG_TIMEZONESET" \
		"$LANG_MENUROOTPW" "$LANG_ROOTPWSET" \
		"$LANG_MENUUSERACC" "$LANG_USERNPWSET" \
		"$LANG_MENUBOOTLOADER" "$LANG_BOOTLOADERSET" \
		"$LANG_MENUPARTITION" "$LANG_PARTITIONSET" \
		"$LANG_MENUFILESYSTEM" "$LANG_FSYSSET" \
		"$LANG_MENUINSTALL" "$LANG_INSTALLSETTINGS" \
		"$LANG_MENUEXIT" "$LANG_EXITINST"

    if [ $? -eq 3 ]; then
        # Ayarların gösterilmesi
        cp $AYAR_DOSYASI /tmp/conf_hidden.$$;
        sed -i "s/^ROOTPASSWORD.*/ROOTPASSWORD <-hidden->/" /tmp/conf_hidden.$$
        DIALOG --title "$LANG_SAVEDSETTINGS" --textbox /tmp/conf_hidden.$$ 18 90
        rm /tmp/conf_hidden.$$
        return
    fi

    case $(cat $ANSWER) in
        "$LANG_MENUKEYBOARD") menu_keymap && [ -n "$KEYBOARD_YAPILDI" ] && DEFITEM="$LANG_MENUHOSTNAME";;
        "$LANG_MENUHOSTNAME") menu_hostname && [ -n "$HOSTNAME_YAPILDI" ] && DEFITEM="$LANG_MENULOCALE";;
        "$LANG_MENULOCALE") menu_locale && [ -n "$LOCALE_YAPILDI" ] && DEFITEM="$LANG_MENUTIMEZONE";;
        "$LANG_MENUTIMEZONE") menu_timezone && [ -n "$TIMEZONE_YAPILDI" ] && DEFITEM="$LANG_MENUROOTPW";;
        "$LANG_MENUROOTPW") menu_rootpassword && [ -n "$ROOTPASSWORD_YAPILDI" ] && DEFITEM="$LANG_MENUUSERACC";;
        "$LANG_MENUUSERACC") menu_useraccount && [ -n "$USERNAME_YAPILDI" ] && [ -n "$USERPASSWORD_YAPILDI" ] && DEFITEM="$LANG_MENUBOOTLOADER";;
        "$LANG_MENUBOOTLOADER") menu_bootloader && [ -n "$BOOTLOADER_YAPILDI" ] && DEFITEM="$LANG_MENUPARTITION";;
        "$LANG_MENUPARTITION") menu_partitions && [ -n "$PARTITIONS_YAPILDI" ] && DEFITEM="$LANG_MENUFILESYSTEM";;
        "$LANG_MENUFILESYSTEM") menu_filesystems && [ -n "$FILESYSTEMS_YAPILDI" ] && DEFITEM="$LANG_MENUINSTALL";;
        "$LANG_MENUINSTALL") menu_install;;
        "$LANG_MENUEXIT") DIE;;
        *) DIALOG --yesno "$LANG_ABORTINST" ${YESNOSIZE} && DIE
    esac
}

if [ ! -x /bin/dialog ]; then
    echo "$LANG_ERRDIALOG"
    exit 1
fi

if [ "$(id -u)" != "0" ]; then
   echo "$LANG_INSTMUSTROOT" 1>&2
   exit 1
fi

#
# kuruluma giriş noktası - eğer kurulum ayar dosyası parametre verilirse direk kuruluma başlayacak.
#
[ ! -z $DOSYADAN_KURULUM ] && menu_install && exit 0
DIALOG --title "${BOLD}${RED} $LANG_ENTERMILIS ${RESET}" --msgbox "`printf "$LANG_MAINDIALOG" "${BOLD}" "${RESET}" "${BOLD}" "${RESET}" "${BOLD}" "${RESET}" "${BOLD}" "${RESET}"`" 16 80

while true; do
    menu
done

exit 0