| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091 |
- """
- # TOP2049 Open Source programming suite
- #
- # Microchip PIC16F1936 dip28
- #
- # Copyright (c) 2013 Pavel Stemberk <stemberk@gmail.com>
- #
- # This program is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation; either version 2 of the License, or
- # (at your option) any later version.
- #
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- # GNU General Public License for more details.
- #
- # You should have received a copy of the GNU General Public License along
- # with this program; if not, write to the Free Software Foundation, Inc.,
- # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- """
- from .microchip8_splittedPMarea_hasResetPC import *
- class Chip_Pic16F1936dip28(microchip8_splittedPMarea_hasResetPC):
-
- nLatches = 8
- hasEEPROM = True
- def __init__(self):
- microchip8_splittedPMarea_hasResetPC.__init__(self,
- chipPackage="dip28",
- chipPinVCC=20,
- chipPinsVPP=1,
- chipPinGND=19,
- signature=b"\x68\x23",
- flashPageSize=0x2000,
- flashPages=1,
- eepromPageSize=256,
- eepromPages=1,
- fuseBytes=4
- )
- fuseDesc = (
- BitDescription(0, "FOSC[0], 000=LP, 001=XT, 010=HS, 011=EXTRC"),
- BitDescription(1, "FOSC[1], 100=INTOSC, 101=ECL - Low power mode"),
- BitDescription(2, "FOSC[2], 110=ECM - Medium power mode, 111=ECH - High power mode"),
- BitDescription(3, "WDTE[0], 00=WDT disabled, 11=WDT enabled"),
- BitDescription(4, "WDTE[1]"),
- BitDescription(5, "nPWRTE"),
- BitDescription(6, "MCLRE, 1=nMCLR/Vpp pin is nMCLR, weak pull-up enabled, ignored if LVP=1 "),
- BitDescription(7, "nCP 1=program memory code protection is disabled"),
- BitDescription(8, "nCPD, 1=data memory code protection is disabled"),
- BitDescription(9, "BOREN[0], 00=BOR disabled"),
- BitDescription(10, "BOREN[1]"),
- BitDescription(11, "nCLKOUTEN, 0=CLKOUT is enabled on CLKOUT pin"),
- BitDescription(12, "IESO, 0=Internal/External Switchover mode is disabled"),
- BitDescription(13, "FCMEM, 0=Fail-Safe Clock Monitor is disabled"),
- BitDescription(14, "NA"),
- BitDescription(15, "NA"),
-
- BitDescription(16, "WRT[0], 11=Write protection off"),
- BitDescription(17, "WRT[1]"),
- BitDescription(18, "Unused"),
- BitDescription(19, "Unused"),
- BitDescription(20, "VCAPEN[0] - only for PIC16F193x, 00=Vcap enabled on RA0"),
- BitDescription(21, "VCAPEN[1], 01=Vcap enabled on RA5, 10=Vcap enabled on RA6, 11=disabled "),
- BitDescription(22, "Unused"),
- BitDescription(23, "Unused"),
- BitDescription(24, "PLLEN, 0=4xPLL disabled"),
- BitDescription(25, "STVREN, 1=Stack overflow or underflow will cause a reset"),
- BitDescription(26, "BORV, 1=Brown-out Reset voltage set to 1.9V"),
- BitDescription(27, "Unused"),
- BitDescription(28, "nDEBUG, 0=ICSPCLK and ICSPDAT are dedicated to the debugger"),
- BitDescription(29, "LVP 1=Low-voltage programming enabled"),
- BitDescription(30, "NA"),
- BitDescription(31, "NA"),
- )
- ChipDescription(
- Chip_Pic16F1936dip28,
- bitfile="microchip01dip28",
- chipID="pic16f1936dip28",
- runtimeID=(0xDE07, 0x01),
- chipVendors="Microchip",
- description="PIC16F1936, PIC16LF1936",
- packages=(("dip28", ""),),
- fuseDesc=fuseDesc,
- maintainer="Pavel Stemberk <stemberk@gmail.com>",
- )
|
