lbwww/site/docs/hardware/e6400.md

---

title: Dell Latitude E6400 x-toc-enable: true ...

Specifications
Manufacturer	Dell
Name	Latitude E6400
Variants	E6400, E6400 XFR and E6400 ATG are supported
Released	2009
Chipset	Intel Cantiga GM45(Intel GPU)
CPU	Intel Core 2 Duo (Penryn family). A Quad-core
mod exists, replacing the Core 2 Duo with a Core Quad
Graphics	Intel GMA 4500MHD
Display	1280x800/1440x900 TFT
Memory	2 or 4GB (Upgradable to 8GB)
Architecture	x86_64
EC	SMSC MEC5035 with proprietary firmware
Original boot firmware	Dell BIOS
Intel ME/AMD PSP	Present. Can be completely disabled.
Flash chip	SOIC-8 4MiB or 2MiB+4MiB

W+: Works without blobs; 
N: Doesn't work; 
W*: Works with blobs; 
U: Untested; 
P+: Partially works; 
P*: Partially works with blobs

Features
Internal flashing with original boot firmware	W+
Display (Intel GPU)	W+
Audio	W+
RAM Init	W+
External output	W+
Display brightness	P+

Payloads supported
GRUB	Works
SeaBIOS	Works
SeaBIOS with GRUB	Works

Introduction

Known supported variants: E6400, E6400 XFR and E6400 ATG.

ONLY the Intel GPU variants are supported, at present. The Nvidia ones are not compatible, with this censored version of Libreboot.

To install Libreboot, see: E6400 installation instructions

ROM images for Dell Latitude E6400 are available for flashing in Libreboot releases, or you can compile a ROM image for installation via lbmk, see: build instructions

There are two possible flash chip sizes for the E6400: 4MiB (32Mbit) or 2+4MiB (16Mbit+32MBit). Libreboot presently supports the 4MiB version, and provides 8MiB images for those who upgrade their flash to 8MiB or 16MiB. There appears to be several possible mainboard PCBs for the E6400, which we believe mostly affects the GPU configuration and the number of available SPI flash footprints:

• LA-3801P: iGPU, possibly dual SPI (however only one may be populated)
• LA-3803P: dGPU, dual SPI (however only one may be populated)
• LA-3805P: iGPU, single SPI flash (4MiB)
• LA-3806P: dGPU, unknown SPI configuration (likely at least 4MiB)

These PCB numbers can be found either under the black plastic in the RAM slots on the bottom (CPU side) of the board, the top left corner near the VGA port (top side, under the keyboard and palmrest), or near the CPU backplate (only requires removal of the keyboard).

We believe that all boards will have at least a single 4MiB flash chip, regardless of the number of SPI footprints. This is likely the most common configuration on most available systems. The 2+4MiB configuration likely would have only been used on systems with full Intel ME firmware with AMT functionality, though this configuration has not yet been encountered.

Most people will want to use the 4MiB images.

Intel GPU: Blob-free setup (no-ME possible)

This is a GM45/PM45 platform, so completely libre initialisation in coreboot is possible, provided by default in Libreboot.

Intel GPU variants are GM45, and Nvidia ones are PM45.

Management Engine (ME) firmware removed

This port in Libreboot makes use of ich9gen from ich9utils, which you can read about in the ich9utils manual - this creates a no-ME setup. The Intel Management Engine firmware (ME) is completely removed, and the ME disabled, just like on ThinkPad X200, T400 and so on.

The E6400 laptops may come with the ME (and sometimes AMT in addition) before flashing libreboot. Dell also sold configurations with the ME completely disabled, identifiable by a yellow sticker reading "3 ME Disabled" inside the bottom panel. This config sets the MeDisable bit in the IFD and sets the ME region almost entirely to 1's, with the occasional 32-bit value (likely not executable). libreboot disables and removes it by using a modified descriptor: see ../install/ich9utils.md (contains notes, plus instructions)