123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930 |
- /*
- * Generic pwmlib implementation
- *
- * Copyright (C) 2011 Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2011-2012 Avionic Design GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- #include <linux/module.h>
- #include <linux/pwm.h>
- #include <linux/radix-tree.h>
- #include <linux/list.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/slab.h>
- #include <linux/device.h>
- #include <linux/debugfs.h>
- #include <linux/seq_file.h>
- #include <dt-bindings/pwm/pwm.h>
- #define MAX_PWMS 1024
- static DEFINE_MUTEX(pwm_lookup_lock);
- static LIST_HEAD(pwm_lookup_list);
- static DEFINE_MUTEX(pwm_lock);
- static LIST_HEAD(pwm_chips);
- static DECLARE_BITMAP(allocated_pwms, MAX_PWMS);
- static RADIX_TREE(pwm_tree, GFP_KERNEL);
- static struct pwm_device *pwm_to_device(unsigned int pwm)
- {
- return radix_tree_lookup(&pwm_tree, pwm);
- }
- static int alloc_pwms(int pwm, unsigned int count)
- {
- unsigned int from = 0;
- unsigned int start;
- if (pwm >= MAX_PWMS)
- return -EINVAL;
- if (pwm >= 0)
- from = pwm;
- start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, from,
- count, 0);
- if (pwm >= 0 && start != pwm)
- return -EEXIST;
- if (start + count > MAX_PWMS)
- return -ENOSPC;
- return start;
- }
- static void free_pwms(struct pwm_chip *chip)
- {
- unsigned int i;
- for (i = 0; i < chip->npwm; i++) {
- struct pwm_device *pwm = &chip->pwms[i];
- radix_tree_delete(&pwm_tree, pwm->pwm);
- }
- bitmap_clear(allocated_pwms, chip->base, chip->npwm);
- kfree(chip->pwms);
- chip->pwms = NULL;
- }
- static struct pwm_chip *pwmchip_find_by_name(const char *name)
- {
- struct pwm_chip *chip;
- if (!name)
- return NULL;
- mutex_lock(&pwm_lock);
- list_for_each_entry(chip, &pwm_chips, list) {
- const char *chip_name = dev_name(chip->dev);
- if (chip_name && strcmp(chip_name, name) == 0) {
- mutex_unlock(&pwm_lock);
- return chip;
- }
- }
- mutex_unlock(&pwm_lock);
- return NULL;
- }
- static int pwm_device_request(struct pwm_device *pwm, const char *label)
- {
- int err;
- if (test_bit(PWMF_REQUESTED, &pwm->flags))
- return -EBUSY;
- if (!try_module_get(pwm->chip->ops->owner))
- return -ENODEV;
- if (pwm->chip->ops->request) {
- err = pwm->chip->ops->request(pwm->chip, pwm);
- if (err) {
- module_put(pwm->chip->ops->owner);
- return err;
- }
- }
- set_bit(PWMF_REQUESTED, &pwm->flags);
- pwm->label = label;
- return 0;
- }
- struct pwm_device *
- of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
- {
- struct pwm_device *pwm;
- if (pc->of_pwm_n_cells < 3)
- return ERR_PTR(-EINVAL);
- if (args->args[0] >= pc->npwm)
- return ERR_PTR(-EINVAL);
- pwm = pwm_request_from_chip(pc, args->args[0], NULL);
- if (IS_ERR(pwm))
- return pwm;
- pwm_set_period(pwm, args->args[1]);
- if (args->args[2] & PWM_POLARITY_INVERTED)
- pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
- else
- pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
- return pwm;
- }
- EXPORT_SYMBOL_GPL(of_pwm_xlate_with_flags);
- static struct pwm_device *
- of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
- {
- struct pwm_device *pwm;
- if (pc->of_pwm_n_cells < 2)
- return ERR_PTR(-EINVAL);
- if (args->args[0] >= pc->npwm)
- return ERR_PTR(-EINVAL);
- pwm = pwm_request_from_chip(pc, args->args[0], NULL);
- if (IS_ERR(pwm))
- return pwm;
- pwm_set_period(pwm, args->args[1]);
- return pwm;
- }
- static void of_pwmchip_add(struct pwm_chip *chip)
- {
- if (!chip->dev || !chip->dev->of_node)
- return;
- if (!chip->of_xlate) {
- chip->of_xlate = of_pwm_simple_xlate;
- chip->of_pwm_n_cells = 2;
- }
- of_node_get(chip->dev->of_node);
- }
- static void of_pwmchip_remove(struct pwm_chip *chip)
- {
- if (chip->dev)
- of_node_put(chip->dev->of_node);
- }
- /**
- * pwm_set_chip_data() - set private chip data for a PWM
- * @pwm: PWM device
- * @data: pointer to chip-specific data
- */
- int pwm_set_chip_data(struct pwm_device *pwm, void *data)
- {
- if (!pwm)
- return -EINVAL;
- pwm->chip_data = data;
- return 0;
- }
- EXPORT_SYMBOL_GPL(pwm_set_chip_data);
- /**
- * pwm_get_chip_data() - get private chip data for a PWM
- * @pwm: PWM device
- */
- void *pwm_get_chip_data(struct pwm_device *pwm)
- {
- return pwm ? pwm->chip_data : NULL;
- }
- EXPORT_SYMBOL_GPL(pwm_get_chip_data);
- /**
- * pwmchip_add_with_polarity() - register a new PWM chip
- * @chip: the PWM chip to add
- * @polarity: initial polarity of PWM channels
- *
- * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base
- * will be used. The initial polarity for all channels is specified by the
- * @polarity parameter.
- */
- int pwmchip_add_with_polarity(struct pwm_chip *chip,
- enum pwm_polarity polarity)
- {
- struct pwm_device *pwm;
- unsigned int i;
- int ret;
- if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
- !chip->ops->enable || !chip->ops->disable || !chip->npwm)
- return -EINVAL;
- mutex_lock(&pwm_lock);
- ret = alloc_pwms(chip->base, chip->npwm);
- if (ret < 0)
- goto out;
- chip->pwms = kzalloc(chip->npwm * sizeof(*pwm), GFP_KERNEL);
- if (!chip->pwms) {
- ret = -ENOMEM;
- goto out;
- }
- chip->base = ret;
- for (i = 0; i < chip->npwm; i++) {
- pwm = &chip->pwms[i];
- pwm->chip = chip;
- pwm->pwm = chip->base + i;
- pwm->hwpwm = i;
- pwm->polarity = polarity;
- radix_tree_insert(&pwm_tree, pwm->pwm, pwm);
- }
- bitmap_set(allocated_pwms, chip->base, chip->npwm);
- INIT_LIST_HEAD(&chip->list);
- list_add(&chip->list, &pwm_chips);
- ret = 0;
- if (IS_ENABLED(CONFIG_OF))
- of_pwmchip_add(chip);
- pwmchip_sysfs_export(chip);
- out:
- mutex_unlock(&pwm_lock);
- return ret;
- }
- EXPORT_SYMBOL_GPL(pwmchip_add_with_polarity);
- /**
- * pwmchip_add() - register a new PWM chip
- * @chip: the PWM chip to add
- *
- * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base
- * will be used. The initial polarity for all channels is normal.
- */
- int pwmchip_add(struct pwm_chip *chip)
- {
- return pwmchip_add_with_polarity(chip, PWM_POLARITY_NORMAL);
- }
- EXPORT_SYMBOL_GPL(pwmchip_add);
- /**
- * pwmchip_remove() - remove a PWM chip
- * @chip: the PWM chip to remove
- *
- * Removes a PWM chip. This function may return busy if the PWM chip provides
- * a PWM device that is still requested.
- */
- int pwmchip_remove(struct pwm_chip *chip)
- {
- unsigned int i;
- int ret = 0;
- mutex_lock(&pwm_lock);
- for (i = 0; i < chip->npwm; i++) {
- struct pwm_device *pwm = &chip->pwms[i];
- if (test_bit(PWMF_REQUESTED, &pwm->flags)) {
- ret = -EBUSY;
- goto out;
- }
- }
- list_del_init(&chip->list);
- if (IS_ENABLED(CONFIG_OF))
- of_pwmchip_remove(chip);
- free_pwms(chip);
- pwmchip_sysfs_unexport(chip);
- out:
- mutex_unlock(&pwm_lock);
- return ret;
- }
- EXPORT_SYMBOL_GPL(pwmchip_remove);
- /**
- * pwm_request() - request a PWM device
- * @pwm_id: global PWM device index
- * @label: PWM device label
- *
- * This function is deprecated, use pwm_get() instead.
- */
- struct pwm_device *pwm_request(int pwm, const char *label)
- {
- struct pwm_device *dev;
- int err;
- if (pwm < 0 || pwm >= MAX_PWMS)
- return ERR_PTR(-EINVAL);
- mutex_lock(&pwm_lock);
- dev = pwm_to_device(pwm);
- if (!dev) {
- dev = ERR_PTR(-EPROBE_DEFER);
- goto out;
- }
- err = pwm_device_request(dev, label);
- if (err < 0)
- dev = ERR_PTR(err);
- out:
- mutex_unlock(&pwm_lock);
- return dev;
- }
- EXPORT_SYMBOL_GPL(pwm_request);
- /**
- * pwm_request_from_chip() - request a PWM device relative to a PWM chip
- * @chip: PWM chip
- * @index: per-chip index of the PWM to request
- * @label: a literal description string of this PWM
- *
- * Returns the PWM at the given index of the given PWM chip. A negative error
- * code is returned if the index is not valid for the specified PWM chip or
- * if the PWM device cannot be requested.
- */
- struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
- unsigned int index,
- const char *label)
- {
- struct pwm_device *pwm;
- int err;
- if (!chip || index >= chip->npwm)
- return ERR_PTR(-EINVAL);
- mutex_lock(&pwm_lock);
- pwm = &chip->pwms[index];
- err = pwm_device_request(pwm, label);
- if (err < 0)
- pwm = ERR_PTR(err);
- mutex_unlock(&pwm_lock);
- return pwm;
- }
- EXPORT_SYMBOL_GPL(pwm_request_from_chip);
- /**
- * pwm_free() - free a PWM device
- * @pwm: PWM device
- *
- * This function is deprecated, use pwm_put() instead.
- */
- void pwm_free(struct pwm_device *pwm)
- {
- pwm_put(pwm);
- }
- EXPORT_SYMBOL_GPL(pwm_free);
- /**
- * pwm_config() - change a PWM device configuration
- * @pwm: PWM device
- * @duty_ns: "on" time (in nanoseconds)
- * @period_ns: duration (in nanoseconds) of one cycle
- */
- int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
- {
- int err;
- if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns)
- return -EINVAL;
- err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
- if (err)
- return err;
- pwm->duty_cycle = duty_ns;
- pwm->period = period_ns;
- return 0;
- }
- EXPORT_SYMBOL_GPL(pwm_config);
- /**
- * pwm_set_polarity() - configure the polarity of a PWM signal
- * @pwm: PWM device
- * @polarity: new polarity of the PWM signal
- *
- * Note that the polarity cannot be configured while the PWM device is enabled
- */
- int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
- {
- int err;
- if (!pwm || !pwm->chip->ops)
- return -EINVAL;
- if (!pwm->chip->ops->set_polarity)
- return -ENOSYS;
- if (test_bit(PWMF_ENABLED, &pwm->flags))
- return -EBUSY;
- err = pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
- if (err)
- return err;
- pwm->polarity = polarity;
- return 0;
- }
- EXPORT_SYMBOL_GPL(pwm_set_polarity);
- /**
- * pwm_enable() - start a PWM output toggling
- * @pwm: PWM device
- */
- int pwm_enable(struct pwm_device *pwm)
- {
- if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags))
- return pwm->chip->ops->enable(pwm->chip, pwm);
- return pwm ? 0 : -EINVAL;
- }
- EXPORT_SYMBOL_GPL(pwm_enable);
- /**
- * pwm_disable() - stop a PWM output toggling
- * @pwm: PWM device
- */
- void pwm_disable(struct pwm_device *pwm)
- {
- if (pwm && test_and_clear_bit(PWMF_ENABLED, &pwm->flags))
- pwm->chip->ops->disable(pwm->chip, pwm);
- }
- EXPORT_SYMBOL_GPL(pwm_disable);
- static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
- {
- struct pwm_chip *chip;
- mutex_lock(&pwm_lock);
- list_for_each_entry(chip, &pwm_chips, list)
- if (chip->dev && chip->dev->of_node == np) {
- mutex_unlock(&pwm_lock);
- return chip;
- }
- mutex_unlock(&pwm_lock);
- return ERR_PTR(-EPROBE_DEFER);
- }
- /**
- * of_pwm_get() - request a PWM via the PWM framework
- * @np: device node to get the PWM from
- * @con_id: consumer name
- *
- * Returns the PWM device parsed from the phandle and index specified in the
- * "pwms" property of a device tree node or a negative error-code on failure.
- * Values parsed from the device tree are stored in the returned PWM device
- * object.
- *
- * If con_id is NULL, the first PWM device listed in the "pwms" property will
- * be requested. Otherwise the "pwm-names" property is used to do a reverse
- * lookup of the PWM index. This also means that the "pwm-names" property
- * becomes mandatory for devices that look up the PWM device via the con_id
- * parameter.
- */
- struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id)
- {
- struct pwm_device *pwm = NULL;
- struct of_phandle_args args;
- struct pwm_chip *pc;
- int index = 0;
- int err;
- if (con_id) {
- index = of_property_match_string(np, "pwm-names", con_id);
- if (index < 0)
- return ERR_PTR(index);
- }
- err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index,
- &args);
- if (err) {
- pr_debug("%s(): can't parse \"pwms\" property\n", __func__);
- return ERR_PTR(err);
- }
- pc = of_node_to_pwmchip(args.np);
- if (IS_ERR(pc)) {
- pr_debug("%s(): PWM chip not found\n", __func__);
- pwm = ERR_CAST(pc);
- goto put;
- }
- if (args.args_count != pc->of_pwm_n_cells) {
- pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name,
- args.np->full_name);
- pwm = ERR_PTR(-EINVAL);
- goto put;
- }
- pwm = pc->of_xlate(pc, &args);
- if (IS_ERR(pwm))
- goto put;
- /*
- * If a consumer name was not given, try to look it up from the
- * "pwm-names" property if it exists. Otherwise use the name of
- * the user device node.
- */
- if (!con_id) {
- err = of_property_read_string_index(np, "pwm-names", index,
- &con_id);
- if (err < 0)
- con_id = np->name;
- }
- pwm->label = con_id;
- put:
- of_node_put(args.np);
- return pwm;
- }
- EXPORT_SYMBOL_GPL(of_pwm_get);
- /**
- * pwm_add_table() - register PWM device consumers
- * @table: array of consumers to register
- * @num: number of consumers in table
- */
- void pwm_add_table(struct pwm_lookup *table, size_t num)
- {
- mutex_lock(&pwm_lookup_lock);
- while (num--) {
- list_add_tail(&table->list, &pwm_lookup_list);
- table++;
- }
- mutex_unlock(&pwm_lookup_lock);
- }
- /**
- * pwm_remove_table() - unregister PWM device consumers
- * @table: array of consumers to unregister
- * @num: number of consumers in table
- */
- void pwm_remove_table(struct pwm_lookup *table, size_t num)
- {
- mutex_lock(&pwm_lookup_lock);
- while (num--) {
- list_del(&table->list);
- table++;
- }
- mutex_unlock(&pwm_lookup_lock);
- }
- /**
- * pwm_get() - look up and request a PWM device
- * @dev: device for PWM consumer
- * @con_id: consumer name
- *
- * Lookup is first attempted using DT. If the device was not instantiated from
- * a device tree, a PWM chip and a relative index is looked up via a table
- * supplied by board setup code (see pwm_add_table()).
- *
- * Once a PWM chip has been found the specified PWM device will be requested
- * and is ready to be used.
- */
- struct pwm_device *pwm_get(struct device *dev, const char *con_id)
- {
- struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER);
- const char *dev_id = dev ? dev_name(dev) : NULL;
- struct pwm_chip *chip = NULL;
- unsigned int best = 0;
- struct pwm_lookup *p, *chosen = NULL;
- unsigned int match;
- /* look up via DT first */
- if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
- return of_pwm_get(dev->of_node, con_id);
- /*
- * We look up the provider in the static table typically provided by
- * board setup code. We first try to lookup the consumer device by
- * name. If the consumer device was passed in as NULL or if no match
- * was found, we try to find the consumer by directly looking it up
- * by name.
- *
- * If a match is found, the provider PWM chip is looked up by name
- * and a PWM device is requested using the PWM device per-chip index.
- *
- * The lookup algorithm was shamelessly taken from the clock
- * framework:
- *
- * We do slightly fuzzy matching here:
- * An entry with a NULL ID is assumed to be a wildcard.
- * If an entry has a device ID, it must match
- * If an entry has a connection ID, it must match
- * Then we take the most specific entry - with the following order
- * of precedence: dev+con > dev only > con only.
- */
- mutex_lock(&pwm_lookup_lock);
- list_for_each_entry(p, &pwm_lookup_list, list) {
- match = 0;
- if (p->dev_id) {
- if (!dev_id || strcmp(p->dev_id, dev_id))
- continue;
- match += 2;
- }
- if (p->con_id) {
- if (!con_id || strcmp(p->con_id, con_id))
- continue;
- match += 1;
- }
- if (match > best) {
- chosen = p;
- if (match != 3)
- best = match;
- else
- break;
- }
- }
- if (!chosen)
- goto out;
- chip = pwmchip_find_by_name(chosen->provider);
- if (!chip)
- goto out;
- pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id);
- if (IS_ERR(pwm))
- goto out;
- pwm_set_period(pwm, chosen->period);
- pwm_set_polarity(pwm, chosen->polarity);
- out:
- mutex_unlock(&pwm_lookup_lock);
- return pwm;
- }
- EXPORT_SYMBOL_GPL(pwm_get);
- /**
- * pwm_put() - release a PWM device
- * @pwm: PWM device
- */
- void pwm_put(struct pwm_device *pwm)
- {
- if (!pwm)
- return;
- mutex_lock(&pwm_lock);
- if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) {
- pr_warn("PWM device already freed\n");
- goto out;
- }
- if (pwm->chip->ops->free)
- pwm->chip->ops->free(pwm->chip, pwm);
- pwm->label = NULL;
- module_put(pwm->chip->ops->owner);
- out:
- mutex_unlock(&pwm_lock);
- }
- EXPORT_SYMBOL_GPL(pwm_put);
- static void devm_pwm_release(struct device *dev, void *res)
- {
- pwm_put(*(struct pwm_device **)res);
- }
- /**
- * devm_pwm_get() - resource managed pwm_get()
- * @dev: device for PWM consumer
- * @con_id: consumer name
- *
- * This function performs like pwm_get() but the acquired PWM device will
- * automatically be released on driver detach.
- */
- struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id)
- {
- struct pwm_device **ptr, *pwm;
- ptr = devres_alloc(devm_pwm_release, sizeof(*ptr), GFP_KERNEL);
- if (!ptr)
- return ERR_PTR(-ENOMEM);
- pwm = pwm_get(dev, con_id);
- if (!IS_ERR(pwm)) {
- *ptr = pwm;
- devres_add(dev, ptr);
- } else {
- devres_free(ptr);
- }
- return pwm;
- }
- EXPORT_SYMBOL_GPL(devm_pwm_get);
- /**
- * devm_of_pwm_get() - resource managed of_pwm_get()
- * @dev: device for PWM consumer
- * @np: device node to get the PWM from
- * @con_id: consumer name
- *
- * This function performs like of_pwm_get() but the acquired PWM device will
- * automatically be released on driver detach.
- */
- struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
- const char *con_id)
- {
- struct pwm_device **ptr, *pwm;
- ptr = devres_alloc(devm_pwm_release, sizeof(*ptr), GFP_KERNEL);
- if (!ptr)
- return ERR_PTR(-ENOMEM);
- pwm = of_pwm_get(np, con_id);
- if (!IS_ERR(pwm)) {
- *ptr = pwm;
- devres_add(dev, ptr);
- } else {
- devres_free(ptr);
- }
- return pwm;
- }
- EXPORT_SYMBOL_GPL(devm_of_pwm_get);
- static int devm_pwm_match(struct device *dev, void *res, void *data)
- {
- struct pwm_device **p = res;
- if (WARN_ON(!p || !*p))
- return 0;
- return *p == data;
- }
- /**
- * devm_pwm_put() - resource managed pwm_put()
- * @dev: device for PWM consumer
- * @pwm: PWM device
- *
- * Release a PWM previously allocated using devm_pwm_get(). Calling this
- * function is usually not needed because devm-allocated resources are
- * automatically released on driver detach.
- */
- void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
- {
- WARN_ON(devres_release(dev, devm_pwm_release, devm_pwm_match, pwm));
- }
- EXPORT_SYMBOL_GPL(devm_pwm_put);
- /**
- * pwm_can_sleep() - report whether PWM access will sleep
- * @pwm: PWM device
- *
- * It returns true if accessing the PWM can sleep, false otherwise.
- */
- bool pwm_can_sleep(struct pwm_device *pwm)
- {
- return pwm->chip->can_sleep;
- }
- EXPORT_SYMBOL_GPL(pwm_can_sleep);
- #ifdef CONFIG_DEBUG_FS
- static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
- {
- unsigned int i;
- for (i = 0; i < chip->npwm; i++) {
- struct pwm_device *pwm = &chip->pwms[i];
- seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label);
- if (test_bit(PWMF_REQUESTED, &pwm->flags))
- seq_puts(s, " requested");
- if (test_bit(PWMF_ENABLED, &pwm->flags))
- seq_puts(s, " enabled");
- seq_puts(s, "\n");
- }
- }
- static void *pwm_seq_start(struct seq_file *s, loff_t *pos)
- {
- mutex_lock(&pwm_lock);
- s->private = "";
- return seq_list_start(&pwm_chips, *pos);
- }
- static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos)
- {
- s->private = "\n";
- return seq_list_next(v, &pwm_chips, pos);
- }
- static void pwm_seq_stop(struct seq_file *s, void *v)
- {
- mutex_unlock(&pwm_lock);
- }
- static int pwm_seq_show(struct seq_file *s, void *v)
- {
- struct pwm_chip *chip = list_entry(v, struct pwm_chip, list);
- seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private,
- chip->dev->bus ? chip->dev->bus->name : "no-bus",
- dev_name(chip->dev), chip->npwm,
- (chip->npwm != 1) ? "s" : "");
- if (chip->ops->dbg_show)
- chip->ops->dbg_show(chip, s);
- else
- pwm_dbg_show(chip, s);
- return 0;
- }
- static const struct seq_operations pwm_seq_ops = {
- .start = pwm_seq_start,
- .next = pwm_seq_next,
- .stop = pwm_seq_stop,
- .show = pwm_seq_show,
- };
- static int pwm_seq_open(struct inode *inode, struct file *file)
- {
- return seq_open(file, &pwm_seq_ops);
- }
- static const struct file_operations pwm_debugfs_ops = {
- .owner = THIS_MODULE,
- .open = pwm_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
- };
- static int __init pwm_debugfs_init(void)
- {
- debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL,
- &pwm_debugfs_ops);
- return 0;
- }
- subsys_initcall(pwm_debugfs_init);
- #endif /* CONFIG_DEBUG_FS */
|