123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179 |
- /*
- * Copyright (C) 2013 TangoTec Ltd.
- * Author: Baruch Siach <baruch@tkos.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Driver for the Xtensa LX4 GPIO32 Option
- *
- * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
- *
- * GPIO32 is a standard optional extension to the Xtensa architecture core that
- * provides preconfigured output and input ports for intra SoC signaling. The
- * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
- * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
- * driver treats input and output states as two distinct devices.
- *
- * Access to GPIO32 specific instructions is controlled by the CPENABLE
- * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
- * disables access to all coprocessors. This driver sets the CPENABLE bit
- * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
- * CPENABLE state after that.
- *
- * This driver is currently incompatible with SMP. The GPIO32 extension is not
- * guaranteed to be available in all cores. Moreover, each core controls a
- * different set of IO wires. A theoretical SMP aware version of this driver
- * would need to have a per core workqueue to do the actual GPIO manipulation.
- */
- #include <linux/err.h>
- #include <linux/module.h>
- #include <linux/gpio.h>
- #include <linux/bitops.h>
- #include <linux/platform_device.h>
- #include <asm/coprocessor.h> /* CPENABLE read/write macros */
- #ifndef XCHAL_CP_ID_XTIOP
- #error GPIO32 option is not enabled for your xtensa core variant
- #endif
- #if XCHAL_HAVE_CP
- static inline unsigned long enable_cp(unsigned long *cpenable)
- {
- unsigned long flags;
- local_irq_save(flags);
- RSR_CPENABLE(*cpenable);
- WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
- return flags;
- }
- static inline void disable_cp(unsigned long flags, unsigned long cpenable)
- {
- WSR_CPENABLE(cpenable);
- local_irq_restore(flags);
- }
- #else
- static inline unsigned long enable_cp(unsigned long *cpenable)
- {
- *cpenable = 0; /* avoid uninitialized value warning */
- return 0;
- }
- static inline void disable_cp(unsigned long flags, unsigned long cpenable)
- {
- }
- #endif /* XCHAL_HAVE_CP */
- static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
- {
- return 1; /* input only */
- }
- static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
- {
- unsigned long flags, saved_cpenable;
- u32 impwire;
- flags = enable_cp(&saved_cpenable);
- __asm__ __volatile__("read_impwire %0" : "=a" (impwire));
- disable_cp(flags, saved_cpenable);
- return !!(impwire & BIT(offset));
- }
- static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
- int value)
- {
- BUG(); /* output only; should never be called */
- }
- static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
- {
- return 0; /* output only */
- }
- static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
- {
- unsigned long flags, saved_cpenable;
- u32 expstate;
- flags = enable_cp(&saved_cpenable);
- __asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
- disable_cp(flags, saved_cpenable);
- return !!(expstate & BIT(offset));
- }
- static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
- int value)
- {
- unsigned long flags, saved_cpenable;
- u32 mask = BIT(offset);
- u32 val = value ? BIT(offset) : 0;
- flags = enable_cp(&saved_cpenable);
- __asm__ __volatile__("wrmsk_expstate %0, %1"
- :: "a" (val), "a" (mask));
- disable_cp(flags, saved_cpenable);
- }
- static struct gpio_chip impwire_chip = {
- .label = "impwire",
- .base = -1,
- .ngpio = 32,
- .get_direction = xtensa_impwire_get_direction,
- .get = xtensa_impwire_get_value,
- .set = xtensa_impwire_set_value,
- };
- static struct gpio_chip expstate_chip = {
- .label = "expstate",
- .base = -1,
- .ngpio = 32,
- .get_direction = xtensa_expstate_get_direction,
- .get = xtensa_expstate_get_value,
- .set = xtensa_expstate_set_value,
- };
- static int xtensa_gpio_probe(struct platform_device *pdev)
- {
- int ret;
- ret = gpiochip_add(&impwire_chip);
- if (ret)
- return ret;
- return gpiochip_add(&expstate_chip);
- }
- static struct platform_driver xtensa_gpio_driver = {
- .driver = {
- .name = "xtensa-gpio",
- },
- .probe = xtensa_gpio_probe,
- };
- static int __init xtensa_gpio_init(void)
- {
- struct platform_device *pdev;
- pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return platform_driver_register(&xtensa_gpio_driver);
- }
- device_initcall(xtensa_gpio_init);
- MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
- MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
- MODULE_LICENSE("GPL");
|