DOOM-3/neo/curl/lib/http.c

/***************************************************************************
 *                                  _   _ ____  _     
 *  Project                     ___| | | |  _ \| |    
 *                             / __| | | | |_) | |    
 *                            | (__| |_| |  _ <| |___ 
 *                             \___|\___/|_| \_\_____|
 *
 * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
 *
 * This software is licensed as described in the file COPYING, which
 * you should have received as part of this distribution. The terms
 * are also available at http://curl.haxx.se/docs/copyright.html.
 * 
 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 * copies of the Software, and permit persons to whom the Software is
 * furnished to do so, under the terms of the COPYING file.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 * $Id: http.c,v 1.204 2004/03/14 18:15:04 bagder Exp $
 ***************************************************************************/

#include "setup.h"

#ifndef CURL_DISABLE_HTTP
/* -- WIN32 approved -- */
#include <stdio.h>
#include <string.h>
#include <stdarg.h>
#include <stdlib.h>
#include <ctype.h>
#include <sys/types.h>
#include <sys/stat.h>

#include <errno.h>

#if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__)
#include <time.h>
#include <io.h>
#else
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#include <sys/time.h>

#ifdef HAVE_TIME_H
#ifdef TIME_WITH_SYS_TIME
#include <time.h>
#endif
#endif

#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <netdb.h>
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_NET_IF_H
#include <net/if.h>
#endif
#include <sys/ioctl.h>
#include <signal.h>

#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif

#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif


#endif

#include "urldata.h"
#include <curl/curl.h>
#include "transfer.h"
#include "sendf.h"
#include "formdata.h"
#include "progress.h"
#include "base64.h"
#include "cookie.h"
#include "strequal.h"
#include "ssluse.h"
#include "http_digest.h"
#include "http_ntlm.h"
#include "http_negotiate.h"
#include "url.h"
#include "share.h"
#include "http.h"

#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>

/* The last #include file should be: */
#ifdef CURLDEBUG
#include "memdebug.h"
#endif

static CURLcode Curl_output_basic_proxy(struct connectdata *conn);

/*
 * This function checks the linked list of custom HTTP headers for a particular
 * header (prefix).
 */
static char *checkheaders(struct SessionHandle *data, const char *thisheader)
{
  struct curl_slist *head;
  size_t thislen = strlen(thisheader);

  for(head = data->set.headers; head; head=head->next) {
    if(strnequal(head->data, thisheader, thislen))
      return head->data;
  }
  return NULL;
}

static CURLcode Curl_output_basic(struct connectdata *conn)
{
  char *authorization;
  struct SessionHandle *data=conn->data;

  sprintf(data->state.buffer, "%s:%s", conn->user, conn->passwd);
  if(Curl_base64_encode(data->state.buffer, strlen(data->state.buffer),
                        &authorization) > 0) {
    if(conn->allocptr.userpwd)
      free(conn->allocptr.userpwd);
    conn->allocptr.userpwd = aprintf( "Authorization: Basic %s\015\012",
                                      authorization);
    free(authorization);
  }
  else
    return CURLE_OUT_OF_MEMORY;
  return CURLE_OK;
}

static CURLcode Curl_output_basic_proxy(struct connectdata *conn)
{
  char *authorization;
  struct SessionHandle *data=conn->data;

  sprintf(data->state.buffer, "%s:%s",
          conn->proxyuser, conn->proxypasswd);
  if(Curl_base64_encode(data->state.buffer, strlen(data->state.buffer),
                        &authorization) > 0) {
    Curl_safefree(conn->allocptr.proxyuserpwd);
    conn->allocptr.proxyuserpwd =
      aprintf("Proxy-authorization: Basic %s\015\012", authorization);
    free(authorization);
  }
  else
    return CURLE_OUT_OF_MEMORY;
  return CURLE_OK;
}

/*
 * Curl_http_auth_act() checks what authentication methods that are available
 * and decides which one (if any) to use. It will set 'newurl' if an auth
 * metod was picked.
 */

void Curl_http_auth_act(struct connectdata *conn)
{
  struct SessionHandle *data = conn->data;

  if(data->state.authavail) {
    /* The order of these checks is highly relevant, as this will be the order
       of preference in case of the existance of multiple accepted types. */
    if(data->state.authavail & CURLAUTH_GSSNEGOTIATE)
      data->state.authwant = CURLAUTH_GSSNEGOTIATE;
    else if(data->state.authavail & CURLAUTH_DIGEST)
      data->state.authwant = CURLAUTH_DIGEST;
    else if(data->state.authavail & CURLAUTH_NTLM)
      data->state.authwant = CURLAUTH_NTLM;
    else if(data->state.authavail & CURLAUTH_BASIC)
      data->state.authwant = CURLAUTH_BASIC;
    else
      data->state.authwant = CURLAUTH_NONE; /* clear it */

    if(data->state.authwant)
      conn->newurl = strdup(data->change.url); /* clone URL */
    data->state.authavail = CURLAUTH_NONE; /* clear it here */
  }
}

/*
 * Setup the authentication headers for the host/proxy and the correct
 * authentication method.
 */

static CURLcode http_auth_headers(struct connectdata *conn,
                                  char *request,
                                  char *path,
                                  bool *ready) /* set TRUE when the auth phase
                                           is done and ready to do the *actual*
                                           request */
{
  CURLcode result = CURLE_OK;
  struct SessionHandle *data = conn->data;
  char *auth=NULL;

  *ready = FALSE; /* default is no */

  if(!data->state.authstage) {
    if(conn->bits.httpproxy && conn->bits.proxy_user_passwd)
      Curl_http_auth_stage(data, 407);
    else if(conn->bits.user_passwd)
      Curl_http_auth_stage(data, 401);
    else {
      *ready = TRUE;
      return CURLE_OK; /* no authentication with no user or password */
    }
  }

  /* To prevent the user+password to get sent to other than the original
     host due to a location-follow, we do some weirdo checks here */
  if(!data->state.this_is_a_follow ||
     !data->state.auth_host ||
     curl_strequal(data->state.auth_host, conn->hostname) ||
     data->set.http_disable_hostname_check_before_authentication) {

  /* Send proxy authentication header if needed */
    if (data->state.authstage == 407) {
#ifdef USE_SSLEAY
      if(data->state.authwant == CURLAUTH_NTLM) {
        auth=(char *)"NTLM";
        result = Curl_output_ntlm(conn, TRUE, ready);
        if(result)
          return result;
      }
      else
#endif
      if(data->state.authwant == CURLAUTH_BASIC) {
        /* Basic */
        if(conn->bits.proxy_user_passwd &&
           !checkheaders(data, "Proxy-authorization:")) {
          auth=(char *)"Basic";
          result = Curl_output_basic_proxy(conn);
          if(result)
            return result;
        }
        *ready = TRUE;
        /* Switch to web authentication after proxy authentication is done */
        Curl_http_auth_stage(data, 401);
      }
      infof(data, "Proxy auth using %s with user '%s'\n",
            auth, conn->proxyuser?conn->proxyuser:"");
    }
    /* Send web authentication header if needed */
    if (data->state.authstage == 401) {
      auth = NULL;
#ifdef HAVE_GSSAPI
      if((data->state.authwant == CURLAUTH_GSSNEGOTIATE) &&
         data->state.negotiate.context && 
         !GSS_ERROR(data->state.negotiate.status)) {
        auth=(char *)"GSS-Negotiate";
        result = Curl_output_negotiate(conn);
        if (result)
          return result;
        *ready = TRUE;
      }
      else
#endif
#ifdef USE_SSLEAY
      if(data->state.authwant == CURLAUTH_NTLM) {
        auth=(char *)"NTLM";
        result = Curl_output_ntlm(conn, FALSE, ready);
        if(result)
          return result;
      }
      else
#endif
      {
        if((data->state.authwant == CURLAUTH_DIGEST) &&
           data->state.digest.nonce) {
          auth=(char *)"Digest";
          result = Curl_output_digest(conn,
                                      (unsigned char *)request,
                                      (unsigned char *)path);
          if(result)
            return result;
          *ready = TRUE;
        }
        else if(data->state.authwant == CURLAUTH_BASIC) {/* Basic */
          if(conn->bits.user_passwd &&
             !checkheaders(data, "Authorization:")) {
            auth=(char *)"Basic";
            result = Curl_output_basic(conn);
            if(result)
              return result;
          }
          /* basic is always ready */
          *ready = TRUE;
        }
      }
      if(auth)
        infof(data, "Server auth using %s with user '%s'\n",
              auth, conn->user);
    }
  }
  else
    *ready = TRUE;

  return result;
}


/*
 * Curl_http_auth() deals with Proxy-Authenticate: and WWW-Authenticate:
 * headers. They are dealt with both in the transfer.c main loop and in the
 * proxy CONNECT loop.
 */

CURLcode Curl_http_auth(struct connectdata *conn,
                        int httpcode,
                        char *header) /* pointing to the first non-space */
{
  /*
   * This resource requires authentication
   */
  struct SessionHandle *data = conn->data;

  long *availp;
  char *start;

  if (httpcode == 407) {
    start = header+strlen("Proxy-authenticate:");
    availp = &data->info.proxyauthavail;
  }
  else {
    start = header+strlen("WWW-Authenticate:");
    availp = &data->info.httpauthavail;
  }
  /*
   * Switch from proxy to web authentication and back if needed
   */
  if (httpcode == 407 && data->state.authstage != 407)
    Curl_http_auth_stage(data, 407);
              
  else if (httpcode == 401 && data->state.authstage != 401)
    Curl_http_auth_stage(data, 401);

  /* pass all white spaces */
  while(*start && isspace((int)*start))
    start++;

  /*
   * Here we check if we want the specific single authentiction (using ==) and
   * if we do, we initiate usage of it.
   *
   * If the provided authentication is wanted as one out of several accepted
   * types (using &), we OR this authenticaion type to the authavail
   * variable.
   */
  
#ifdef HAVE_GSSAPI
  if (checkprefix("GSS-Negotiate", start) ||
      checkprefix("Negotiate", start)) {
    *availp |= CURLAUTH_GSSNEGOTIATE;
    if(data->state.authwant == CURLAUTH_GSSNEGOTIATE) {
      /* if exactly this is wanted, go */
      int neg = Curl_input_negotiate(conn, start);
      if (neg == 0)
        conn->newurl = strdup(data->change.url);
    }
    else
      if(data->state.authwant & CURLAUTH_GSSNEGOTIATE)
        data->state.authavail |= CURLAUTH_GSSNEGOTIATE;
  }
  else
#endif
#ifdef USE_SSLEAY
    /* NTLM support requires the SSL crypto libs */
    if(checkprefix("NTLM", start)) {
      *availp |= CURLAUTH_NTLM;
      if(data->state.authwant == CURLAUTH_NTLM) {
        /* NTLM authentication is activated */
        CURLntlm ntlm =
          Curl_input_ntlm(conn, (bool)(httpcode == 407), start);
                  
        if(CURLNTLM_BAD != ntlm)
          conn->newurl = strdup(data->change.url); /* clone string */
        else
          infof(data, "Authentication problem. Ignoring this.\n");
      }
      else
        if(data->state.authwant & CURLAUTH_NTLM)
          data->state.authavail |= CURLAUTH_NTLM;
    }
    else
#endif
      if(checkprefix("Digest", start)) {
        *availp |= CURLAUTH_DIGEST;
        if(data->state.authwant == CURLAUTH_DIGEST) {
          /* Digest authentication is activated */
          CURLdigest dig = CURLDIGEST_BAD;

          if(data->state.digest.nonce)
            infof(data, "Authentication problem. Ignoring this.\n");
          else
            dig = Curl_input_digest(conn, start);
          
          if(CURLDIGEST_FINE == dig)
            /* We act on it. Store our new url, which happens to be
               the same one we already use! */
            conn->newurl = strdup(data->change.url); /* clone string */
        }
        else
          if(data->state.authwant & CURLAUTH_DIGEST) {
            /* We don't know if Digest is what we're gonna use, but we
               call this function anyway to store the digest data that
               is provided on this line, to skip the extra round-trip
               we need to do otherwise. We must sure to free this
               data! */
            Curl_input_digest(conn, start);
            data->state.authavail |= CURLAUTH_DIGEST;
          }
      }
      else if(checkprefix("Basic", start)) {
        *availp |= CURLAUTH_BASIC;
        if((data->state.authwant == CURLAUTH_BASIC) &&
           (httpcode == data->state.authstage)) {
          /* We asked for Basic authentication but got a 40X back
             anyway, which basicly means our name+password isn't
             valid. */
          data->state.authavail = CURLAUTH_NONE;
          infof(data, "Authentication problem. Ignoring this.\n");
        }
        else if(data->state.authwant & CURLAUTH_BASIC) {
          data->state.authavail |= CURLAUTH_BASIC;
        }
      }
  return CURLE_OK;
}


/* fread() emulation to provide POST and/or request data */
static size_t readmoredata(char *buffer,
                           size_t size,
                           size_t nitems,
                           void *userp)
{
  struct connectdata *conn = (struct connectdata *)userp;
  struct HTTP *http = conn->proto.http;
  size_t fullsize = size * nitems;

  if(0 == http->postsize)
    /* nothing to return */
    return 0;
  
  /* make sure that a HTTP request is never sent away chunked! */
  conn->bits.forbidchunk= (http->sending == HTTPSEND_REQUEST)?TRUE:FALSE;

  if(http->postsize <= (curl_off_t)fullsize) {
    memcpy(buffer, http->postdata, (size_t)http->postsize);
    fullsize = (size_t)http->postsize;

    if(http->backup.postsize) {
      /* move backup data into focus and continue on that */
      http->postdata = http->backup.postdata;
      http->postsize = http->backup.postsize;
      conn->fread =    http->backup.fread;
      conn->fread_in = http->backup.fread_in;

      http->sending++; /* move one step up */

      http->backup.postsize=0;
    }
    else
      http->postsize = 0;

    return fullsize;
  }

  memcpy(buffer, http->postdata, fullsize);
  http->postdata += fullsize;
  http->postsize -= fullsize;

  return fullsize;
}

/* ------------------------------------------------------------------------- */
/*
 * The add_buffer series of functions are used to build one large memory chunk
 * from repeated function invokes. Used so that the entire HTTP request can
 * be sent in one go.
 */

struct send_buffer {
  char *buffer;
  size_t size_max;
  size_t size_used;
};
typedef struct send_buffer send_buffer;

static CURLcode
 add_buffer(send_buffer *in, const void *inptr, size_t size);

/*
 * add_buffer_init() returns a fine buffer struct
 */
static
send_buffer *add_buffer_init(void)
{
  send_buffer *blonk;
  blonk=(send_buffer *)malloc(sizeof(send_buffer));
  if(blonk) {
    memset(blonk, 0, sizeof(send_buffer));
    return blonk;
  }
  return NULL; /* failed, go home */
}

/*
 * add_buffer_send() sends a buffer and frees all associated memory.
 */
static
CURLcode add_buffer_send(send_buffer *in,
                         struct connectdata *conn,
                         long *bytes_written) /* add the number of sent
                                                 bytes to this counter */
{
  ssize_t amount;
  CURLcode res;
  char *ptr;
  size_t size;
  struct HTTP *http = conn->proto.http;
  size_t sendsize;
  curl_socket_t sockfd = conn->sock[FIRSTSOCKET];

  /* The looping below is required since we use non-blocking sockets, but due
     to the circumstances we will just loop and try again and again etc */

  ptr = in->buffer;
  size = in->size_used;

  if(conn->protocol & PROT_HTTPS) {
    /* We never send more than CURL_MAX_WRITE_SIZE bytes in one single chunk
       when we speak HTTPS, as if only a fraction of it is sent now, this data
       needs to fit into the normal read-callback buffer later on and that
       buffer is using this size.
    */

    sendsize= (size > CURL_MAX_WRITE_SIZE)?CURL_MAX_WRITE_SIZE:size;

    /* OpenSSL is very picky and we must send the SAME buffer pointer to the
       library when we attempt to re-send this buffer. Sending the same data
       is not enough, we must use the exact same address. For this reason, we
       must copy the data to the uploadbuffer first, since that is the buffer
       we will be using if this send is retried later.
    */
    memcpy(conn->data->state.uploadbuffer, ptr, sendsize);
    ptr = conn->data->state.uploadbuffer;
  }
  else
    sendsize = size;
  
  res = Curl_write(conn, sockfd, ptr, sendsize, &amount);

  if(CURLE_OK == res) {

    if(conn->data->set.verbose)
      /* this data _may_ contain binary stuff */
      Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, amount);

    *bytes_written += amount;
    
    if((size_t)amount != size) {
      /* The whole request could not be sent in one system call. We must queue
         it up and send it later when we get the chance. We must not loop here
         and wait until it might work again. */

      size -= amount;

      ptr = in->buffer + amount;
    
      /* backup the currently set pointers */
      http->backup.fread = conn->fread;
      http->backup.fread_in = conn->fread_in;
      http->backup.postdata = http->postdata;
      http->backup.postsize = http->postsize;

      /* set the new pointers for the request-sending */
      conn->fread = (curl_read_callback)readmoredata;
      conn->fread_in = (void *)conn;
      http->postdata = ptr;
      http->postsize = size;

      http->send_buffer = in;
      http->sending = HTTPSEND_REQUEST;
      
      return CURLE_OK;
    }
    http->sending = HTTPSEND_BODY;
    /* the full buffer was sent, clean up and return */
  }
  if(in->buffer)
    free(in->buffer);
  free(in);

  return res;
}


/* 
 * add_bufferf() builds a buffer from the formatted input
 */
static
CURLcode add_bufferf(send_buffer *in, const char *fmt, ...)
{
  char *s;
  va_list ap;
  va_start(ap, fmt);
  s = vaprintf(fmt, ap); /* this allocs a new string to append */
  va_end(ap);

  if(s) {
    CURLcode result = add_buffer(in, s, strlen(s));
    free(s);
    if(CURLE_OK == result)
      return CURLE_OK;
  }
  /* If we failed, we cleanup the whole buffer and return error */
  if(in->buffer)
    free(in->buffer);
  free(in);
  return CURLE_OUT_OF_MEMORY;
}

/*
 * add_buffer() appends a memory chunk to the existing one
 */
static
CURLcode add_buffer(send_buffer *in, const void *inptr, size_t size)
{
  char *new_rb;
  size_t new_size;

  if(!in->buffer ||
     ((in->size_used + size) > (in->size_max - 1))) {
    new_size = (in->size_used+size)*2;
    if(in->buffer)
      /* we have a buffer, enlarge the existing one */
      new_rb = (char *)realloc(in->buffer, new_size);
    else
      /* create a new buffer */
      new_rb = (char *)malloc(new_size);

    if(!new_rb)
      return CURLE_OUT_OF_MEMORY;

    in->buffer = new_rb;
    in->size_max = new_size;
  }
  memcpy(&in->buffer[in->size_used], inptr, size);
      
  in->size_used += size;

  return CURLE_OK;
}

/* end of the add_buffer functions */
/* ------------------------------------------------------------------------- */

/*
 * Curl_compareheader()
 *
 * Returns TRUE if 'headerline' contains the 'header' with given 'content'.
 * Pass headers WITH the colon.
 */
bool
Curl_compareheader(char *headerline,    /* line to check */
                   const char *header,  /* header keyword _with_ colon */
                   const char *content) /* content string to find */
{
  /* RFC2616, section 4.2 says: "Each header field consists of a name followed
   * by a colon (":") and the field value. Field names are case-insensitive.
   * The field value MAY be preceded by any amount of LWS, though a single SP
   * is preferred." */

  size_t hlen = strlen(header);
  size_t clen;
  size_t len;
  char *start;
  char *end;

  if(!strnequal(headerline, header, hlen))
    return FALSE; /* doesn't start with header */

  /* pass the header */
  start = &headerline[hlen];

  /* pass all white spaces */
  while(*start && isspace((int)*start))
    start++;

  /* find the end of the header line */
  end = strchr(start, '\r'); /* lines end with CRLF */
  if(!end) {
    /* in case there's a non-standard compliant line here */
    end = strchr(start, '\n');

    if(!end)
      /* hm, there's no line ending here, use the zero byte! */
      end = strchr(start, '\0');
  }

  len = end-start; /* length of the content part of the input line */
  clen = strlen(content); /* length of the word to find */

  /* find the content string in the rest of the line */
  for(;len>=clen;len--, start++) {
    if(strnequal(start, content, clen))
      return TRUE; /* match! */
  }

  return FALSE; /* no match */
}

/*
 * ConnectHTTPProxyTunnel() requires that we're connected to a HTTP proxy. This
 * function will issue the necessary commands to get a seamless tunnel through
 * this proxy. After that, the socket can be used just as a normal socket.
 */

CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
                                     int sockindex,
                                     char *hostname,
                                     int remote_port)
{
  int httpcode=0;
  int subversion=0;
  struct SessionHandle *data=conn->data;
  CURLcode result;
  int res;

  size_t nread;   /* total size read */
  int perline; /* count bytes per line */
  bool keepon=TRUE;
  ssize_t gotbytes;
  char *ptr;
  long timeout = 3600; /* default timeout in seconds */
  struct timeval interval;
  fd_set rkeepfd;
  fd_set readfd;
  char *line_start;
  char *host_port;
  curl_socket_t tunnelsocket = conn->sock[sockindex];

#define SELECT_OK      0
#define SELECT_ERROR   1
#define SELECT_TIMEOUT 2
  int error = SELECT_OK;

  infof(data, "Establish HTTP proxy tunnel to %s:%d\n", hostname, remote_port);

  do {
    bool auth; /* we don't really have to know when the auth phase is done,
                  but this variable will be set to true then */

    if(conn->newurl) {
      /* This only happens if we've looped here due to authentication reasons,
         and we don't really use the newly cloned URL here then. Just free()
         it. */
      free(conn->newurl); 
      conn->newurl = NULL;
    }

    host_port = aprintf("%s:%d", hostname, remote_port);
    if(!host_port)
      return CURLE_OUT_OF_MEMORY;

    /* Setup the proxy-authorization header, if any */
    result = http_auth_headers(conn, (char *)"CONNECT", host_port, &auth);
    if(CURLE_OK == result) {

      /* OK, now send the connect request to the proxy */
      result =
        Curl_sendf(tunnelsocket, conn,
                   "CONNECT %s:%d HTTP/1.0\015\012"
                   "%s"
                   "%s"
                   "\r\n",
                   hostname, remote_port,
                   conn->bits.proxy_user_passwd?
                   conn->allocptr.proxyuserpwd:"",
                   data->set.useragent?conn->allocptr.uagent:""
                   );
      if(result)
        failf(data, "Failed sending CONNECT to proxy");
    }
    free(host_port);
    if(result)
      return result;

    FD_ZERO (&readfd);		/* clear it */
    FD_SET (tunnelsocket, &readfd);     /* read socket */

    /* get this in a backup variable to be able to restore it on each lap in
       the select() loop */
    rkeepfd = readfd;

    ptr=data->state.buffer;
    line_start = ptr;

    nread=0;
    perline=0;
    keepon=TRUE;

    while((nread<BUFSIZE) && (keepon && !error)) {
      readfd = rkeepfd;     /* set every lap */
      interval.tv_sec = 1;  /* timeout each second and check the timeout */
      interval.tv_usec = 0;

      if(data->set.timeout) {
        /* if timeout is requested, find out how much remaining time we have */
        timeout = data->set.timeout - /* timeout time */
          Curl_tvdiff(Curl_tvnow(), conn->now)/1000; /* spent time */
        if(timeout <=0 ) {
          failf(data, "Proxy connection aborted due to timeout");
          error = SELECT_TIMEOUT; /* already too little time */
          break;
        }
      }
      
      switch (select (tunnelsocket+1, &readfd, NULL, NULL, &interval)) {
      case -1: /* select() error, stop reading */
        error = SELECT_ERROR;
        failf(data, "Proxy CONNECT aborted due to select() error");
        break;
      case 0: /* timeout */
        break;
      default:
        /*
         * This code previously didn't use the kerberos sec_read() code
         * to read, but when we use Curl_read() it may do so. Do confirm
         * that this is still ok and then remove this comment!
         */
        res= Curl_read(conn, tunnelsocket, ptr, BUFSIZE-nread, &gotbytes);
        if(res< 0)
          /* EWOULDBLOCK */
          continue; /* go loop yourself */
        else if(res)
          keepon = FALSE;
        else if(gotbytes <= 0) {
          keepon = FALSE;
          error = SELECT_ERROR;
          failf(data, "Proxy CONNECT aborted");
        }
        else {
          /*
           * We got a whole chunk of data, which can be anything from one byte
           * to a set of lines and possibly just a piece of the last line.
           *
           * TODO: To make this code work less error-prone, we need to make
           * sure that we read and create full lines before we compare them,
           * as there is really nothing that stops the proxy from delivering
           * the response lines in multiple parts, each part consisting of
           * only a little piece of the line(s).  */
          int i;

          nread += gotbytes;
          for(i = 0; i < gotbytes; ptr++, i++) {
            perline++; /* amount of bytes in this line so far */
            if(*ptr=='\n') {
              char letter;
              int writetype;
            
              /* output debug output if that is requested */
              if(data->set.verbose)
                Curl_debug(data, CURLINFO_HEADER_IN, line_start, perline);

              /* send the header to the callback */
              writetype = CLIENTWRITE_HEADER;
              if(data->set.http_include_header)
                writetype |= CLIENTWRITE_BODY;

              result = Curl_client_write(data, writetype, line_start, perline);
              if(result)
                return result;

              /* Newlines are CRLF, so the CR is ignored as the line isn't
                 really terminated until the LF comes. Treat a following CR
                 as end-of-headers as well.*/

              if(('\r' == line_start[0]) ||
                 ('\n' == line_start[0])) {
                /* end of response-headers from the proxy */
                keepon=FALSE;
                break; /* breaks out of for-loop, not switch() */
              }

              /* keep a backup of the position we are about to blank */
              letter = line_start[perline];
              line_start[perline]=0; /* zero terminate the buffer */
              if((checkprefix("WWW-Authenticate:", line_start) &&
                  (401 == httpcode)) ||
                 (checkprefix("Proxy-authenticate:", line_start) &&
                  (407 == httpcode))) {
                result = Curl_http_auth(conn, httpcode, line_start);
                if(result)
                  return result;
              }
              else if(2 == sscanf(line_start, "HTTP/1.%d %d",
                                  &subversion,
                                  &httpcode)) {
                /* store the HTTP code */
                data->info.httpproxycode = httpcode;                
              }
              /* put back the letter we blanked out before */
              line_start[perline]= letter;

              perline=0; /* line starts over here */
              line_start = ptr+1; /* this skips the zero byte we wrote */
            }
          }
        }
        break;
      } /* switch */
    } /* while there's buffer left and loop is requested */

    if(error)
      return CURLE_RECV_ERROR;

    /* Deal with the possibly already received authenticate headers. 'newurl'
       is set to a new URL if we must loop. */
    Curl_http_auth_act(conn);
  
  } while(conn->newurl);

  if(200 != httpcode) {
    failf(data, "Received HTTP code %d from proxy after CONNECT", httpcode);
    return CURLE_RECV_ERROR;
  }
  
  /* If a proxy-authorization header was used for the proxy, then we should
     make sure that it isn't accidentally used for the document request
     after we've connected. So let's free and clear it here. */
  Curl_safefree(conn->allocptr.proxyuserpwd);
  conn->allocptr.proxyuserpwd = NULL;

  Curl_http_auth_stage(data, 401); /* move on to the host auth */

  infof (data, "Proxy replied OK to CONNECT request\n");
  return CURLE_OK;
}

/*
 * HTTP stuff to do at connect-time.
 */
CURLcode Curl_http_connect(struct connectdata *conn)
{
  struct SessionHandle *data;
  CURLcode result;

  data=conn->data;

  /* If we are not using a proxy and we want a secure connection,
   * perform SSL initialization & connection now.
   * If using a proxy with https, then we must tell the proxy to CONNECT
   * us to the host we want to talk to.  Only after the connect
   * has occured, can we start talking SSL
   */

  if(conn->bits.httpproxy &&
     ((conn->protocol & PROT_HTTPS) || data->set.tunnel_thru_httpproxy)) {

    /* either HTTPS over proxy, OR explicitly asked for a tunnel */
    result = Curl_ConnectHTTPProxyTunnel(conn, FIRSTSOCKET,
                                         conn->hostname, conn->remote_port);
    if(CURLE_OK != result)
      return result;
  }    

  if(conn->protocol & PROT_HTTPS) {
    /* now, perform the SSL initialization for this socket */
    result = Curl_SSLConnect(conn, FIRSTSOCKET);
    if(result)
      return result;
  }

  if(conn->bits.user_passwd && !data->state.this_is_a_follow) {
    /* Authorization: is requested, this is not a followed location, get the
       original host name */
    if (data->state.auth_host)
      /* Free to avoid leaking memory on multiple requests*/
      free(data->state.auth_host);

    data->state.auth_host = strdup(conn->hostname);
  }

  return CURLE_OK;
}

CURLcode Curl_http_done(struct connectdata *conn)
{
  struct SessionHandle *data;
  struct HTTP *http;

  data=conn->data;
  http=conn->proto.http;

  /* set the proper values (possibly modified on POST) */
  conn->fread = data->set.fread; /* restore */
  conn->fread_in = data->set.in; /* restore */

  if (http == NULL) 
    return CURLE_OK;

  if(http->send_buffer) {
    send_buffer *buff = http->send_buffer;
    
    free(buff->buffer);
    free(buff);
    http->send_buffer = NULL; /* cleaer the pointer */
  }

  if(HTTPREQ_POST_FORM == data->set.httpreq) {
    conn->bytecount = http->readbytecount + http->writebytecount;
      
    Curl_formclean(http->sendit); /* Now free that whole lot */
  }
  else if(HTTPREQ_PUT == data->set.httpreq)
    conn->bytecount = http->readbytecount + http->writebytecount;

  if(!conn->bits.retry &&
     !(http->readbytecount + conn->headerbytecount)) {
    /* If this connection isn't simply closed to be retried, AND nothing was
       read from the HTTP server, this can't be right so we return an error
       here */
    failf(data, "Empty reply from server");
    return CURLE_GOT_NOTHING;
  }

  return CURLE_OK;
}

void Curl_http_auth_stage(struct SessionHandle *data,
                          int stage)
{
  curlassert((stage == 401) || (stage == 407));

  /* We set none, one or more bits for which authentication types we accept
     for this stage. */
  data->state.authwant = (stage == 401)?
    data->set.httpauth:data->set.proxyauth;

  data->state.authstage = stage;
  data->state.authavail = CURLAUTH_NONE; /* no type available yet */
}

CURLcode Curl_http(struct connectdata *conn)
{
  struct SessionHandle *data=conn->data;
  char *buf = data->state.buffer; /* this is a short cut to the buffer */
  CURLcode result=CURLE_OK;
  struct HTTP *http;
  struct Cookie *co=NULL; /* no cookies from start */
  char *ppath = conn->ppath; /* three previous function arguments */
  char *host = conn->name;
  const char *te = ""; /* tranfer-encoding */
  char *ptr;
  char *request;
  bool authdone=TRUE; /* if the authentication phase is done */

  if(!conn->proto.http) {
    /* Only allocate this struct if we don't already have it! */

    http = (struct HTTP *)malloc(sizeof(struct HTTP));
    if(!http)
      return CURLE_OUT_OF_MEMORY;
    memset(http, 0, sizeof(struct HTTP));
    conn->proto.http = http;
  }
  else
    http = conn->proto.http;

  /* We default to persistant connections */
  conn->bits.close = FALSE;

  if ( (conn->protocol&(PROT_HTTP|PROT_FTP)) &&
       data->set.upload) {
    data->set.httpreq = HTTPREQ_PUT;
  }

  request = data->set.customrequest?
    data->set.customrequest:
    (data->set.no_body?(char *)"HEAD":
     ((HTTPREQ_POST == data->set.httpreq) ||
      (HTTPREQ_POST_FORM == data->set.httpreq))?(char *)"POST":
     (HTTPREQ_PUT == data->set.httpreq)?(char *)"PUT":(char *)"GET");
  
  /* The User-Agent string has been built in url.c already, because it might
     have been used in the proxy connect, but if we have got a header with
     the user-agent string specified, we erase the previously made string
     here. */
  if(checkheaders(data, "User-Agent:") && conn->allocptr.uagent) {
    free(conn->allocptr.uagent);
    conn->allocptr.uagent=NULL;
  }

  /* setup the authentication headers */
  result = http_auth_headers(conn, request, ppath, &authdone);
  if(result)
    return result;

  Curl_safefree(conn->allocptr.ref);
  if(data->change.referer && !checkheaders(data, "Referer:"))
    conn->allocptr.ref = aprintf("Referer: %s\015\012", data->change.referer);
  else
    conn->allocptr.ref = NULL;

  Curl_safefree(conn->allocptr.cookie);
  if(data->set.cookie && !checkheaders(data, "Cookie:"))
    conn->allocptr.cookie = aprintf("Cookie: %s\015\012", data->set.cookie);
  else
    conn->allocptr.cookie = NULL;

  if(!conn->bits.upload_chunky && (data->set.httpreq != HTTPREQ_GET)) {
    /* not a chunky transfer yet, but data is to be sent */
    ptr = checkheaders(data, "Transfer-Encoding:");
    if(ptr) {
      /* Some kind of TE is requested, check if 'chunked' is chosen */
      conn->bits.upload_chunky =
        Curl_compareheader(ptr, "Transfer-Encoding:", "chunked");
      te = "";
    }
  }
  else if(conn->bits.upload_chunky) {
    /* RFC2616 section 4.4:
       Messages MUST NOT include both a Content-Length header field and a
       non-identity transfer-coding. If the message does include a non-
       identity transfer-coding, the Content-Length MUST be ignored. */

    if(!checkheaders(data, "Transfer-Encoding:")) {
      te = "Transfer-Encoding: chunked\r\n";
    }
    else {
      te = "";
      conn->bits.upload_chunky = FALSE; /* transfer-encoding was disabled,
                                           so don't chunkify this! */
    }
  }

  ptr = checkheaders(data, "Host:");
  if(ptr && !data->state.this_is_a_follow) {
    /* If we have a given custom Host: header, we extract the host name in
       order to possibly use it for cookie reasons later on. We only allow the
       custom Host: header if this is NOT a redirect, as setting Host: in the
       redirected request is being out on thin ice. */
    char *start = ptr+strlen("Host:");
    while(*start && isspace((int)*start ))
      start++;
    ptr = start; /* start host-scanning here */

    /* scan through the string to find the end (space or colon) */
    while(*ptr && !isspace((int)*ptr) && !(':'==*ptr))
      ptr++;
    
    if(ptr != start) {
      size_t len=ptr-start;
      conn->allocptr.cookiehost = malloc(len+1);
      if(!conn->allocptr.cookiehost)
        return CURLE_OUT_OF_MEMORY;
      memcpy(conn->allocptr.cookiehost, start, len);
      conn->allocptr.cookiehost[len]=0;
    }
  }    
  else {
    Curl_safefree(conn->allocptr.host);

    /* When building Host: headers, we must put the host name within
       [brackets] if the host name is a plain IPv6-address. RFC2732-style. */
       
    if(((conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTPS)) ||
       (!(conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTP)) )
      /* If (HTTPS on port 443) OR (non-HTTPS on port 80) then don't include
         the port number in the host string */
      conn->allocptr.host = aprintf("Host: %s%s%s\r\n",
                                    conn->bits.ipv6_ip?"[":"",
                                    host,
                                    conn->bits.ipv6_ip?"]":"");
    else
      conn->allocptr.host = aprintf("Host: %s%s%s:%d\r\n",
                                    conn->bits.ipv6_ip?"[":"",
                                    host,
                                    conn->bits.ipv6_ip?"]":"",
                                    conn->remote_port);

    if(!conn->allocptr.host)
      /* without Host: we can't make a nice request */
      return CURLE_OUT_OF_MEMORY;
  }

  if(data->cookies) {
    Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE);
    co = Curl_cookie_getlist(data->cookies,
                             conn->allocptr.cookiehost?
                             conn->allocptr.cookiehost:host, ppath,
                             (bool)(conn->protocol&PROT_HTTPS?TRUE:FALSE));
    Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE);
  }

  if (conn->bits.httpproxy &&
      !data->set.tunnel_thru_httpproxy &&
      !(conn->protocol&PROT_HTTPS))  {
    /* The path sent to the proxy is in fact the entire URL */
    ppath = data->change.url;
  }
  if(HTTPREQ_POST_FORM == data->set.httpreq) {
    /* we must build the whole darned post sequence first, so that we have
       a size of the whole shebang before we start to send it */
     result = Curl_getFormData(&http->sendit, data->set.httppost,
                               &http->postsize);
     if(CURLE_OK != result) {
       /* Curl_getFormData() doesn't use failf() */
       failf(data, "failed creating formpost data");
       return result;
     }
  }


  if(!checkheaders(data, "Pragma:"))
    http->p_pragma = "Pragma: no-cache\r\n";

  if(!checkheaders(data, "Accept:"))
    http->p_accept = "Accept: */*\r\n";

  if(( (HTTPREQ_POST == data->set.httpreq) ||
       (HTTPREQ_POST_FORM == data->set.httpreq) ||
       (HTTPREQ_PUT == data->set.httpreq) ) &&
     conn->resume_from) {
    /**********************************************************************
     * Resuming upload in HTTP means that we PUT or POST and that we have
     * got a resume_from value set. The resume value has already created
     * a Range: header that will be passed along. We need to "fast forward"
     * the file the given number of bytes and decrease the assume upload
     * file size before we continue this venture in the dark lands of HTTP.
     *********************************************************************/
   
    if(conn->resume_from < 0 ) {
      /*
       * This is meant to get the size of the present remote-file by itself.
       * We don't support this now. Bail out!
       */
       conn->resume_from = 0;
    }

    if(conn->resume_from) {
      /* do we still game? */
      curl_off_t passed=0;

      /* Now, let's read off the proper amount of bytes from the
         input. If we knew it was a proper file we could've just
         fseek()ed but we only have a stream here */
      do {
        size_t readthisamountnow = (size_t)(conn->resume_from - passed);
        size_t actuallyread;

        if(readthisamountnow > BUFSIZE)
          readthisamountnow = BUFSIZE;

        actuallyread =
          data->set.fread(data->state.buffer, 1, (size_t)readthisamountnow,
                          data->set.in);

        passed += actuallyread;
        if(actuallyread != readthisamountnow) {
          failf(data, "Could only read %" FORMAT_OFF_T
                " bytes from the input",
                passed);
          return CURLE_READ_ERROR;
        }
      } while(passed != conn->resume_from); /* loop until done */

      /* now, decrease the size of the read */
      if(data->set.infilesize>0) {
        data->set.infilesize -= conn->resume_from;

        if(data->set.infilesize <= 0) {
          failf(data, "File already completely uploaded");
          return CURLE_PARTIAL_FILE;
        }
      }
      /* we've passed, proceed as normal */
    }
  }
  if(conn->bits.use_range) {
    /*
     * A range is selected. We use different headers whether we're downloading
     * or uploading and we always let customized headers override our internal
     * ones if any such are specified.
     */
    if((data->set.httpreq == HTTPREQ_GET) &&
       !checkheaders(data, "Range:")) {
      /* if a line like this was already allocated, free the previous one */
      if(conn->allocptr.rangeline)
        free(conn->allocptr.rangeline);
      conn->allocptr.rangeline = aprintf("Range: bytes=%s\r\n", conn->range);
    }
    else if((data->set.httpreq != HTTPREQ_GET) &&
            !checkheaders(data, "Content-Range:")) {

      if(conn->resume_from) {
        /* This is because "resume" was selected */
        curl_off_t total_expected_size=
          conn->resume_from + data->set.infilesize;
        conn->allocptr.rangeline =
	    aprintf("Content-Range: bytes %s%" FORMAT_OFF_T
                    "/%" FORMAT_OFF_T "\r\n",
		    conn->range, total_expected_size-1,
		    total_expected_size);
      }
      else {
        /* Range was selected and then we just pass the incoming range and 
           append total size */
        conn->allocptr.rangeline =
	    aprintf("Content-Range: bytes %s/%" FORMAT_OFF_T "\r\n",
		    conn->range, data->set.infilesize);
      }
    }
  }

  {
    /* Use 1.1 unless the use specificly asked for 1.0 */
    const char *httpstring=
      data->set.httpversion==CURL_HTTP_VERSION_1_0?"1.0":"1.1";

    send_buffer *req_buffer;
    struct curl_slist *headers=data->set.headers;
    curl_off_t postsize; /* off_t type to be able to hold a large file size */

    /* initialize a dynamic send-buffer */
    req_buffer = add_buffer_init();

    if(!req_buffer)
      return CURLE_OUT_OF_MEMORY;

    /* add the main request stuff */
    result =
      add_bufferf(req_buffer,
                  "%s " /* GET/HEAD/POST/PUT */
                  "%s HTTP/%s\r\n" /* path + HTTP version */
                  "%s" /* proxyuserpwd */
                  "%s" /* userpwd */
                  "%s" /* range */
                  "%s" /* user agent */
                  "%s" /* cookie */
                  "%s" /* host */
                  "%s" /* pragma */
                  "%s" /* accept */
                  "%s" /* accept-encoding */
                  "%s" /* referer */
                  "%s",/* transfer-encoding */

                request,
                ppath,
                httpstring,
                (conn->bits.httpproxy && conn->allocptr.proxyuserpwd)?
                conn->allocptr.proxyuserpwd:"",
                conn->allocptr.userpwd?conn->allocptr.userpwd:"",
                (conn->bits.use_range && conn->allocptr.rangeline)?
                conn->allocptr.rangeline:"",
                (data->set.useragent && *data->set.useragent && conn->allocptr.uagent)?
                conn->allocptr.uagent:"",
                (conn->allocptr.cookie?conn->allocptr.cookie:""), /* Cookie: <data> */
                (conn->allocptr.host?conn->allocptr.host:""), /* Host: host */
                http->p_pragma?http->p_pragma:"",
                http->p_accept?http->p_accept:"",
                (data->set.encoding && *data->set.encoding && conn->allocptr.accept_encoding)?
                conn->allocptr.accept_encoding:"", /* 08/28/02 jhrg */
                (data->change.referer && conn->allocptr.ref)?conn->allocptr.ref:"" /* Referer: <data> <CRLF> */,
                te
                );

    if(result)
      return result;

    if(co) {
      int count=0;
      struct Cookie *store=co;
      /* now loop through all cookies that matched */
      while(co) {
        if(co->value) {
          if(0 == count) {
            add_bufferf(req_buffer, "Cookie: ");
          }
          add_bufferf(req_buffer,
                      "%s%s=%s", count?"; ":"", co->name, co->value);
          count++;
        }
        co = co->next; /* next cookie please */
      }
      if(count) {
        add_buffer(req_buffer, "\r\n", 2);
      }
      Curl_cookie_freelist(store); /* free the cookie list */
      co=NULL;
    }

    if(data->set.timecondition) {
      struct tm *thistime;

      /* Phil Karn (Fri, 13 Apr 2001) pointed out that the If-Modified-Since
       * header family should have their times set in GMT as RFC2616 defines:
       * "All HTTP date/time stamps MUST be represented in Greenwich Mean Time
       * (GMT), without exception. For the purposes of HTTP, GMT is exactly
       * equal to UTC (Coordinated Universal Time)." (see page 20 of RFC2616).
       */

#ifdef HAVE_GMTIME_R
      /* thread-safe version */
      struct tm keeptime;
      thistime = (struct tm *)gmtime_r(&data->set.timevalue, &keeptime);
#else
      thistime = gmtime(&data->set.timevalue);
#endif

#ifdef HAVE_STRFTIME
      /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */
      strftime(buf, BUFSIZE-1, "%a, %d %b %Y %H:%M:%S GMT", thistime);
#else
      /* TODO: Right, we *could* write a replacement here */
      strcpy(buf, "no strftime() support");
#endif
      switch(data->set.timecondition) {
      case CURL_TIMECOND_IFMODSINCE:
      default:
        add_bufferf(req_buffer,
                    "If-Modified-Since: %s\r\n", buf);
        break;
      case CURL_TIMECOND_IFUNMODSINCE:
        add_bufferf(req_buffer,
                    "If-Unmodified-Since: %s\r\n", buf);
        break;
      case CURL_TIMECOND_LASTMOD:
        add_bufferf(req_buffer,
                    "Last-Modified: %s\r\n", buf);
        break;
      }
    }

    while(headers) {
      ptr = strchr(headers->data, ':');
      if(ptr) {
        /* we require a colon for this to be a true header */

        ptr++; /* pass the colon */
        while(*ptr && isspace((int)*ptr))
          ptr++;

        if(*ptr) {
          /* only send this if the contents was non-blank */

          add_bufferf(req_buffer, "%s\r\n", headers->data);
        }
      }
      headers = headers->next;
    }

    http->postdata = NULL;  /* nothing to post at this point */
    Curl_pgrsSetUploadSize(data, 0); /* upload size is 0 atm */

    /* If 'authdone' is still FALSE, we must not set the write socket index to
       the Curl_transfer() call below, as we're not ready to actually upload
       any data yet. */

    switch(data->set.httpreq) {

    case HTTPREQ_POST_FORM:
      if(Curl_FormInit(&http->form, http->sendit)) {
        failf(data, "Internal HTTP POST error!");
        return CURLE_HTTP_POST_ERROR;
      }

      /* set the read function to read from the generated form data */
      conn->fread = (curl_read_callback)Curl_FormReader;
      conn->fread_in = &http->form;

      http->sending = HTTPSEND_BODY;

      if(!conn->bits.upload_chunky)
        /* only add Content-Length if not uploading chunked */
        add_bufferf(req_buffer,
                    "Content-Length: %" FORMAT_OFF_T "\r\n", http->postsize);

      if(!checkheaders(data, "Expect:")) {
        /* if not disabled explicitly we add a Expect: 100-continue
           to the headers which actually speeds up post operations (as
           there is one packet coming back from the web server) */
        add_bufferf(req_buffer,
                    "Expect: 100-continue\r\n");
        data->set.expect100header = TRUE;
      }

      if(!checkheaders(data, "Content-Type:")) {
        /* Get Content-Type: line from Curl_FormReadOneLine, which happens
           to always be the first line. We can know this for sure since
           we always build the formpost linked list the same way!

           The Content-Type header line also contains the MIME boundary
           string etc why disabling this header is likely to not make things
           work, but we support it anyway.
        */
        char contentType[256];
        size_t linelength=0;
        linelength = Curl_FormReadOneLine(contentType,
                                          sizeof(contentType),
                                          1,
                                          (FILE *)&http->form);
        if(!linelength) {
          failf(data, "Could not get Content-Type header line!");
          return CURLE_HTTP_POST_ERROR;
        }
        add_buffer(req_buffer, contentType, linelength);
      }

      /* make the request end in a true CRLF */
      add_buffer(req_buffer, "\r\n", 2);

      /* set upload size to the progress meter */
      Curl_pgrsSetUploadSize(data, http->postsize);

      /* fire away the whole request to the server */
      result = add_buffer_send(req_buffer, conn, 
                               &data->info.request_size);
      if(result)
        failf(data, "Failed sending POST request");
      else
        /* setup variables for the upcoming transfer */
        result = Curl_Transfer(conn, FIRSTSOCKET, -1, TRUE,
                               &http->readbytecount,
                               authdone?FIRSTSOCKET:-1,
                               authdone?&http->writebytecount:NULL);
      if(result) {
        Curl_formclean(http->sendit); /* free that whole lot */
        return result;
      }
      break;

    case HTTPREQ_PUT: /* Let's PUT the data to the server! */

      if((data->set.infilesize>0) && !conn->bits.upload_chunky)
        /* only add Content-Length if not uploading chunked */
        add_bufferf(req_buffer,
                    "Content-Length: %" FORMAT_OFF_T "\r\n", /* size */
                    data->set.infilesize );

      if(!checkheaders(data, "Expect:")) {
        /* if not disabled explicitly we add a Expect: 100-continue
           to the headers which actually speeds up post operations (as
           there is one packet coming back from the web server) */
        add_bufferf(req_buffer,
                    "Expect: 100-continue\r\n");
        data->set.expect100header = TRUE;
      }

      add_buffer(req_buffer, "\r\n", 2); /* end of headers */

      /* set the upload size to the progress meter */
      Curl_pgrsSetUploadSize(data, data->set.infilesize);

      /* this sends the buffer and frees all the buffer resources */
      result = add_buffer_send(req_buffer, conn,
                               &data->info.request_size);
      if(result)
        failf(data, "Failed sending POST request");
      else
        /* prepare for transfer */
        result = Curl_Transfer(conn, FIRSTSOCKET, -1, TRUE,
                               &http->readbytecount,
                               authdone?FIRSTSOCKET:-1,
                               authdone?&http->writebytecount:NULL);
      if(result)
        return result;
      break;

    case HTTPREQ_POST:
      /* this is the simple POST, using x-www-form-urlencoded style */

      /* store the size of the postfields */
      postsize = data->set.postfieldsize?
        data->set.postfieldsize:
        (data->set.postfields?(curl_off_t)strlen(data->set.postfields):0);
      
      if(!conn->bits.upload_chunky) {
        /* We only set Content-Length and allow a custom Content-Length if
           we don't upload data chunked, as RFC2616 forbids us to set both
           kinds of headers (Transfer-Encoding: chunked and Content-Length) */

        if(!checkheaders(data, "Content-Length:"))
          /* we allow replacing this header, although it isn't very wise to
             actually set your own */
          add_bufferf(req_buffer, "Content-Length: %" FORMAT_OFF_T"\r\n",
                      postsize);
      }

      if(!checkheaders(data, "Content-Type:"))
        add_bufferf(req_buffer,
                    "Content-Type: application/x-www-form-urlencoded\r\n");

      if(data->set.postfields) {

        if(authdone && (postsize < (100*1024))) {
          /* If we're not done with the authentication phase, we don't expect
             to actually send off any data yet. Hence, we delay the sending of
             the body until we receive that friendly 100-continue response */
             
          /* The post data is less than 100K, then append it to the header.
             This limit is no magic limit but only set to prevent really huge
             POSTs to get the data duplicated with malloc() and family. */

          add_buffer(req_buffer, "\r\n", 2); /* end of headers! */

          if(!conn->bits.upload_chunky)
            /* We're not sending it 'chunked', append it to the request
               already now to reduce the number if send() calls */
            add_buffer(req_buffer, data->set.postfields, (size_t)postsize);
          else {
            /* Append the POST data chunky-style */
            add_bufferf(req_buffer, "%x\r\n", (int)postsize);
            add_buffer(req_buffer, data->set.postfields, (size_t)postsize);
            add_buffer(req_buffer, "\r\n0\r\n\r\n", 7); /* end of a chunked
                                                           transfer stream */
          }
        }
        else {
          /* A huge POST coming up, do data separate from the request */
          http->postsize = postsize;
          http->postdata = data->set.postfields;

          http->sending = HTTPSEND_BODY;

          conn->fread = (curl_read_callback)readmoredata;
          conn->fread_in = (void *)conn;

          /* set the upload size to the progress meter */
          Curl_pgrsSetUploadSize(data, http->postsize);

          if(!authdone && !checkheaders(data, "Expect:")) {
            /* if not disabled explicitly we add a Expect: 100-continue to the
               headers which actually speeds up post operations (as there is
               one packet coming back from the web server) */
            add_bufferf(req_buffer,
                        "Expect: 100-continue\r\n");
            data->set.expect100header = TRUE;
          }

          add_buffer(req_buffer, "\r\n", 2); /* end of headers! */
        }
      }
      else {
        add_buffer(req_buffer, "\r\n", 2); /* end of headers! */

        /* set the upload size to the progress meter */
        Curl_pgrsSetUploadSize(data, data->set.infilesize);

        /* set the pointer to mark that we will send the post body using
           the read callback */
        http->postdata = (char *)&http->postdata;
      }
      /* issue the request */
      result = add_buffer_send(req_buffer, conn,
                               &data->info.request_size);

      if(result)
        failf(data, "Failed sending HTTP POST request");
      else
        result =
          Curl_Transfer(conn, FIRSTSOCKET, -1, TRUE,
                        &http->readbytecount,
                        http->postdata?FIRSTSOCKET:-1,
                        http->postdata?&http->writebytecount:NULL);
      break;

    default:
      add_buffer(req_buffer, "\r\n", 2);
      
      /* issue the request */
      result = add_buffer_send(req_buffer, conn,
                               &data->info.request_size);

      if(result)
        failf(data, "Failed sending HTTP request");
      else
        /* HTTP GET/HEAD download: */
        result = Curl_Transfer(conn, FIRSTSOCKET, -1, TRUE,
                               &http->readbytecount,
                               http->postdata?FIRSTSOCKET:-1,
                               http->postdata?&http->writebytecount:NULL);
    }
    if(result)
      return result;
  }

  return CURLE_OK;
}
#endif