hp2570p.md 2.0 KB
title: HP EliteBook 2570p x-toc-enable: true ...
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING, OR YOU MIGHT BRICK YOUR MACHINE: SAFETY PRECAUTIONS
HP EliteBook 2570p
| ***Specifications*** | |
|---------------------------|-----------------------------------|
| **Manufacturer** | HP |
| **Name** | EliteBook 2570p |
| **Released** | 2012 |
| **Chipset** | Intel QM77 |
| **CPU** | Intel Ivy Bridge, socketed |
| **Graphics** | Intel HD Graphics |
| **Display** | 12.5" 1366x768 |
| **Memory** | Up to 16GB (2x8GB) |
| **Architecture** | x86_64 |
| **EC** | KBC1126, proprietary |
| **Intel ME/AMD PSP** | Present, neutered |
| **Flash chip** | SOIC-16 16MiB |
| ***Payloads supported*** | |
|---------------------------|-------|
| **GRUB** | Works |
| **SeaBIOS** | Works |
| **SeaBIOS with GRUB** | Works |
Brief board info
Vendor info here:
https://support.hp.com/us-en/document/c03412731
Installation of Libreboot
Coreboot also has some information:
https://doc.coreboot.org/mainboard/hp/2560p.html#programming
If you're using Libreboot release ROM images, the ME image has been scrubbed and you must re-insert it. Use the information on this guide to know how to do that:
Insert vendor files on Intel Sandybridge/Ivybridge/Haswell platforms
Make sure to set the MAC address in the flash: Modify MAC addresses with nvmutil.
Refer to the Libreboot flashing guides