123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516 |
- /*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
- #include <linux/err.h>
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/io.h>
- #include <linux/irq.h>
- #include <linux/irqdomain.h>
- #include <linux/irqchip/chained_irq.h>
- #include <linux/gpio.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/basic_mmio_gpio.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/module.h>
- #include <asm-generic/bug.h>
- enum mxc_gpio_hwtype {
- IMX1_GPIO, /* runs on i.mx1 */
- IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
- IMX31_GPIO, /* runs on i.mx31 */
- IMX35_GPIO, /* runs on all other i.mx */
- };
- /* device type dependent stuff */
- struct mxc_gpio_hwdata {
- unsigned dr_reg;
- unsigned gdir_reg;
- unsigned psr_reg;
- unsigned icr1_reg;
- unsigned icr2_reg;
- unsigned imr_reg;
- unsigned isr_reg;
- int edge_sel_reg;
- unsigned low_level;
- unsigned high_level;
- unsigned rise_edge;
- unsigned fall_edge;
- };
- struct mxc_gpio_port {
- struct list_head node;
- void __iomem *base;
- int irq;
- int irq_high;
- struct irq_domain *domain;
- struct bgpio_chip bgc;
- u32 both_edges;
- };
- static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
- .dr_reg = 0x1c,
- .gdir_reg = 0x00,
- .psr_reg = 0x24,
- .icr1_reg = 0x28,
- .icr2_reg = 0x2c,
- .imr_reg = 0x30,
- .isr_reg = 0x34,
- .edge_sel_reg = -EINVAL,
- .low_level = 0x03,
- .high_level = 0x02,
- .rise_edge = 0x00,
- .fall_edge = 0x01,
- };
- static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
- .dr_reg = 0x00,
- .gdir_reg = 0x04,
- .psr_reg = 0x08,
- .icr1_reg = 0x0c,
- .icr2_reg = 0x10,
- .imr_reg = 0x14,
- .isr_reg = 0x18,
- .edge_sel_reg = -EINVAL,
- .low_level = 0x00,
- .high_level = 0x01,
- .rise_edge = 0x02,
- .fall_edge = 0x03,
- };
- static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
- .dr_reg = 0x00,
- .gdir_reg = 0x04,
- .psr_reg = 0x08,
- .icr1_reg = 0x0c,
- .icr2_reg = 0x10,
- .imr_reg = 0x14,
- .isr_reg = 0x18,
- .edge_sel_reg = 0x1c,
- .low_level = 0x00,
- .high_level = 0x01,
- .rise_edge = 0x02,
- .fall_edge = 0x03,
- };
- static enum mxc_gpio_hwtype mxc_gpio_hwtype;
- static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
- #define GPIO_DR (mxc_gpio_hwdata->dr_reg)
- #define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg)
- #define GPIO_PSR (mxc_gpio_hwdata->psr_reg)
- #define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg)
- #define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg)
- #define GPIO_IMR (mxc_gpio_hwdata->imr_reg)
- #define GPIO_ISR (mxc_gpio_hwdata->isr_reg)
- #define GPIO_EDGE_SEL (mxc_gpio_hwdata->edge_sel_reg)
- #define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level)
- #define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level)
- #define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge)
- #define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
- #define GPIO_INT_BOTH_EDGES 0x4
- static const struct platform_device_id mxc_gpio_devtype[] = {
- {
- .name = "imx1-gpio",
- .driver_data = IMX1_GPIO,
- }, {
- .name = "imx21-gpio",
- .driver_data = IMX21_GPIO,
- }, {
- .name = "imx31-gpio",
- .driver_data = IMX31_GPIO,
- }, {
- .name = "imx35-gpio",
- .driver_data = IMX35_GPIO,
- }, {
- /* sentinel */
- }
- };
- static const struct of_device_id mxc_gpio_dt_ids[] = {
- { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
- { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
- { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
- { .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
- { /* sentinel */ }
- };
- /*
- * MX2 has one interrupt *for all* gpio ports. The list is used
- * to save the references to all ports, so that mx2_gpio_irq_handler
- * can walk through all interrupt status registers.
- */
- static LIST_HEAD(mxc_gpio_ports);
- /* Note: This driver assumes 32 GPIOs are handled in one register */
- static int gpio_set_irq_type(struct irq_data *d, u32 type)
- {
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct mxc_gpio_port *port = gc->private;
- u32 bit, val;
- u32 gpio_idx = d->hwirq;
- u32 gpio = port->bgc.gc.base + gpio_idx;
- int edge;
- void __iomem *reg = port->base;
- port->both_edges &= ~(1 << gpio_idx);
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- edge = GPIO_INT_RISE_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- edge = GPIO_INT_FALL_EDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- if (GPIO_EDGE_SEL >= 0) {
- edge = GPIO_INT_BOTH_EDGES;
- } else {
- val = gpio_get_value(gpio);
- if (val) {
- edge = GPIO_INT_LOW_LEV;
- pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
- } else {
- edge = GPIO_INT_HIGH_LEV;
- pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
- }
- port->both_edges |= 1 << gpio_idx;
- }
- break;
- case IRQ_TYPE_LEVEL_LOW:
- edge = GPIO_INT_LOW_LEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- edge = GPIO_INT_HIGH_LEV;
- break;
- default:
- return -EINVAL;
- }
- if (GPIO_EDGE_SEL >= 0) {
- val = readl(port->base + GPIO_EDGE_SEL);
- if (edge == GPIO_INT_BOTH_EDGES)
- writel(val | (1 << gpio_idx),
- port->base + GPIO_EDGE_SEL);
- else
- writel(val & ~(1 << gpio_idx),
- port->base + GPIO_EDGE_SEL);
- }
- if (edge != GPIO_INT_BOTH_EDGES) {
- reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
- bit = gpio_idx & 0xf;
- val = readl(reg) & ~(0x3 << (bit << 1));
- writel(val | (edge << (bit << 1)), reg);
- }
- writel(1 << gpio_idx, port->base + GPIO_ISR);
- return 0;
- }
- static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
- {
- void __iomem *reg = port->base;
- u32 bit, val;
- int edge;
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
- val = readl(reg);
- edge = (val >> (bit << 1)) & 3;
- val &= ~(0x3 << (bit << 1));
- if (edge == GPIO_INT_HIGH_LEV) {
- edge = GPIO_INT_LOW_LEV;
- pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
- } else if (edge == GPIO_INT_LOW_LEV) {
- edge = GPIO_INT_HIGH_LEV;
- pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
- } else {
- pr_err("mxc: invalid configuration for GPIO %d: %x\n",
- gpio, edge);
- return;
- }
- writel(val | (edge << (bit << 1)), reg);
- }
- /* handle 32 interrupts in one status register */
- static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
- {
- while (irq_stat != 0) {
- int irqoffset = fls(irq_stat) - 1;
- if (port->both_edges & (1 << irqoffset))
- mxc_flip_edge(port, irqoffset);
- generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
- irq_stat &= ~(1 << irqoffset);
- }
- }
- /* MX1 and MX3 has one interrupt *per* gpio port */
- static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
- {
- u32 irq_stat;
- struct mxc_gpio_port *port = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
- mxc_gpio_irq_handler(port, irq_stat);
- chained_irq_exit(chip, desc);
- }
- /* MX2 has one interrupt *for all* gpio ports */
- static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
- {
- u32 irq_msk, irq_stat;
- struct mxc_gpio_port *port;
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- /* walk through all interrupt status registers */
- list_for_each_entry(port, &mxc_gpio_ports, node) {
- irq_msk = readl(port->base + GPIO_IMR);
- if (!irq_msk)
- continue;
- irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
- if (irq_stat)
- mxc_gpio_irq_handler(port, irq_stat);
- }
- chained_irq_exit(chip, desc);
- }
- /*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param irq interrupt source number
- * @param enable enable as wake-up if equal to non-zero
- * @return This function returns 0 on success.
- */
- static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
- {
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct mxc_gpio_port *port = gc->private;
- u32 gpio_idx = d->hwirq;
- if (enable) {
- if (port->irq_high && (gpio_idx >= 16))
- enable_irq_wake(port->irq_high);
- else
- enable_irq_wake(port->irq);
- } else {
- if (port->irq_high && (gpio_idx >= 16))
- disable_irq_wake(port->irq_high);
- else
- disable_irq_wake(port->irq);
- }
- return 0;
- }
- static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
- {
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
- port->base, handle_level_irq);
- gc->private = port;
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_clr_bit;
- ct->chip.irq_unmask = irq_gc_mask_set_bit;
- ct->chip.irq_set_type = gpio_set_irq_type;
- ct->chip.irq_set_wake = gpio_set_wake_irq;
- ct->regs.ack = GPIO_ISR;
- ct->regs.mask = GPIO_IMR;
- irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
- IRQ_NOREQUEST, 0);
- }
- static void mxc_gpio_get_hw(struct platform_device *pdev)
- {
- const struct of_device_id *of_id =
- of_match_device(mxc_gpio_dt_ids, &pdev->dev);
- enum mxc_gpio_hwtype hwtype;
- if (of_id)
- pdev->id_entry = of_id->data;
- hwtype = pdev->id_entry->driver_data;
- if (mxc_gpio_hwtype) {
- /*
- * The driver works with a reasonable presupposition,
- * that is all gpio ports must be the same type when
- * running on one soc.
- */
- BUG_ON(mxc_gpio_hwtype != hwtype);
- return;
- }
- if (hwtype == IMX35_GPIO)
- mxc_gpio_hwdata = &imx35_gpio_hwdata;
- else if (hwtype == IMX31_GPIO)
- mxc_gpio_hwdata = &imx31_gpio_hwdata;
- else
- mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;
- mxc_gpio_hwtype = hwtype;
- }
- static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
- {
- struct bgpio_chip *bgc = to_bgpio_chip(gc);
- struct mxc_gpio_port *port =
- container_of(bgc, struct mxc_gpio_port, bgc);
- return irq_find_mapping(port->domain, offset);
- }
- static int mxc_gpio_probe(struct platform_device *pdev)
- {
- struct device_node *np = pdev->dev.of_node;
- struct mxc_gpio_port *port;
- struct resource *iores;
- int irq_base;
- int err;
- mxc_gpio_get_hw(pdev);
- port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
- if (!port)
- return -ENOMEM;
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- port->base = devm_ioremap_resource(&pdev->dev, iores);
- if (IS_ERR(port->base))
- return PTR_ERR(port->base);
- port->irq_high = platform_get_irq(pdev, 1);
- port->irq = platform_get_irq(pdev, 0);
- if (port->irq < 0)
- return port->irq;
- /* disable the interrupt and clear the status */
- writel(0, port->base + GPIO_IMR);
- writel(~0, port->base + GPIO_ISR);
- if (mxc_gpio_hwtype == IMX21_GPIO) {
- /*
- * Setup one handler for all GPIO interrupts. Actually setting
- * the handler is needed only once, but doing it for every port
- * is more robust and easier.
- */
- irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
- } else {
- /* setup one handler for each entry */
- irq_set_chained_handler_and_data(port->irq,
- mx3_gpio_irq_handler, port);
- if (port->irq_high > 0)
- /* setup handler for GPIO 16 to 31 */
- irq_set_chained_handler_and_data(port->irq_high,
- mx3_gpio_irq_handler,
- port);
- }
- err = bgpio_init(&port->bgc, &pdev->dev, 4,
- port->base + GPIO_PSR,
- port->base + GPIO_DR, NULL,
- port->base + GPIO_GDIR, NULL,
- BGPIOF_READ_OUTPUT_REG_SET);
- if (err)
- goto out_bgio;
- port->bgc.gc.to_irq = mxc_gpio_to_irq;
- port->bgc.gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
- pdev->id * 32;
- err = gpiochip_add(&port->bgc.gc);
- if (err)
- goto out_bgpio_remove;
- irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
- if (irq_base < 0) {
- err = irq_base;
- goto out_gpiochip_remove;
- }
- port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- if (!port->domain) {
- err = -ENODEV;
- goto out_irqdesc_free;
- }
- /* gpio-mxc can be a generic irq chip */
- mxc_gpio_init_gc(port, irq_base);
- list_add_tail(&port->node, &mxc_gpio_ports);
- return 0;
- out_irqdesc_free:
- irq_free_descs(irq_base, 32);
- out_gpiochip_remove:
- gpiochip_remove(&port->bgc.gc);
- out_bgpio_remove:
- bgpio_remove(&port->bgc);
- out_bgio:
- dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
- return err;
- }
- static struct platform_driver mxc_gpio_driver = {
- .driver = {
- .name = "gpio-mxc",
- .of_match_table = mxc_gpio_dt_ids,
- },
- .probe = mxc_gpio_probe,
- .id_table = mxc_gpio_devtype,
- };
- static int __init gpio_mxc_init(void)
- {
- return platform_driver_register(&mxc_gpio_driver);
- }
- postcore_initcall(gpio_mxc_init);
- MODULE_AUTHOR("Freescale Semiconductor, "
- "Daniel Mack <danielncaiaq.de>, "
- "Juergen Beisert <kernel@pengutronix.de>");
- MODULE_DESCRIPTION("Freescale MXC GPIO");
- MODULE_LICENSE("GPL");
|