#4 Limitation of VL671+vl671.rom USB2HS/USB3 Streaming < 210Mbps

开启中
bvernoux6 月之前创建 · 0 条评论
bvernoux 评论于 6 月之前

Hi Yifeng Li,

Thanks for your amazing open source project !! I have built few boards with VL671-Q4 that I have modified (USB-A to USB-A more compact with enhanced routing for USB3 Host & USB2 HS impedance/length/matching ...) Anyway I'm quite disappointed by the performance of the VL671-Q4 with the vl671.rom firmware blob (https://gitlab.com/niconicon1/vl670-firmware/-/raw/master/vl671.rom) which seem to be limited to <210Mbps to do USB2 HS to USB3 Transfer tested with an SDR with 10MHz IQ 16bits and speed of 320Mbps or even in packing mode(12bits) to 240Mbps in both case the VL671-Q4(with actual Firmware vl671.rom) limit the maximum USB2 HS speed to <210Mbps.

Do you think there is something to do to improve the maximum USB2 HS speed (to reach up to 320Mbps) ? (Do you have done some research on the vl671.rom firmware that you can share ?)

Hi Yifeng Li, Thanks for your amazing open source project !! I have built few boards with VL671-Q4 that I have modified (USB-A to USB-A more compact with enhanced routing for USB3 Host & USB2 HS impedance/length/matching ...) Anyway I'm quite disappointed by the performance of the VL671-Q4 with the vl671.rom firmware blob (https://gitlab.com/niconicon1/vl670-firmware/-/raw/master/vl671.rom) which seem to be limited to <210Mbps to do USB2 HS to USB3 Transfer tested with an SDR with 10MHz IQ 16bits and speed of 320Mbps or even in packing mode(12bits) to 240Mbps in both case the VL671-Q4(with actual Firmware vl671.rom) limit the maximum USB2 HS speed to <210Mbps. Do you think there is something to do to improve the maximum USB2 HS speed (to reach up to 320Mbps) ? (Do you have done some research on the vl671.rom firmware that you can share ?)
登录 并参与到对话中。
未选择标签
未选择里程碑
未指派成员
1 名参与者
正在加载...
取消
保存
这个人很懒,什么都没留下。