123456789101112131415161718192021222324252627282930313233343536 |
- *** ***
- *** Catalyst PCIBX32-X / PCIBX64-X Control Utility ***
- *** ***
- About this software
- This program can be used to control the Catalyst PCIBX32-X and
- PCIBX64-X PCI Extender card through the parallel port interface.
- This software is run on the host-system.
- The host-system is the machine, which controlls the Extender.
- The client-system is the machine with the controller in its PCI slot.
- (The host- and client-system may be the same machine.)
- Usage
- See pcibx
- And read the manual of your PCI Extender. ;)
- Hotplug / Client-Kernel
- To be able to hotplug devices into the controller, you must load
- the "fakephp" PCI Hotplug kernel module on the client system.
- This module fakes a PCI hotplug controller.
- WARNING: Read the fakephp Manual. Be very careful when hotplugging
- a device and keep doing it in the correct order:
- 1) Unregister the device from the kernel via sysfs.
- 2) Turn the UUT Powers on the Extender OFF.
- 3) Unplug the device from the physical PCI slot.
- To plug a device in, reverse the order of the steps.
|