Halaman utama Jelajahi Bantuan
Masuk
milan
/
usl-mm
cermin dari https://git.my-web.xyz/milan/usl-mm.git
Liatin 1
Bintangi 0
Fork 0
Berkas Masalah 0 Wiki

MIrror of Universal secure LXD Install script

Cabang: master
Ranting Tag
usl-mm
ZIP TAR.GZ
milan 78f524854d Aktualizovat README.md 1 hari lalu
README.md 78f524854d Aktualizovat README.md 1 hari lalu
copy_containers d96d93bdd8 little_fixes 2 tahun lalu
license.txt dc4b370c03 first 6 tahun lalu
setup-usl-mm a531ae0d09 Aktualizovat setup-usl-mm 1 hari lalu
setup-usl-mm_install_requirements 456f7ab71a eoan 5 tahun lalu
zfs-backup-mm-example-config 46874ecef2 example conf for zfs-backup-mm script and copy_containers is now compatible for instalations, where is my backup-script used 4 tahun lalu

README.md

Features:

copy_containers -> script for easy bulk container migrate via SSH between instalations of usl-mm, is also possible use it in non-interactive mode with parameters in this order: container-name, destination-host, destination-port(optional)

zfs-backup-mm-example-config -> example config for zfs-backup-mm script, that backup all running containers, except those with "testing" or "deluge "in container name.

setup-usl-mm_install_requirements -> install dialog utility

setup-usl-mm

  1. Pre-reboot script -> install zfs-utils, change timezone to Prague, crypt swap partition with ecryptfs-utils, crypt some partition with dmcrypt to use with /var/snap/lxd/common/lxd/* and LXD ZFS storage, add some config to sysctl.conf, disable snapd.lxd service, delete everything in /var/snap/lxd/common/lxd/*, delete netplan, install ifupdown, configure bridged networking (you can put LXD container to your network simple by add br0 to container), create zpool with ashift=12, set compression=on on crypted zpool, configure zfs cache min 256MB max 1536MB, do dist-upgrade, create /root/onstart script to decrypt crypted parition with password and start lxd (you need start this script on every reboot), reboot

  2. Post-reboot script -> for sure, stop snapd.lxd service and delete everything in /var/snap/lxd/common/lxd/*, exec /root/onstart to decrypt partition and import zpool, configure LXD to use encrypted partition as storage, add some config to /root/.screenrc (for gnuscreen utility), install htop mc zfsnap smartmontools screen and pv

  3. Install uptrack-upgrade -> install ksplice tool for kernel live patching

Requirements:

Fresh installation of Ubuntu 22.04, swap partition and some paritition to crypted data

THE PROGRAM IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, BUT WITHOUT ANY WARRANTY. IT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW THE AUTHOR WILL BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.