123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228 |
- // Copyright 2010 The Go Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style
- // license that can be found in the LICENSE file.
- // +build darwin dragonfly freebsd linux nacl netbsd openbsd solaris windows
- package net
- import (
- "syscall"
- "time"
- )
- // BUG(mikio): On every POSIX platform, reads from the "ip4" network
- // using the ReadFrom or ReadFromIP method might not return a complete
- // IPv4 packet, including its header, even if there is space
- // available. This can occur even in cases where Read or ReadMsgIP
- // could return a complete packet. For this reason, it is recommended
- // that you do not uses these methods if it is important to receive a
- // full packet.
- //
- // The Go 1 compatibility guidelines make it impossible for us to
- // change the behavior of these methods; use Read or ReadMsgIP
- // instead.
- func sockaddrToIP(sa syscall.Sockaddr) Addr {
- switch sa := sa.(type) {
- case *syscall.SockaddrInet4:
- return &IPAddr{IP: sa.Addr[0:]}
- case *syscall.SockaddrInet6:
- return &IPAddr{IP: sa.Addr[0:], Zone: zoneToString(int(sa.ZoneId))}
- }
- return nil
- }
- func (a *IPAddr) family() int {
- if a == nil || len(a.IP) <= IPv4len {
- return syscall.AF_INET
- }
- if a.IP.To4() != nil {
- return syscall.AF_INET
- }
- return syscall.AF_INET6
- }
- func (a *IPAddr) isWildcard() bool {
- if a == nil || a.IP == nil {
- return true
- }
- return a.IP.IsUnspecified()
- }
- func (a *IPAddr) sockaddr(family int) (syscall.Sockaddr, error) {
- if a == nil {
- return nil, nil
- }
- return ipToSockaddr(family, a.IP, 0, a.Zone)
- }
- // IPConn is the implementation of the Conn and PacketConn interfaces
- // for IP network connections.
- type IPConn struct {
- conn
- }
- func newIPConn(fd *netFD) *IPConn { return &IPConn{conn{fd}} }
- // ReadFromIP reads an IP packet from c, copying the payload into b.
- // It returns the number of bytes copied into b and the return address
- // that was on the packet.
- //
- // ReadFromIP can be made to time out and return an error with
- // Timeout() == true after a fixed time limit; see SetDeadline and
- // SetReadDeadline.
- func (c *IPConn) ReadFromIP(b []byte) (int, *IPAddr, error) {
- if !c.ok() {
- return 0, nil, syscall.EINVAL
- }
- // TODO(cw,rsc): consider using readv if we know the family
- // type to avoid the header trim/copy
- var addr *IPAddr
- n, sa, err := c.fd.readFrom(b)
- switch sa := sa.(type) {
- case *syscall.SockaddrInet4:
- addr = &IPAddr{IP: sa.Addr[0:]}
- if len(b) >= IPv4len { // discard ipv4 header
- hsize := (int(b[0]) & 0xf) * 4
- copy(b, b[hsize:])
- n -= hsize
- }
- case *syscall.SockaddrInet6:
- addr = &IPAddr{IP: sa.Addr[0:], Zone: zoneToString(int(sa.ZoneId))}
- }
- return n, addr, err
- }
- // ReadFrom implements the PacketConn ReadFrom method.
- func (c *IPConn) ReadFrom(b []byte) (int, Addr, error) {
- if !c.ok() {
- return 0, nil, syscall.EINVAL
- }
- n, addr, err := c.ReadFromIP(b)
- return n, addr.toAddr(), err
- }
- // ReadMsgIP reads a packet from c, copying the payload into b and the
- // associated out-of-band data into oob. It returns the number of
- // bytes copied into b, the number of bytes copied into oob, the flags
- // that were set on the packet and the source address of the packet.
- func (c *IPConn) ReadMsgIP(b, oob []byte) (n, oobn, flags int, addr *IPAddr, err error) {
- if !c.ok() {
- return 0, 0, 0, nil, syscall.EINVAL
- }
- var sa syscall.Sockaddr
- n, oobn, flags, sa, err = c.fd.readMsg(b, oob)
- switch sa := sa.(type) {
- case *syscall.SockaddrInet4:
- addr = &IPAddr{IP: sa.Addr[0:]}
- case *syscall.SockaddrInet6:
- addr = &IPAddr{IP: sa.Addr[0:], Zone: zoneToString(int(sa.ZoneId))}
- }
- return
- }
- // WriteToIP writes an IP packet to addr via c, copying the payload
- // from b.
- //
- // WriteToIP can be made to time out and return an error with
- // Timeout() == true after a fixed time limit; see SetDeadline and
- // SetWriteDeadline. On packet-oriented connections, write timeouts
- // are rare.
- func (c *IPConn) WriteToIP(b []byte, addr *IPAddr) (int, error) {
- if !c.ok() {
- return 0, syscall.EINVAL
- }
- if c.fd.isConnected {
- return 0, &OpError{Op: "write", Net: c.fd.net, Addr: addr, Err: ErrWriteToConnected}
- }
- if addr == nil {
- return 0, &OpError{Op: "write", Net: c.fd.net, Addr: nil, Err: errMissingAddress}
- }
- sa, err := addr.sockaddr(c.fd.family)
- if err != nil {
- return 0, &OpError{"write", c.fd.net, addr, err}
- }
- return c.fd.writeTo(b, sa)
- }
- // WriteTo implements the PacketConn WriteTo method.
- func (c *IPConn) WriteTo(b []byte, addr Addr) (int, error) {
- if !c.ok() {
- return 0, syscall.EINVAL
- }
- a, ok := addr.(*IPAddr)
- if !ok {
- return 0, &OpError{"write", c.fd.net, addr, syscall.EINVAL}
- }
- return c.WriteToIP(b, a)
- }
- // WriteMsgIP writes a packet to addr via c, copying the payload from
- // b and the associated out-of-band data from oob. It returns the
- // number of payload and out-of-band bytes written.
- func (c *IPConn) WriteMsgIP(b, oob []byte, addr *IPAddr) (n, oobn int, err error) {
- if !c.ok() {
- return 0, 0, syscall.EINVAL
- }
- if c.fd.isConnected {
- return 0, 0, &OpError{Op: "write", Net: c.fd.net, Addr: addr, Err: ErrWriteToConnected}
- }
- if addr == nil {
- return 0, 0, &OpError{Op: "write", Net: c.fd.net, Addr: nil, Err: errMissingAddress}
- }
- sa, err := addr.sockaddr(c.fd.family)
- if err != nil {
- return 0, 0, &OpError{"write", c.fd.net, addr, err}
- }
- return c.fd.writeMsg(b, oob, sa)
- }
- // DialIP connects to the remote address raddr on the network protocol
- // netProto, which must be "ip", "ip4", or "ip6" followed by a colon
- // and a protocol number or name.
- func DialIP(netProto string, laddr, raddr *IPAddr) (*IPConn, error) {
- return dialIP(netProto, laddr, raddr, noDeadline)
- }
- func dialIP(netProto string, laddr, raddr *IPAddr, deadline time.Time) (*IPConn, error) {
- net, proto, err := parseNetwork(netProto)
- if err != nil {
- return nil, &OpError{Op: "dial", Net: netProto, Addr: raddr, Err: err}
- }
- switch net {
- case "ip", "ip4", "ip6":
- default:
- return nil, &OpError{Op: "dial", Net: netProto, Addr: raddr, Err: UnknownNetworkError(netProto)}
- }
- if raddr == nil {
- return nil, &OpError{Op: "dial", Net: netProto, Addr: nil, Err: errMissingAddress}
- }
- fd, err := internetSocket(net, laddr, raddr, deadline, syscall.SOCK_RAW, proto, "dial")
- if err != nil {
- return nil, &OpError{Op: "dial", Net: netProto, Addr: raddr, Err: err}
- }
- return newIPConn(fd), nil
- }
- // ListenIP listens for incoming IP packets addressed to the local
- // address laddr. The returned connection's ReadFrom and WriteTo
- // methods can be used to receive and send IP packets with per-packet
- // addressing.
- func ListenIP(netProto string, laddr *IPAddr) (*IPConn, error) {
- net, proto, err := parseNetwork(netProto)
- if err != nil {
- return nil, &OpError{Op: "dial", Net: netProto, Addr: laddr, Err: err}
- }
- switch net {
- case "ip", "ip4", "ip6":
- default:
- return nil, &OpError{Op: "listen", Net: netProto, Addr: laddr, Err: UnknownNetworkError(netProto)}
- }
- fd, err := internetSocket(net, laddr, nil, noDeadline, syscall.SOCK_RAW, proto, "listen")
- if err != nil {
- return nil, &OpError{Op: "listen", Net: netProto, Addr: laddr, Err: err}
- }
- return newIPConn(fd), nil
- }
|