123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115 |
- /*
- * Copyright (C) 2006 Juergen Beisert, Pengutronix
- * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
- * Copyright (C) 2009 Wolfram Sang, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Check max730x.c for further details.
- */
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/mutex.h>
- #include <linux/slab.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/max7301.h>
- /* A write to the MAX7301 means one message with one transfer */
- static int max7301_spi_write(struct device *dev, unsigned int reg,
- unsigned int val)
- {
- struct spi_device *spi = to_spi_device(dev);
- u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
- return spi_write(spi, (const u8 *)&word, sizeof(word));
- }
- /* A read from the MAX7301 means two transfers; here, one message each */
- static int max7301_spi_read(struct device *dev, unsigned int reg)
- {
- int ret;
- u16 word;
- struct spi_device *spi = to_spi_device(dev);
- word = 0x8000 | (reg << 8);
- ret = spi_write(spi, (const u8 *)&word, sizeof(word));
- if (ret)
- return ret;
- /*
- * This relies on the fact, that a transfer with NULL tx_buf shifts out
- * zero bytes (=NOOP for MAX7301)
- */
- ret = spi_read(spi, (u8 *)&word, sizeof(word));
- if (ret)
- return ret;
- return word & 0xff;
- }
- static int max7301_probe(struct spi_device *spi)
- {
- struct max7301 *ts;
- int ret;
- /* bits_per_word cannot be configured in platform data */
- spi->bits_per_word = 16;
- ret = spi_setup(spi);
- if (ret < 0)
- return ret;
- ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL);
- if (!ts)
- return -ENOMEM;
- ts->read = max7301_spi_read;
- ts->write = max7301_spi_write;
- ts->dev = &spi->dev;
- ret = __max730x_probe(ts);
- return ret;
- }
- static int max7301_remove(struct spi_device *spi)
- {
- return __max730x_remove(&spi->dev);
- }
- static const struct spi_device_id max7301_id[] = {
- { "max7301", 0 },
- { }
- };
- MODULE_DEVICE_TABLE(spi, max7301_id);
- static struct spi_driver max7301_driver = {
- .driver = {
- .name = "max7301",
- .owner = THIS_MODULE,
- },
- .probe = max7301_probe,
- .remove = max7301_remove,
- .id_table = max7301_id,
- };
- static int __init max7301_init(void)
- {
- return spi_register_driver(&max7301_driver);
- }
- /* register after spi postcore initcall and before
- * subsys initcalls that may rely on these GPIOs
- */
- subsys_initcall(max7301_init);
- static void __exit max7301_exit(void)
- {
- spi_unregister_driver(&max7301_driver);
- }
- module_exit(max7301_exit);
- MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
- MODULE_LICENSE("GPL v2");
- MODULE_DESCRIPTION("MAX7301 GPIO-Expander");
|