Crazy traceroute

What happens if a traceroute with the same TTL/hop limit is received from two different source addresses? How will they react?

crazytrace is a network simulation program that can be used to see how different ping and traceroute implementations react when the sender address is different than expected.

Building

See BUILDING.md.

How it works?

crazytrace uses several libraries and tricks to create a virtual TAP adapter behind which the simulated network is hidden.

libtuntap: This library is used to create and close the TAP device.
libtins: This library is used for packet parsing and crafting.
yaml-cpp: This library is used to read the configuration file in YAML format.
Boost.log: This library is used as a logger. Various log levels can be set in the configuration file.
Boost.Asio: This library is used to communicate with the socket of the TAP device and to receive and send several packets simultaneously (asynchronously).

Here is how the program works:

reading the configuration file
setting the log level
output of the libtuntap version
output of the configuration
creation of the TAP device
initialization of the network simulator
starting the network simulator

The following is how the network simulator works when a packet is received:

reading the packet with tins
reading the packet into a NodeRequest
generate a NodeReply using the configuration
check whether a reply should be sent 4a. If no, abort
if yes, create a NodeReply package using libtins
write the packet to the socket of the TAP device

Configuration file

The following is a example configuration file:

---
log_level: info
device_name: crazytrace
post_up_commands:
  - ip route add fd00::/64 dev crazytrace via fe80::b1:4fff:fe7e:9dc3
nodes:
  - mac: 02:B1:4F:7E:9D:C3
    addresses: [fe80::b1:4fff:fe7e:9dc3]
    hoplimit: 255
    nodes:
      - addresses: [fd00::1]
        nodes:
          - addresses: [fd00::21, fd00::22, fd00::23]
            nodes:
              - addresses: [fd00::3]
  - mac: 02:B1:4F:7E:9D:C4
    addresses: [fe80::b1:4fff:fe7e:9dc4]

This would generate the following topology:

If a node has several IPv6 addresses, it listens to all of them and responds randomly with one. If no hop limit is specified, 64 is used.

Which MAC addresses can I use without any problems?

The following belong to the locally administered range and can be used without any problems:

x2-xx-xx-xx-xx-xx
x6-xx-xx-xx-xx-xx
xA-xx-xx-xx-xx-xx
xE-xx-xx-xx-xx-xx

How do I start crazytrace?

# /path/to/crazytrace /path/to/config.yaml

README.md 2.9 KB Histórico Raw