refc.md 6.2 KB

Tweaking the refc GC

Cycle collector

The cycle collector can be en-/disabled independently from the other parts of the garbage collector with GC_enableMarkAndSweep and GC_disableMarkAndSweep.

Soft real-time support

To enable real-time support, the symbol useRealtimeGC:idx: needs to be defined via --define:useRealtimeGC:option: (you can put this into your config file as well). With this switch the garbage collector supports the following operations:

  proc GC_setMaxPause*(maxPauseInUs: int)
  proc GC_step*(us: int, strongAdvice = false, stackSize = -1)

The unit of the parameters maxPauseInUs and us is microseconds.

These two procs are the two modus operandi of the real-time garbage collector:

(1) GC_SetMaxPause Mode

You can call `GC_SetMaxPause` at program startup and then each triggered
garbage collector run tries to not take longer than `maxPause` time. However, it is
possible (and common) that the work is nevertheless not evenly distributed
as each call to `new` can trigger the garbage collector and thus take  `maxPause`
time.

(2) GC_step Mode

This allows the garbage collector to perform some work for up to `us` time.
This is useful to call in the main loop to ensure the garbage collector can do its work.
To bind all garbage collector activity to a `GC_step` call,
deactivate the garbage collector with `GC_disable` at program startup.
If `strongAdvice` is set to `true`,
then the garbage collector will be forced to perform the collection cycle.
Otherwise, the garbage collector may decide not to do anything,
if there is not much garbage to collect.
You may also specify the current stack size via `stackSize` parameter.
It can improve performance when you know that there are no unique Nim references
below a certain point on the stack. Make sure the size you specify is greater
than the potential worst-case size.

It can improve performance when you know that there are no unique Nim
references below a certain point on the stack. Make sure the size you specify
is greater than the potential worst-case size.

These procs provide a "best effort" real-time guarantee; in particular the cycle collector is not aware of deadlines. Deactivate it to get more predictable real-time behaviour. Tests show that a 1ms max pause time will be met in almost all cases on modern CPUs (with the cycle collector disabled).

Time measurement with garbage collectors

The garbage collectors' way of measuring time uses (see lib/system/timers.nim for the implementation):

1) QueryPerformanceCounter and QueryPerformanceFrequency on Windows. 2) mach_absolute_time on Mac OS X. 3) gettimeofday on Posix systems.

As such it supports a resolution of nanoseconds internally; however, the API uses microseconds for convenience.

Define the symbol reportMissedDeadlines to make the garbage collector output whenever it missed a deadline. The reporting will be enhanced and supported by the API in later versions of the collector.

Tweaking the garbage collector

The collector checks whether there is still time left for its work after every workPackage'th iteration. This is currently set to 100 which means that up to 100 objects are traversed and freed before it checks again. Thus workPackage affects the timing granularity and may need to be tweaked in highly specialized environments or for older hardware.

Thread coordination

When the NimMain() function is called Nim initializes the garbage collector to the current thread, which is usually the main thread of your application. If your C code later spawns a different thread and calls Nim code, the garbage collector will fail to work properly and you will crash.

As long as you don't use the threadvar emulation Nim uses native thread variables, of which you get a fresh version whenever you create a thread. You can then attach a GC to this thread via

  system.setupForeignThreadGc()

It is not safe to disable the garbage collector and enable it after the call from your background thread even if the code you are calling is short lived.

Before the thread exits, you should tear down the thread's GC to prevent memory leaks by calling

  system.tearDownForeignThreadGc()

Keeping track of memory

If you need to pass around memory allocated by Nim to C, you can use the procs GC_ref and GC_unref to mark objects as referenced to avoid them being freed by the garbage collector. Other useful procs from system you can use to keep track of memory are:

  • getTotalMem() Returns the amount of total memory managed by the garbage collector.
  • getOccupiedMem() Bytes reserved by the garbage collector and used by objects.
  • getFreeMem() Bytes reserved by the garbage collector and not in use.
  • GC_getStatistics() Garbage collector statistics as a human-readable string.

These numbers are usually only for the running thread, not for the whole heap, with the exception of --mm:boehm:option: and --mm:go:option:.

In addition to GC_ref and GC_unref you can avoid the garbage collector by manually allocating memory with procs like alloc, alloc0, allocShared, allocShared0 or allocCStringArray. The garbage collector won't try to free them, you need to call their respective dealloc pairs (dealloc, deallocShared, deallocCStringArray, etc) when you are done with them or they will leak.

Heap dump

The heap dump feature is still in its infancy, but it already proved useful for us, so it might be useful for you. To get a heap dump, compile with -d:nimTypeNames:option: and call dumpNumberOfInstances at a strategic place in your program. This produces a list of the used types in your program and for every type the total amount of object instances for this type as well as the total amount of bytes these instances take up.

The numbers count the number of objects in all garbage collector heaps, they refer to all running threads, not only to the current thread. (The current thread would be the thread that calls dumpNumberOfInstances.) This might change in later versions.