123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188 |
- @node Indentation, Text, Major Modes, Top
- @chapter Indentation
- @cindex indentation
- @c WideCommands
- @table @kbd
- @item @key{TAB}
- Indent current line ``appropriately'' in a mode-dependent fashion.
- @item @key{LFD}
- Perform @key{RET} followed by @key{TAB} (@code{newline-and-indent}).
- @item M-^
- Merge two lines (@code{delete-indentation}). This would cancel out
- the effect of @key{LFD}.
- @item C-M-o
- Split line at point; text on the line after point becomes a new line
- indented to the same column that it now starts in (@code{split-line}).
- @item M-m
- Move (forward or back) to the first non-blank character on the current
- line (@code{back-to-indentation}).
- @item C-M-\
- Indent several lines to same column (@code{indent-region}).
- @item C-x @key{TAB}
- Shift block of lines rigidly right or left (@code{indent-rigidly}).
- @item M-i
- Indent from point to the next prespecified tab stop column
- (@code{tab-to-tab-stop}).
- @item M-x indent-relative
- Indent from point to under an indentation point in the previous line.
- @end table
- @kindex TAB
- @cindex indentation
- Most programming languages have some indentation convention. For Lisp
- code, lines are indented according to their nesting in parentheses. The
- same general idea is used for C code, though details differ.
- Use the @key{TAB} command to indent a line whatever the language.
- Each major mode defines this command to perform indentation appropriate
- for the particular language. In Lisp mode, @key{TAB} aligns a line
- according to its depth in parentheses. No matter where in the line you
- are when you type @key{TAB}, it aligns the line as a whole. In C mode,
- @key{TAB} implements a subtle and sophisticated indentation style that
- knows about many aspects of C syntax.
- @kindex TAB
- In Text mode, @key{TAB} runs the command @code{tab-to-tab-stop}, which
- indents to the next tab stop column. You can set the tab stops with
- @kbd{M-x edit-tab-stops}.
- @menu
- * Indentation Commands:: Various commands and techniques for indentation.
- * Tab Stops:: You can set arbitrary "tab stops" and then
- indent to the next tab stop when you want to.
- * Just Spaces:: You can request indentation using just spaces.
- @end menu
- @node Indentation Commands, Tab Stops, Indentation, Indentation
- @section Indentation Commands and Techniques
- @c ??? Explain what Emacs has instead of space-indent-flag.
- If you just want to insert a tab character in the buffer, you can type
- @kbd{C-q @key{TAB}}.
- @kindex M-m
- @findex back-to-indentation
- To move over the indentation on a line, type @kbd{Meta-m}
- (@code{back-to-indentation}). This command, given anywhere on a line,
- positions point at the first non-blank character on the line.
- To insert an indented line before the current line, type @kbd{C-a C-o
- @key{TAB}}. To make an indented line after the current line, use
- @kbd{C-e @key{LFD}}.
- @kindex C-M-o
- @findex split-line
- @kbd{C-M-o} (@code{split-line}) moves the text from point to the end of
- the line vertically down, so that the current line becomes two lines.
- @kbd{C-M-o} first moves point forward over any spaces and tabs. Then it
- inserts after point a newline and enough indentation to reach the same
- column point is on. Point remains before the inserted newline; in this
- regard, @kbd{C-M-o} resembles @kbd{C-o}.
- @kindex M-\
- @kindex M-^
- @findex delete-horizontal-space
- @findex delete-indentation
- To join two lines cleanly, use the @kbd{Meta-^}
- (@code{delete-indentation}) command to delete the indentation at the
- front of the current line, and the line boundary as well. Empty spaces
- are replaced by a single space, or by no space if at the beginning of a
- line, before a close parenthesis, or after an open parenthesis.
- To delete just the indentation of a line, go to the beginning of the
- line and use @kbd{Meta-\} (@code{delete-horizontal-space}), which
- deletes all spaces and tabs around the cursor.
- @kindex C-M-\
- @kindex C-x TAB
- @findex indent-region
- @findex indent-rigidly
- There are also commands for changing the indentation of several lines at
- once. @kbd{Control-Meta-\} (@code{indent-region}) gives each line which
- begins in the region the ``usual'' indentation by invoking @key{TAB} at the
- beginning of the line. A numeric argument specifies the column to indent
- to. Each line is shifted left or right so that its first non-blank
- character appears in that column. @kbd{C-x @key{TAB}}
- (@code{indent-rigidly}) moves all the lines in the region right by its
- argument (left, for negative arguments). The whole group of lines moves
- rigidly sideways, which is how the command gets its name.@refill
- @findex indent-relative
- @kbd{M-x indent-relative} indents at point based on the previous line
- (actually, the last non-empty line.) It inserts whitespace at point, moving
- point, until it is underneath an indentation point in the previous line.
- An indentation point is the end of a sequence of whitespace or the end of
- the line. If point is farther right than any indentation point in the
- previous line, the whitespace before point is deleted and the first
- indentation point then applicable is used. If no indentation point is
- applicable even then, @code{tab-to-tab-stop} is run (see next section).
- @code{indent-relative} is the definition of @key{TAB} in Indented Text
- mode. @xref{Text}.
- @node Tab Stops, Just Spaces, Indentation Commands, Indentation
- @section Tab Stops
- @kindex M-i
- @findex tab-to-tab-stop
- For typing in tables, you can use Text mode's definition of @key{TAB},
- @code{tab-to-tab-stop}. This command inserts indentation before point,
- enough to reach the next tab stop column. Even if you are not in Text mode,
- this function is associated with @kbd{M-i} anyway.
- @findex edit-tab-stops
- @findex edit-tab-stops-note-changes
- @kindex C-c C-c (Edit Tab Stops)
- @vindex tab-stop-list
- You can arbitrarily set the tab stops used by @kbd{M-i}. They are
- stored as a list of column-numbers in increasing order in the variable
- @code{tab-stop-list}.
- The convenient way to set the tab stops is using @kbd{M-x edit-tab-stops},
- which creates and selects a buffer containing a description of the tab stop
- settings. You can edit this buffer to specify different tab stops, and
- then type @kbd{C-c C-c} to make those new tab stops take effect. In the
- tab stop buffer, @kbd{C-c C-c} runs the function
- @code{edit-tab-stops-note-changes} rather than the default
- @code{save-buffer}. @code{edit-tab-stops} records which buffer was current
- when you invoked it, and stores the tab stops in that buffer. Normally
- all buffers share the same tab stops and changing them in one buffer
- affects all. If you make @code{tab-stop-list} local in one
- buffer @code{edit-tab-stops} in that buffer edits only the local
- settings.
- Below is the text representing ordinary tab stops every eight columns:
- @example
- : : : : : :
- 0 1 2 3 4
- 0123456789012345678901234567890123456789012345678
- To install changes, type C-c C-c
- @end example
- The first line contains a colon at each tab stop. The remaining lines
- help you see where the colons are and tell you what to do.
- Note that the tab stops that control @code{tab-to-tab-stop} have nothing
- to do with displaying tab characters in the buffer. @xref{Display Vars},
- for more information on that.
- @node Just Spaces,, Tab Stops, Indentation
- @section Tabs vs. Spaces
- @vindex indent-tabs-mode
- Emacs normally uses both tabs and spaces to indent lines. If you prefer,
- all indentation can be made from spaces only. To request this, set
- @code{indent-tabs-mode} to @code{nil}. This is a per-buffer variable;
- altering the variable affects only the current buffer, but there is a
- default value which you can change as well. @xref{Locals}.
- @findex tabify
- @findex untabify
- There are also commands to convert tabs to spaces or vice versa, always
- preserving the columns of all non-blank text. @kbd{M-x tabify} scans the
- region for sequences of spaces, and converts sequences of at least three
- spaces to tabs if that is possible without changing indentation. @kbd{M-x
- untabify} changes all tabs in the region to corresponding numbers of spaces.
|